Can someone please help me?

[jrsmith_2010]

hey guys, i am starting to bag a truck in the very near future and already have all the air ride parts to do it...EXCEPT the fittings, and im kind of lost on them... I have 50' of 1/4 in line and 50' of 1/2 in line, i plan on using the 1/2 for the dumps and 1/4 to fill. but what fittings to i need to do this? like for the bags, for the valves, any help would help me out alot!

[baggedcten]

call SD or AVs and talk to them they will send out all the fitting you need.

Why do you want it dump hard and fill slow its usually they other way around?

[xratt]

yeah? Sounds like you would want the 1/2 inch lines and fittings to fill the bags. Only one line runs to the bag. On the exhaust valve, step it down with a fitting to 1/4 inch. This will slow the air a bit and make it go down a tad softer. Trust me, it hurts when you slam to the ground while driving.