Engine Build

[mwilliams5891]

Ok so this is my first engine build and I have a 327 from a 64 impala I think. It has the lower end done...not completely sure on what crank pistons or anything.
but for the top end i was planning on doing

http://www.summitracing.com/parts/CMB-08-0034/
I don't know what a good cheaper carb i should use so please help with that.

is this going to work for the carb?
http://www.summitracing.com/parts/HLY-0-80555C/

Engine dress up
http://www.summitracing.com/parts/PRO-141-758/

I was thinking this disturber but im not sure about it, as far as advances etc.
http://www.summitracing.com/parts/SUM-850001R/

cheap headers
http://www.summitracing.com/parts/SUM-G9006/

Water pump
http://www.summitracing.com/parts/TFF-1449NA/

Starter
http://www.summitracing.com/parts/TFF-3510A/

Alternator
http://www.summitracing.com/parts/TFF-7935ABULL/

so other than that i dont know the rest yet...so I know I missed alot so ask and please give advice and tell me if these will work and what else I need.

can I use my old fan? do I need to buy pulleys? flexplate? will my old 4 speed mount up (on an inline 6 now)

ok so any questions just ask........im planning on doing this next weekend or just after if anyone is around eugene/albany area of oregon

thank you all in advance