1 Ton Short Beds ?

[Harney Boy]

I have a 1977 Silverado 20. The man I got it from said that the truck was ordered from the factory to be a 1 ton short bed step side Silverado. So the factory cut the frame, shortened it, and put a Stepside Bed on it. It still has the 2 Driveshafts with the Carrier bearing. I paid $400 and an Edelbrock Performer RPM cam for the truck without the 454 Big Block or the TH400 Transmission. I built a 1972 400 SBC 4 bolt main with Edelbrock Performer RPM Aluminum heads, Edelbrock Performer RPM Air Gap intake, Keith Black Flattop pistons, Edelbrock Performer RPM cam, and a Holley AED 750 Double Pumper manual secondary with no choke Carb. But does ANYBODY have any Short bed 3/4 or 1 tons? [IMG][/IMG]
[IMG][/IMG]