IN 67-68 front clip trim/emblems - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HeavyMetalChevy · 02-25-2012, 12:54 AM

This entire clip is sold and Grille emblem. Up for grabs: OBO on all

Both fender emblems- $26.78 shipped-
Both NICE Grille Hoops- $90/pr $50/pc. sold to MARIOS68PANEL thanks.
Front Hood Molding-$20 dinged up on pass. side
NICE "CHEVROLET"- $46.35 set shipped

HeavyMetalChevy · 02-25-2012, 01:00 AM

ummmhmmm

MARIOS68PANEL · 02-25-2012, 01:01 AM

If the grill hoops have no dings I will take them. 90.00 shipped to 95660?

HeavyMetalChevy · 02-25-2012, 01:01 AM

angles son!!!

HeavyMetalChevy · 02-25-2012, 01:03 AM

Quote:

Originally Posted by MARIOS68PANEL

If the grill hoops have no dings I will take them. 90.00 shipped to 95660?

I will check hoops tomorrow in daylight and let you know on the other parts you mentioned as well.

MARIOS68PANEL · 02-25-2012, 01:04 AM

How much to include the driver side eyebrow?

MARIOS68PANEL · 02-25-2012, 01:06 AM

if dings and scratches are minor let me know.

1971short4X4 · 02-25-2012, 01:08 AM

I need a couple of the triangle spacers inside the fenders between the nut and the fender that hold the eyebrows on. I will buy an eyebrow if need be to get the nuts and spacers please let me know
Thanks
Posted via Mobile Device

HeavyMetalChevy · 02-25-2012, 01:16 AM

Quote:

Originally Posted by MARIOS68PANEL

How much to include the driver side eyebrow?

I will throw it in

Quote:

Originally Posted by MARIOS68PANEL

if dings and scratches are minor let me know.

Will do! I am pretty sure it is ding free. Let you know

Quote:

Originally Posted by 1971short4X4

I need a couple of the triangle spacers inside the fenders between the nut and the fender that hold the eyebrows on. I will buy an eyebrow if need be to get the nuts and spacers please let me know
Thanks
Posted via Mobile Device

If I find them in tact they are yours just pay ship.

shawno72 · 02-25-2012, 02:07 AM

Man I wish I woulda knew you had this. I need a good hood and d/s eyebrow trim.
Posted via Mobile Device

HeavyMetalChevy · 02-25-2012, 01:59 PM

Quote:

Originally Posted by shawno72

Man I wish I woulda knew you had this. I need a good hood and d/s eyebrow trim.
Posted via Mobile Device

I had purchased it a while back. Just was not sure when I could get to it.
NOTE: just because it is not posted here does not mean I do not have it or will not find it!

HeavyMetalChevy · 02-25-2012, 02:04 PM

Quote:

Originally Posted by MARIOS68PANEL

if dings and scratches are minor let me know.

Daylight hoop pics. Two VERY minor dings. Like pinhole size

HeavyMetalChevy · 02-25-2012, 02:07 PM

daylight emblem pics much better

shawno72 · 02-25-2012, 02:14 PM

If you have another d/s eyebrow let me know, hood trim as well.

MARIOS68PANEL · 02-25-2012, 02:15 PM

Quote:

Originally Posted by HeavyMetalChevy

I will throw it in

Will do! I am pretty sure it is ding free. Let you know

If I find them in tact they are yours just pay ship.

Please sent Paypal info i will cover the paypal costs for the grill hoops and eye brow.

MARIOS68PANEL · 02-25-2012, 03:54 PM

payPal sent on grill hoops and eye brow.
+ PP fee`s

HeavyMetalChevy · 02-25-2012, 04:37 PM

Both NICE Grille Hoops sold to MARIOS68PANEL thanks.

HeavyMetalChevy · 02-26-2012, 12:30 AM

ttt

Delta9 · 02-26-2012, 12:42 AM

Thanks for gettin this for me, i couldnt ask for better people

Delta9 · 02-26-2012, 12:43 AM

you guys should buy this stuff from HMC, help a great guy out
Ken

shawno72 · 02-26-2012, 01:31 AM

Hey Duane is the hood trim piece $20 shipped? Are any of the studs broken off the back and can you get a close up of the dings? Thank you just looking for a good driver piece ya know.
Posted via Mobile Device

shawno72 · 02-26-2012, 06:01 PM

Quote:

Originally Posted by shawno72

Hey Duane is the hood trim piece $20 shipped? Are any of the studs broken off the back and can you get a close up of the dings? Thank you just looking for a good driver piece ya know.
Posted via Mobile Device

Hello?
Posted via Mobile Device

HeavyMetalChevy · 02-26-2012, 06:06 PM

I will be back with pics. I am really swamped with parts today... $20.01 shipped parcel... $28 shipped UPS because it is $8.00 extra handling fee for exceeding 70"

shawno72 · 02-26-2012, 06:12 PM

Quote:

Originally Posted by HeavyMetalChevy

I will be back with pics. I am really swamped with parts today... $20.01 shipped parcel... $28 shipped UPS because it is $8.00 extra handling fee for exceeding 70"

I will take it pending pics. I see you have a ton of new parts up at great deals as always. Thanks Duane. Also make sure that there are no broken studs. When I removed mine every one of the studs broke

Posted via Mobile Device

HeavyMetalChevy · 02-26-2012, 06:36 PM

Quote:

Originally Posted by shawno72

I will take it pending pics. I see you have a ton of new parts up at great deals as always. Thanks Duane. Also make sure that there are no broken studs. When I removed mine every one of the studs broke

Posted via Mobile Device

Better shape than I thought actually

02-25-2012, 12:54 AM	#1
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	67-68 front clip trim/emblems This entire clip is sold and Grille emblem. Up for grabs: OBO on all Both fender emblems- $26.78 shipped- Both NICE Grille Hoops- $90/pr $50/pc. sold to MARIOS68PANEL thanks. Front Hood Molding-$20 dinged up on pass. side NICE "CHEVROLET"- $46.35 set shipped Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog Last edited by HeavyMetalChevy; 03-19-2012 at 12:11 AM. Reason: price update

02-25-2012, 01:00 AM	#2
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: 67-68 front clip trim/emblems ummmhmmm Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

02-25-2012, 01:01 AM	#3
MARIOS68PANEL Active Member Join Date: Mar 2005 Location: North Highlands. California Posts: 449	Re: 67-68 front clip trim/emblems If the grill hoops have no dings I will take them. 90.00 shipped to 95660? __________________ 67 short step 71 Custom

02-25-2012, 01:01 AM	#4
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: 67-68 front clip trim/emblems angles son!!! Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

02-25-2012, 01:04 AM	#6
MARIOS68PANEL Active Member Join Date: Mar 2005 Location: North Highlands. California Posts: 449	Re: 67-68 front clip trim/emblems How much to include the driver side eyebrow? __________________ 67 short step 71 Custom

02-25-2012, 01:06 AM	#7
MARIOS68PANEL Active Member Join Date: Mar 2005 Location: North Highlands. California Posts: 449	Re: 67-68 front clip trim/emblems if dings and scratches are minor let me know. __________________ 67 short step 71 Custom

02-25-2012, 01:08 AM	#8
1971short4X4 Registered User Join Date: Nov 2001 Location: Mission Viejo, Ca Posts: 377	Re: 67-68 front clip trim/emblems I need a couple of the triangle spacers inside the fenders between the nut and the fender that hold the eyebrows on. I will buy an eyebrow if need be to get the nuts and spacers please let me know Thanks Posted via Mobile Device

02-25-2012, 02:07 AM	#10
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: 67-68 front clip trim/emblems Man I wish I woulda knew you had this. I need a good hood and d/s eyebrow trim. Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

02-25-2012, 02:07 PM	#13
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: 67-68 front clip trim/emblems daylight emblem pics much better Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

02-25-2012, 02:14 PM	#14
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: 67-68 front clip trim/emblems If you have another d/s eyebrow let me know, hood trim as well. __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

02-25-2012, 03:54 PM	#16
MARIOS68PANEL Active Member Join Date: Mar 2005 Location: North Highlands. California Posts: 449	Re: 67-68 front clip trim/emblems payPal sent on grill hoops and eye brow. + PP fee`s __________________ 67 short step 71 Custom

02-25-2012, 04:37 PM	#17
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: 67-68 front clip trim/emblems Both NICE Grille Hoops sold to MARIOS68PANEL thanks. __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

02-26-2012, 12:30 AM	#18
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: 67-68 front clip trim/emblems ttt __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

02-26-2012, 12:42 AM	#19
Delta9 Registered User Join Date: Oct 2011 Location: Fort Campbell Posts: 116	Re: 67-68 front clip trim/emblems Thanks for gettin this for me, i couldnt ask for better people

02-26-2012, 12:43 AM	#20
Delta9 Registered User Join Date: Oct 2011 Location: Fort Campbell Posts: 116	Re: 67-68 front clip trim/emblems you guys should buy this stuff from HMC, help a great guy out Ken



Register or Log In To remove these advertisements.

02-26-2012, 01:31 AM	#21
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: 67-68 front clip trim/emblems Hey Duane is the hood trim piece $20 shipped? Are any of the studs broken off the back and can you get a close up of the dings? Thank you just looking for a good driver piece ya know. Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

02-26-2012, 06:06 PM	#23
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: 67-68 front clip trim/emblems I will be back with pics. I am really swamped with parts today... $20.01 shipped parcel... $28 shipped UPS because it is $8.00 extra handling fee for exceeding 70" __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

Register or Log In To remove these advertisements.