k5 66 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jonzcustomshop · 03-21-2008, 02:36 PM

Joey~ap is going to do a 456 k5 conversion.
I pm'ed him and let him know that I had seen one like that in a wrecking yard.

I stumbled on it when I was looking for a good bedside, this one was already off, I picked it up, and then noticed the welds on the inside, I looked at it again, and then held it up next to the short fleet next to it... and haaay this thing was REAL short!!
I commented about it to kelly, and he said a guy spent an afternoon pulling the bedside off, before he realized that it was a "shortened" fleet...

Anyway, cool idea Joey~ap, I hope you get farther than these guys did (btw- you can't really tell but this is sitting on a 75 k5 4wd chassis)
also a drawing and a photoshop to fuel the fire!

*LILRED66* · 03-21-2008, 05:24 PM

Too cool...thanks for sharing. That thing on a 4x4 running gear would be quite a combination and very unique.

Frizzle Fry · 03-21-2008, 08:01 PM

I like this one. Fleet bed would be cool too.

Frizzle Fry · 03-21-2008, 08:17 PM

Here's a photochop for ya:

Joey~AP · 03-25-2008, 04:27 PM

Thanks!

We are gettin there!

Spent Spring Break workin on it. Got the cab positioned on the K5 frame. I think I am going to take the brackets off the 66 frame and bolt/weld them on to the new frame. May line up easier.

I will get pix up as soon as I can.

Joey~AP · 03-25-2008, 07:44 PM

Here is a pic of a conversion that I found.

Name: 456short big.jpg
Views: 6572
Size: 39.7 KB

Frizzle Fry · 03-26-2008, 08:44 AM

I like it!

Bishops Trucks · 03-26-2008, 09:35 AM

Nice looking trucks, a K5 in that body style would be sharp.

*1974k5blazer* · 03-26-2008, 10:09 AM

see I dont understand the point of chopping a truck to fit it on a k5 frame? is it the wheel base they are after??? I think to make it look right you would need to some how chop a burban down! I have brought this topic up before and some people responded with some really nice photoshop burbans, second thing is will the top be removable? and if so, full vert or 3/4?? I'm anxious to see this play out, if i had the place and the tools I would be all over it!

Joey~AP · 03-26-2008, 04:05 PM

Quote:

Originally Posted by 1974k5blazer

see I dont understand the point of chopping a truck to fit it on a k5 frame? is it the wheel base they are after??? I think to make it look right you would need to some how chop a burban down! I have brought this topic up before and some people responded with some really nice photoshop burbans, second thing is will the top be removable? and if so, full vert or 3/4?? I'm anxious to see this play out, if i had the place and the tools I would be all over it!

Im doing it to get 4x4, disc brakes, power steering, tilt and all that stuff.

All the components were too far gone on my truck to save. Its going to actually be cheaper for me to do it this way.

I would have rather chopped down a 4x4 burb, but dont have the facilities.

*1974k5blazer* · 03-27-2008, 01:34 AM

so instead of cutting your bed sides, why not stretch the frame 4 inches??? i believe thats the diff between a blazer frame and a shortbed truck frame!

Dinos63 · 03-27-2008, 04:55 AM

these trucks are cool, i like the idea to stretch the frame also for the 4x4 than shorten the truck, but they are bad a$$ looking i love the 2 wheel shorten sub

*1974k5blazer* · 03-27-2008, 04:58 AM

dino wanted to say your trucks make my hair stand up, i hope to see you around mesa when i get back there after i get out of the Marine Corp in 5 days , I will be moving to boulder canyon, on ellsworth and mcdowell! know where it is?

Frizzle Fry · 03-27-2008, 06:12 AM

Quote:

Originally Posted by 1974k5blazer

so instead of cutting your bed sides, why not stretch the frame 4 inches??? i believe thats the diff between a blazer frame and a shortbed truck frame!

Blazer + 11" = Shortbed wheelbase

*1974k5blazer* · 03-27-2008, 06:29 AM

good info!

Joey~AP · 03-27-2008, 04:38 PM

I thought a K5 was 106.5" and a SWB was 115"?

8.5" difference.

Joey~AP · 03-27-2008, 07:18 PM

Name: DSCF4484.JPG
Views: 6139
Size: 102.4 KB

Name: DSCF4491.JPG
Views: 6204
Size: 105.8 KB

Name: DSCF4503.JPG
Views: 6144
Size: 90.9 KB

Name: DSCF4508.JPG
Views: 6124
Size: 92.6 KB

Frizzle Fry · 03-28-2008, 02:12 AM

69-72 Blazer=104"

kdrodworks316 · 03-28-2008, 05:02 AM

hey Jon, is that at your buddys yard in arlee? I need that in my yard. pm me

jonzcustomshop · 03-28-2008, 05:50 AM

Are you guys going to shorten a fleet bed for this?
If so I think it would look better with a shortened long fleet bed (like the truck in the first pic)
I think the larger wheelwells would look better with the bigger 4wd tires.

Joey~AP · 03-28-2008, 04:13 PM

Short.

Dinos63 · 03-31-2008, 04:41 AM

Quote:

Originally Posted by 1974k5blazer

dino wanted to say your trucks make my hair stand up, i hope to see you around mesa when i get back there after i get out of the Marine Corp in 5 days , I will be moving to boulder canyon, on ellsworth and mcdowell! know where it is?

yeah i do , my work is in mesa, broadway and mesa dr , let me know when you in

*1974k5blazer* · 03-31-2008, 05:43 AM

roger!! will do!

JohnnyG. · 04-01-2008, 07:28 AM

Quote:

Originally Posted by jonzcustomshop

Are you guys going to shorten a fleet bed for this?
If so I think it would look better with a shortened long fleet bed (like the truck in the first pic)
I think the larger wheelwells would look better with the bigger 4wd tires.

are the wheel well openings actually bigger on a fleetside longbed than on a shortbed?

jonzcustomshop · 04-01-2008, 03:56 PM

yes they are about 3 inches longer, you can kindof tell, if you look at the very first pic, and then the yellow sub, or the red 4wd.

Here is a short fleet, and then a "shortened" fleet.
I actually like the shortened box better.

03-21-2008, 02:36 PM	#1
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	k5 66 Joey~ap is going to do a 456 k5 conversion. I pm'ed him and let him know that I had seen one like that in a wrecking yard. I stumbled on it when I was looking for a good bedside, this one was already off, I picked it up, and then noticed the welds on the inside, I looked at it again, and then held it up next to the short fleet next to it... and haaay this thing was REAL short!! I commented about it to kelly, and he said a guy spent an afternoon pulling the bedside off, before he realized that it was a "shortened" fleet... Anyway, cool idea Joey~ap, I hope you get farther than these guys did (btw- you can't really tell but this is sitting on a 75 k5 4wd chassis) also a drawing and a photoshop to fuel the fire! Attached Images

03-21-2008, 05:24 PM	#2
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: k5 66 Too cool...thanks for sharing. That thing on a 4x4 running gear would be quite a combination and very unique.

03-21-2008, 08:01 PM	#3
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: k5 66 I like this one. Fleet bed would be cool too. Attached Images

03-21-2008, 08:17 PM	#4
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: k5 66 Here's a photochop for ya: Attached Images

03-25-2008, 04:27 PM	#5
Joey~AP TexasBowhunter Join Date: Mar 2008 Location: alvin, texas Posts: 450	Re: k5 66 Thanks! We are gettin there! Spent Spring Break workin on it. Got the cab positioned on the K5 frame. I think I am going to take the brackets off the 66 frame and bolt/weld them on to the new frame. May line up easier. I will get pix up as soon as I can.

03-25-2008, 07:44 PM	#6
Joey~AP TexasBowhunter Join Date: Mar 2008 Location: alvin, texas Posts: 450	Re: k5 66 Here is a pic of a conversion that I found. Last edited by Joey~AP; 03-25-2008 at 07:45 PM.

03-26-2008, 08:44 AM	#7
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: k5 66 I like it!

03-26-2008, 09:35 AM	#8
Bishops Trucks KEEP ON TRUCKIN' Join Date: Jun 2005 Location: Sterling, Va. Posts: 5,731	Re: k5 66 Nice looking trucks, a K5 in that body style would be sharp. __________________ JIM '97 GMC Sierra K1500 '95 Chevy Silverado C1500 '71 Cheyenne Z71 / LT1 & 4-Speed SWB K/10 Father/Son Project http://www.youtube.com/watch?v=4l689JKXPnA http://67-72chevytrucks.com/vboard/payments.php "LIVIN' FREE FOREVER"

03-26-2008, 10:09 AM	#9
1974k5blazer Account Suspended Join Date: Dec 2007 Location: Queen Creek AZ Posts: 243	Re: k5 66 see I dont understand the point of chopping a truck to fit it on a k5 frame? is it the wheel base they are after??? I think to make it look right you would need to some how chop a burban down! I have brought this topic up before and some people responded with some really nice photoshop burbans, second thing is will the top be removable? and if so, full vert or 3/4?? I'm anxious to see this play out, if i had the place and the tools I would be all over it!

03-27-2008, 01:34 AM	#11
1974k5blazer Account Suspended Join Date: Dec 2007 Location: Queen Creek AZ Posts: 243	Re: k5 66 so instead of cutting your bed sides, why not stretch the frame 4 inches??? i believe thats the diff between a blazer frame and a shortbed truck frame!

03-27-2008, 04:55 AM	#12
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: k5 66 these trucks are cool, i like the idea to stretch the frame also for the 4x4 than shorten the truck, but they are bad a$$ looking i love the 2 wheel shorten sub __________________ CHEVY ONLY... Nothin Else ! Last edited by Dinos63; 03-27-2008 at 04:58 AM.

03-27-2008, 04:58 AM	#13
1974k5blazer Account Suspended Join Date: Dec 2007 Location: Queen Creek AZ Posts: 243	Re: k5 66 dino wanted to say your trucks make my hair stand up, i hope to see you around mesa when i get back there after i get out of the Marine Corp in 5 days , I will be moving to boulder canyon, on ellsworth and mcdowell! know where it is?

03-27-2008, 06:29 AM	#15
1974k5blazer Account Suspended Join Date: Dec 2007 Location: Queen Creek AZ Posts: 243	Re: k5 66 good info!

03-27-2008, 04:38 PM	#16
Joey~AP TexasBowhunter Join Date: Mar 2008 Location: alvin, texas Posts: 450	Re: k5 66 I thought a K5 was 106.5" and a SWB was 115"? 8.5" difference.

03-27-2008, 07:18 PM	#17
Joey~AP TexasBowhunter Join Date: Mar 2008 Location: alvin, texas Posts: 450	Re: k5 66



Register or Log In To remove these advertisements.

03-28-2008, 02:12 AM	#18
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: k5 66 69-72 Blazer=104"

03-28-2008, 05:02 AM	#19
kdrodworks316 KOFFIN DRAGGER Join Date: Jan 2008 Location: st.anthony Idaho Posts: 864	Re: k5 66 hey Jon, is that at your buddys yard in arlee? I need that in my yard. pm me

03-28-2008, 05:50 AM	#20
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: k5 66 Are you guys going to shorten a fleet bed for this? If so I think it would look better with a shortened long fleet bed (like the truck in the first pic) I think the larger wheelwells would look better with the bigger 4wd tires.

03-28-2008, 04:13 PM	#21
Joey~AP TexasBowhunter Join Date: Mar 2008 Location: alvin, texas Posts: 450	Re: k5 66 Short.

03-31-2008, 05:43 AM	#23
1974k5blazer Account Suspended Join Date: Dec 2007 Location: Queen Creek AZ Posts: 243	Re: k5 66 roger!! will do!

04-01-2008, 03:56 PM	#25
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: k5 66 yes they are about 3 inches longer, you can kindof tell, if you look at the very first pic, and then the yellow sub, or the red 4wd. Here is a short fleet, and then a "shortened" fleet. I actually like the shortened box better. Attached Images Last edited by jonzcustomshop; 04-01-2008 at 04:02 PM. Reason: added pics

Register or Log In To remove these advertisements.