how to remove steering bearing - The 1947 - Present Chevrolet & GMC Truck Message Board Network

doughby82 · 12-18-2003, 07:21 AM

i have the steering wheel off,and i can see the bearing,but the turn signal canceller off,i also remove the 3 screws from it,its seem to be stuck on the right side.i think the harard button is holding it up.also is it a special bearing i have to order or can it be bought at a hardware store.

Rooster's 67 · 12-18-2003, 03:00 PM

pull the hazard switch button, then the signal switcg should pull up, is the bearing bad? you can pick up the bearing from the dealer, and I belive the newer coulum bearings will work in the older coulums. also make sure there is a tapered race for the top of that bearing. if you got a camera post a picture of the parts you have, you may have parts missing if the shaft is loose.

doughby82 · 12-18-2003, 05:08 PM

how does the hazard button come out

JimKshortstep4x4 · 12-19-2003, 09:47 AM

If it is not a tilt wheel the hazard button does not have to come off. Make sure the button is in and then tip the switch and work it out.

Jim

12-18-2003, 07:21 AM	#1
doughby82 Registered User Join Date: Mar 2001 Location: springfield ill Posts: 836	how to remove steering bearing i have the steering wheel off,and i can see the bearing,but the turn signal canceller off,i also remove the 3 screws from it,its seem to be stuck on the right side.i think the harard button is holding it up.also is it a special bearing i have to order or can it be bought at a hardware store. __________________ springfield illinois 2003 custom (harley)built from scratch 68 swb

12-18-2003, 03:00 PM	#2
Rooster's 67 Registered User Join Date: Sep 2003 Location: DFW Posts: 765	pull the hazard switch button, then the signal switcg should pull up, is the bearing bad? you can pick up the bearing from the dealer, and I belive the newer coulum bearings will work in the older coulums. also make sure there is a tapered race for the top of that bearing. if you got a camera post a picture of the parts you have, you may have parts missing if the shaft is loose. __________________ The problem with America is stupidity. I'm not saying there should be a capital punishment for stupidity, but why don't we just take the safety labels off of everything and let the problem solve itself?

12-18-2003, 05:08 PM	#3
doughby82 Registered User Join Date: Mar 2001 Location: springfield ill Posts: 836	how does the hazard button come out __________________ springfield illinois 2003 custom (harley)built from scratch 68 swb

12-19-2003, 09:47 AM	#4
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	If it is not a tilt wheel the hazard button does not have to come off. Make sure the button is in and then tip the switch and work it out. Jim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.