1970 C20 bench seat question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Pina · 06-01-2019, 01:47 PM

I have a 70 C 20. The stock bench has seen better days, bad foam and broken springs.

I found a bench seat from a 75 C10. Will this work for my truck? Are there any modifications that will need to be done to make it fit?

kingsolver72 · 06-01-2019, 10:04 PM

I’m thinking that it won’t bolt up correctly. You can always measure the seat frames to verify.

Astro-Balls · 06-02-2019, 12:05 AM

Get a New foam Kit and Seat Upholstery it will be good as new.

**leddzepp** · 06-02-2019, 11:34 AM

It won’t bolt right up. Seat frames and mounting tracks are different. I’m sure you could “make it work” by drilling new holes and/or modifying mounts. Most any older seat you find will have busted springs on the sides which cause you to lean outwards and be uncomfortable. Repair the one you have is what I’d do.

Pina · 06-03-2019, 09:54 AM

Quote:

Originally Posted by leddzepp

It won’t bolt right up. Seat frames and mounting tracks are different. I’m sure you could “make it work” by drilling new holes and/or modifying mounts. Most any older seat you find will have busted springs on the sides which cause you to lean outwards and be uncomfortable. Repair the one you have is what I’d do.

Thanks for the advice. Any idea on where to source springs?

Astro-Balls · 06-03-2019, 10:13 PM

A local Auto Upholstery shop can fix your springs for you.

06-01-2019, 01:47 PM	#1
Pina Registered User Join Date: Nov 2018 Location: Petaluma, CA Posts: 5	1970 C20 bench seat question I have a 70 C 20. The stock bench has seen better days, bad foam and broken springs. I found a bench seat from a 75 C10. Will this work for my truck? Are there any modifications that will need to be done to make it fit?

06-01-2019, 10:04 PM	#2
kingsolver72 10/30/19 Join Date: Aug 2004 Location: ottawa kansas Posts: 5,244	Re: 1970 C20 bench seat question I’m thinking that it won’t bolt up correctly. You can always measure the seat frames to verify.

06-02-2019, 12:05 AM	#3
Astro-Balls Registered User Join Date: Feb 2019 Location: Nor Cal Posts: 822	Re: 1970 C20 bench seat question Get a New foam Kit and Seat Upholstery it will be good as new. __________________ 1968 C20 Fleetside 396 4sp PS PB AC CST . https://www.youtube.com/watch?v=RWK8GgWD4uA

06-02-2019, 11:34 AM	#4
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,019	Re: 1970 C20 bench seat question It won’t bolt right up. Seat frames and mounting tracks are different. I’m sure you could “make it work” by drilling new holes and/or modifying mounts. Most any older seat you find will have busted springs on the sides which cause you to lean outwards and be uncomfortable. Repair the one you have is what I’d do. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

06-03-2019, 10:13 PM	#6
Astro-Balls Registered User Join Date: Feb 2019 Location: Nor Cal Posts: 822	Re: 1970 C20 bench seat question A local Auto Upholstery shop can fix your springs for you. __________________ 1968 C20 Fleetside 396 4sp PS PB AC CST . https://www.youtube.com/watch?v=RWK8GgWD4uA



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.