Waterproofing tail lights. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1964Chevy · 12-01-2012, 11:26 PM

Howdy all. I have a 64 Chevy short step, I'm replacing my original tail lights with flush mount LED's, I plan on mounting them on a bracket about 12" above the original lights. My prob is that I cannot find how to attach Stainless flex wire covers to the back of my flush mount lights (I am going to build a backing plate to secure the lights to) that will prevent water from getting to the back of the lights.
LMC offers rubber wire boot covers, and they also have the stainless cable covers, but I can't figure how to attach it to the back of the light.
Any help would be appreciated.
This is a great forum, thanks for all the great info.
Jerry

**Captainfab** · 12-02-2012, 01:28 AM

Maybe some shrink tube?

1964Chevy · 12-02-2012, 12:20 PM

Hey CaptainFab, the problem is that the supplied gasket has a hole in the back for the wires to exit that is about 1-1/4", and the wires are connected directly to the circuit board. LMC has a wire boot for a 55 Chevy tail light assembly that I might try. I just wonder if the wires will vibrate from normal driving and break the solder where they connect to the circuit board.

12-01-2012, 11:26 PM	#1
1964Chevy Registered User Join Date: Jan 2012 Location: Denton, Texas Posts: 92	Waterproofing tail lights. Howdy all. I have a 64 Chevy short step, I'm replacing my original tail lights with flush mount LED's, I plan on mounting them on a bracket about 12" above the original lights. My prob is that I cannot find how to attach Stainless flex wire covers to the back of my flush mount lights (I am going to build a backing plate to secure the lights to) that will prevent water from getting to the back of the lights. LMC offers rubber wire boot covers, and they also have the stainless cable covers, but I can't figure how to attach it to the back of the light. Any help would be appreciated. This is a great forum, thanks for all the great info. Jerry

12-02-2012, 01:28 AM	#2
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,250	Re: Waterproofing tail lights. Maybe some shrink tube? __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

12-02-2012, 12:20 PM	#3
1964Chevy Registered User Join Date: Jan 2012 Location: Denton, Texas Posts: 92	Re: Waterproofing tail lights. Hey CaptainFab, the problem is that the supplied gasket has a hole in the back for the wires to exit that is about 1-1/4", and the wires are connected directly to the circuit board. LMC has a wire boot for a 55 Chevy tail light assembly that I might try. I just wonder if the wires will vibrate from normal driving and break the solder where they connect to the circuit board. __________________ If your strength is small, don't carry heavy burdens. If your words are worthless, don't give advice. Chinese Proverb



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.