70 Chevy C20 in El Dorado, CA. Screaming deal!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*FormerMember* · 01-16-2005, 10:39 AM

1970 Chevy C20. 1972 front C30 suspension and 1 ton disk brakes up front, Eaton 14B rear with 4.10's. Fresh 454 with billet aluminum belt drive, aluminum radiator, new flex fan, billet brackets, new edelbrock carb, new 120 amp alt and more crap you can poke a stick at. All new tie rod ends, ball joints, wheel bearings, master cyl and booster, springs, shocks. Fresh Th400 and TC with a B+M stage 2 shift kit, new driveline and a ton more. I also have a new carpet, bumpers, dash pad,inner door panels and more crap. 16" aluminum rims and 33" tires.
3500.00. This thing runs like a top and will probably tow your house... I'll want the stereo out of it. I have a boat load of cash in it. Needs paint, some surface rust sanded off (no structural rot, that I know of) and one dent in the rear quarter kicked out.

Located in El Dorado, CA. I am in Boston, MA. I don't want to ship out a 2wd truck, no matter how hot roddish it is.

I also have a billet aluminum gauge panel with all auto meter guages that can go with it, for very little extra.
__________________

avejoe · 01-16-2005, 12:56 PM

PM sent

*FormerMember* · 01-16-2005, 12:58 PM

Also, I have brand new metal interior door panels, new carpet, new dash pad, new sun visors...

*FormerMember* · 01-16-2005, 01:01 PM

The above parts aren't installed.

The truck is currently running Doug Thorley headers into dual 2.5" exhaust with 70 series flow masters.

Also, I have a new plastic grill insert for it.

New chrome door guards.

I think I have about 9K into this truck, the more I think about it, the more I don't want to sell

bad_turbo · 01-16-2005, 01:26 PM

don't sell it...just ship it out. Probably wouldn't cost more than $800 since it runs.

*FormerMember* · 01-16-2005, 01:38 PM

Quote:

Originally Posted by bad_turbo

don't sell it...just ship it out. Probably wouldn't cost more than $800 since it runs.

Well, I really don't want to sell, but out here I'd need 4wd. It runs like a screaming eagle.

Also, I won't have much time to drive it, as I am working a wee bit more than I used to. So there's a 4wd Cummins in my future. I will still have my 70 Blazer.

bad_turbo · 01-16-2005, 01:48 PM

Darn!! Why couldn't you have left your blazer here?!

*FormerMember* · 01-16-2005, 02:05 PM

Quote:

Originally Posted by bad_turbo

Darn!! Why couldn't you have left your blazer here?!

It's still there, but I plan to drive it out when the weather is nicer.

70 Blazer, HP60 front, Corp 14 bolt rear and dual T-cases (one's a Furd) on 39.5" tires...

OneBad4x4 · 01-16-2005, 03:12 PM

definetly a nice truck, i can vouch for it

*FormerMember* · 01-16-2005, 04:08 PM

Also, I have a rear mount gas tank, straps, fuel filler neck from a 86 Suburban to go with it. Also have a hummer 2 billet fuel door.

Bartcore · 01-16-2005, 04:20 PM

Ya... I remembered my password

*FormerMember* · 01-16-2005, 04:36 PM

Also, forgot about the deep TCI tranny pan and Lokar Th400 kick down

*FormerMember* · 01-16-2005, 04:45 PM

Pics:

*FormerMember* · 01-16-2005, 04:49 PM

More

*FormerMember* · 01-16-2005, 04:53 PM

More pics.

*FormerMember* · 01-16-2005, 04:58 PM

Boxes of schtuff and the interior.

I stripped out the interior to paint. Never got to it.

ljbear · 01-16-2005, 05:04 PM

Quote:

Originally Posted by grendel

Fresh 454 with billet aluminum belt drive, aluminum radiator, new flex fan, billet brackets, new edelbrock carb, new 120 amp alt and more crap you can poke a stick at.

What's been done to the motor, how much time/miles are on it. Any other statistics on it?

*FormerMember* · 01-16-2005, 05:06 PM

Steering column is a bit messed up with the shifter needing work, but it's fine for now.

Got a new billet steering wheel and adapter to go with it.

Stereo does NOT go with.

*FormerMember* · 01-16-2005, 05:08 PM

Quote:

Originally Posted by ljbear

What's been done to the motor, how much time/miles are on it. Any other statistics on it?

It's a 4 bolt main with a Comp Cams RV cam. Rebuilt with all top shelf parts. Other than that, it's stock beyond the intake, mild cam, carb, fuel pump and headers.

it's got about 500 miles and 10 hours into break in.

OneBad4x4 · 01-16-2005, 05:13 PM

damn, that engine looks familiar

you already put 500 miles on it! that was fast

*FormerMember* · 01-16-2005, 05:14 PM

Also, installed a relay harness to get rid of the current running through the head light switch.

Also has a Accel in cap Hi-PO coil in the cap.

*FormerMember* · 01-16-2005, 05:15 PM

Quote:

Originally Posted by OneBad4x4

damn, that engine looks familiar

you already put 500 miles on it! that was fast

Yeah, it's been a fun item to drive.

Motor is still breaking in though. Never hammered it.

*FormerMember* · 01-16-2005, 05:16 PM

New power steering box, pump and lines...

*FormerMember* · 01-16-2005, 05:24 PM

Optional gauge cluster: 500.00

I prefer to sell this with the truck, as the sending units are in and work well.

The sending unit for the electric speedo is 65.00 by itself.

ljbear · 01-16-2005, 05:29 PM

Interested in selling motor and dash? I'll pull

01-16-2005, 10:39 AM	#1
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	70 Chevy C20 in El Dorado, CA. Screaming deal!!! 1970 Chevy C20. 1972 front C30 suspension and 1 ton disk brakes up front, Eaton 14B rear with 4.10's. Fresh 454 with billet aluminum belt drive, aluminum radiator, new flex fan, billet brackets, new edelbrock carb, new 120 amp alt and more crap you can poke a stick at. All new tie rod ends, ball joints, wheel bearings, master cyl and booster, springs, shocks. Fresh Th400 and TC with a B+M stage 2 shift kit, new driveline and a ton more. I also have a new carpet, bumpers, dash pad,inner door panels and more crap. 16" aluminum rims and 33" tires. 3500.00. This thing runs like a top and will probably tow your house... I'll want the stereo out of it. I have a boat load of cash in it. Needs paint, some surface rust sanded off (no structural rot, that I know of) and one dent in the rear quarter kicked out. Located in El Dorado, CA. I am in Boston, MA. I don't want to ship out a 2wd truck, no matter how hot roddish it is. I also have a billet aluminum gauge panel with all auto meter guages that can go with it, for very little extra. __________________

01-16-2005, 12:56 PM	#2
avejoe Custer had a plan too. Join Date: Dec 2003 Location: No. California Posts: 344	PM sent __________________ 72 K15 GMC (aka Big White) Performance Rockers, Cab Corners, and Floors Fossil Fuel Glutton Neighborhood Nuisance 98 BMW 540i for Speed (Sold ) 05 Subaru Outback for mileage

01-16-2005, 12:58 PM	#3
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Also, I have brand new metal interior door panels, new carpet, new dash pad, new sun visors... Last edited by FormerMember; 01-22-2005 at 07:24 PM.

01-16-2005, 01:01 PM	#4
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	The above parts aren't installed. The truck is currently running Doug Thorley headers into dual 2.5" exhaust with 70 series flow masters. Also, I have a new plastic grill insert for it. New chrome door guards. I think I have about 9K into this truck, the more I think about it, the more I don't want to sell Last edited by FormerMember; 01-16-2005 at 01:08 PM.

01-16-2005, 01:26 PM	#5
bad_turbo turbo enthusiast Join Date: Jan 2004 Location: carmichael, ca. Posts: 1,826	don't sell it...just ship it out. Probably wouldn't cost more than $800 since it runs. __________________ "But daddy, I didn't hit them all with a stick"...what my 6 year old tells me when I pick him up from school early for fighting "

01-16-2005, 01:48 PM	#7
bad_turbo turbo enthusiast Join Date: Jan 2004 Location: carmichael, ca. Posts: 1,826	Darn!! Why couldn't you have left your blazer here?! __________________ "But daddy, I didn't hit them all with a stick"...what my 6 year old tells me when I pick him up from school early for fighting "

01-16-2005, 03:12 PM	#9
OneBad4x4 Lifted70BowTie Join Date: Jul 2004 Location: Bakersfield, CA Posts: 204	definetly a nice truck, i can vouch for it __________________ I live in Bakersfield, CA 93308, I use USPS for shipping. (Even tho I've never shipped anything and am currently banned for failure to send out parts.) Please reply to my for sale threads by PMing me. Its hard to keep track of all the threads.

01-16-2005, 04:08 PM	#10
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Also, I have a rear mount gas tank, straps, fuel filler neck from a 86 Suburban to go with it. Also have a hummer 2 billet fuel door.

01-16-2005, 04:20 PM	#11
Bartcore Registered User Join Date: Dec 2003 Location: Bennett Valley Ca. Posts: 205	Ya... I remembered my password __________________ 1970 1 ton K5 on 38.5's

01-16-2005, 04:36 PM	#12
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Also, forgot about the deep TCI tranny pan and Lokar Th400 kick down

01-16-2005, 04:45 PM	#13
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Pics: Last edited by FormerMember; 10-04-2007 at 06:33 PM.

01-16-2005, 04:49 PM	#14
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	More Last edited by FormerMember; 10-04-2007 at 06:33 PM.

01-16-2005, 04:53 PM	#15
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	More pics. Last edited by FormerMember; 10-04-2007 at 06:33 PM.

01-16-2005, 04:58 PM	#16
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Boxes of schtuff and the interior. I stripped out the interior to paint. Never got to it. Last edited by FormerMember; 10-04-2007 at 06:33 PM.

01-16-2005, 05:06 PM	#18
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Steering column is a bit messed up with the shifter needing work, but it's fine for now. Got a new billet steering wheel and adapter to go with it. Stereo does NOT go with.



Register or Log In To remove these advertisements.

01-16-2005, 05:13 PM	#20
OneBad4x4 Lifted70BowTie Join Date: Jul 2004 Location: Bakersfield, CA Posts: 204	damn, that engine looks familiar you already put 500 miles on it! that was fast __________________ I live in Bakersfield, CA 93308, I use USPS for shipping. (Even tho I've never shipped anything and am currently banned for failure to send out parts.) Please reply to my for sale threads by PMing me. Its hard to keep track of all the threads.

01-16-2005, 05:14 PM	#21
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Also, installed a relay harness to get rid of the current running through the head light switch. Also has a Accel in cap Hi-PO coil in the cap.

01-16-2005, 05:16 PM	#23
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	New power steering box, pump and lines...

01-16-2005, 05:24 PM	#24
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Optional gauge cluster: 500.00 I prefer to sell this with the truck, as the sending units are in and work well. The sending unit for the electric speedo is 65.00 by itself. Last edited by FormerMember; 10-04-2007 at 06:33 PM.

01-16-2005, 05:29 PM	#25
ljbear Registered User Join Date: Jan 2003 Location: Emmett, Idaho Posts: 858	Interested in selling motor and dash? I'll pull __________________ Larry 72 Chevy SWB 4x4 71 Chevy SWB 4x4 My Work Truck "Don't confuse enthusiasm with capability"

Register or Log In To remove these advertisements.