cup holder

[Ricks1971]

Does someone make the ash tray cup holders that went you open the ash tray its part of the ash tray?

[DA71Grande]

It’s fairly easy to make one I used a Toyota 4Runner cup holder and an old ashtray..

https://www.ebay.com/itm/39451511894...mis&media=COPY

[weq92f]

.

I’ve got the ashtray cup holders. Mine are too shallow. The cup only dips down into the holder an inch or inch and a half…this causes the cup to tip easily…way too easily.

Never use them.

-Kevin

[chewychevy67]

Originally Posted by DA71Grande

It’s fairly easy to make one I used a Toyota 4Runner cup holder and an old ashtray..

https://www.ebay.com/itm/39451511894...mis&media=COPY

Any pics of this with a cup in it? Will the cup/can stay sturdy in it on the road? Looks like a good idea if the drinks won't spill

[Richard]

Originally Posted by DA71Grande

It’s fairly easy to make one I used a Toyota 4Runner cup holder and an old ashtray..

https://www.ebay.com/itm/39451511894...mis&media=COPY

Thanks for posting this. Have been looking for a mechanism that will fit the width of the OEM ash tray. 3 others have been purchased that did not fit.
Richard
Edit- Fixed pic for you.

[RichardJ]

I used a toyota cup holder as well.

toyotas have to be good for something.

[kwmech]

Originally Posted by DA71Grande

It’s fairly easy to make one I used a Toyota 4Runner cup holder and an old ashtray..

https://www.ebay.com/itm/39451511894...mis&media=COPY

Have any more details on that?

[LNP]

Originally Posted by kwmech

Have any more details on that?

I am interested as well. What kind of mods did you do to put the two together?
Thanks

[72SB]

On my 72 the P.O. left one of those Plug & Chug types in the truck (https://www.cjponyparts.com/classic-...1924&year=1973), can't believe they cost this much

I just mounted it so the part that would plug into ashtray was centered under front seat just exposing the cup holder part using 2 sheet metal bolts into seat frame.

It was easy to access and out of the way

[Ricks1971]

RichardJ it looks like you used a ford face on this cup holder?

[RichardJ]

The AC controller is from a Lincoln Mark VII, but not the cup holder.

[K10-Kansas]

Originally Posted by Sheepdip

Holley.com/products/interior/dash/parts/ATC6772?hsa_acc=7848552874&hsa_cam=17640499883&hsa_grp=1146791582501129&hsa_ad=&hsa_src=o&hsa_tgt=pl a-4575274056256025&hsa_kw=&hsa_mt=e&hsa_net=adwords&hsa_ver=3&msclk

Beware this will not work with a factory 4 speed floor shifter

I couldn't get link to work and didn't find a pop out cup holder on the Holly site. Did anyone get that link to work?

[LNP]

Originally Posted by K10-Kansas

I couldn't get link to work and didn't find a pop out cup holder on the Holly site. Did anyone get that link to work?

It was a copy & paste type of link here is the direct link.

https://www.holley.com/products/inte.../parts/ATC6772

[K10-Kansas]

Originally Posted by LNP

It was a copy & paste type of link here is the direct link.

https://www.holley.com/products/inte.../parts/ATC6772

Oh thanks. That's why I couldn't find it. I was looking for a fold out/in cup holder.

[Richard]

Originally Posted by kwmech

Have any more details on that?

Originally Posted by LNP

I am interested as well. What kind of mods did you do to put the two together?
Thanks

Hope we hear back from him. The cup holder arrived today. Waiting on an ashtray purchased on the parts board to cannibalize. Will post in my build thread when I do the mod. I will figure something out.

[PowerdbyChevy79]

Originally Posted by DA71Grande

It’s fairly easy to make one I used a Toyota 4Runner cup holder and an old ashtray..

https://www.ebay.com/itm/39451511894...mis&media=COPY

This is a good idea..

[kwmech]

Originally Posted by Richard

Hope we hear back from him. The cup holder arrived today. Waiting on an ashtray purchased on the parts board to cannibalize. Will post in my build thread when I do the mod. I will figure something out.

Looking forward!

[LNP]

Originally Posted by Richard

Hope we hear back from him. The cup holder arrived today. Waiting on an ashtray purchased on the parts board to cannibalize. Will post in my build thread when I do the mod. I will figure something out.

Me too. I have a cup holder on the way. I'm sure I could figure it out but sometimes it helps to have tips from someone thats been there down that so you skip the oops and nope this way wont work. lol I'll watch for your post on it and if I get mine before then I will post up

[kwmech]

Called Toyota this morning on the cup holder, they want 80.00 friggn' dollars for that. Saw one on Amazon for 14.20 from a company called Nova Parts.

[LNP]

Originally Posted by kwmech

Called Toyota this morning on the cup holder, they want 80.00 friggn' dollars for that. Saw one on Amazon for 14.20 from a company called Nova Parts.

I ordered mine from Ebay

[425HP409]

Old Air Products used to carry one like the Toyota one. I have it in my truck and it works great with the original ashtray faceplate on it.

[LNP]

My son is currently making a bracket to adapt the Toyota cup holder so it will attach to the factroy ash tray bracket. I will let you guys know how it goes.

[Jason Banks]

I found Toyota PN 55620 35050

Prices are all over the place but this one on Amazon has good reviews and is cheap..
https://www.amazon.com/APPERFiT-Comp...dp/B09XXCP5CM/

Might try this out and see how it works.

[kwmech]

This must be real secret squirrel stuff as nobody is following up on how this goes together or just plug and play

[LNP]

Originally Posted by kwmech

This must be real secret squirrel stuff as nobody is following up on how this goes together of just plug and play

I decided to take the task on myself as the guy that posted installed his hasnt answered back on how. If the adapter bracket works I will post up about it. The prototype has worked but he is now dialing it in. I will post up picks once done and if someone wants one made a link to it.