Best place to get 12v power to hei on a 68 327? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

northern 85 · 11-12-2013, 10:37 PM

How did you guys do it?

panhandler62 · 11-13-2013, 09:04 AM

I'm tapped off the "ign"

1moretime · 11-13-2013, 09:52 AM

I removed the cloth covered resistance wire running from the outside fuse box to the old points distributor and replaced with regular wire. This was on a 68.
There is a nice write up on here about converting to hei and it shows you exactly how to do it, all the way down to popping the terminal connector out of the fuse box. Looks stock when done.

1moretime · 11-13-2013, 09:58 AM

Here's the thread . Its for a six cylinder but it shouldn't be any different with a 327.

http://67-72chevytrucks.com/vboard/s...d.php?t=148346

Wrenchbender Ret · 11-13-2013, 05:45 PM

I find the pink wire on back of the ign. switch. I scrap some insulation off of it & solder a 12 gauge wire to it. Run it through the fire wall & hook the connector to it for the HEI unit.

northern 85 · 11-14-2013, 06:20 AM

Thanks guys!

11-12-2013, 10:37 PM	#1
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Best place to get 12v power to hei on a 68 327? How did you guys do it?

11-13-2013, 09:04 AM	#2
panhandler62 Java Mechanic Join Date: Jun 2005 Location: Martinsburg, WV Posts: 6,764	Re: Best place to get 12v power to hei on a 68 327? I'm tapped off the "ign" __________________ Keith 11 Lincoln MKT -- Momma's wagon 13 G37xS -- middle age crazy car 68 C20 Fleetside -- RIP Decorating the whole town up at a cost of $27 ....

11-13-2013, 09:52 AM	#3
1moretime Registered User Join Date: Feb 2012 Location: Edinburgh, Indiana Posts: 113	Re: Best place to get 12v power to hei on a 68 327? I removed the cloth covered resistance wire running from the outside fuse box to the old points distributor and replaced with regular wire. This was on a 68. There is a nice write up on here about converting to hei and it shows you exactly how to do it, all the way down to popping the terminal connector out of the fuse box. Looks stock when done. __________________ 68 Chevy Short Stepside 250, 3 on tree

11-13-2013, 09:58 AM	#4
1moretime Registered User Join Date: Feb 2012 Location: Edinburgh, Indiana Posts: 113	Re: Best place to get 12v power to hei on a 68 327? Here's the thread . Its for a six cylinder but it shouldn't be any different with a 327. http://67-72chevytrucks.com/vboard/s...d.php?t=148346 __________________ 68 Chevy Short Stepside 250, 3 on tree

11-13-2013, 05:45 PM	#5
Wrenchbender Ret Registered User Join Date: Oct 2005 Location: Overland Park, Ks. Posts: 5,207	Re: Best place to get 12v power to hei on a 68 327? I find the pink wire on back of the ign. switch. I scrap some insulation off of it & solder a 12 gauge wire to it. Run it through the fire wall & hook the connector to it for the HEI unit.

11-14-2013, 06:20 AM	#6
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: Best place to get 12v power to hei on a 68 327? Thanks guys!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.