You gotta see this picture - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Trsmotrhed · 03-22-2013, 05:20 PM

I bought some floor pans from a guy off craigslist. My brother picked them up for me and this is the pic my brother sent me. The guys been building this truck in his house for 15 years. He also had a crate 427 in his living room.

Posted via Mobile Device

**grumpy** · 03-22-2013, 06:08 PM

Haha. that dude is single....

concretekiller · 03-22-2013, 06:13 PM

'Murica!
Posted via Mobile Device

Rich 5150 69 · 03-22-2013, 07:11 PM

Build your truck while dinning I guess....

Posted via Mobile Device

**Clyde65** · 03-22-2013, 07:35 PM

Hey! That's my living room!

Jk, but I would do it if I had to
Posted via Mobile Device

'63GENIII · 03-22-2013, 07:36 PM

Looks to coming along nicely, LOL. I wondered how he was going to get it out , but then started thinking about how he got it in? Must be a ship in a bottle kinda thing;

YBNORML · 03-22-2013, 07:40 PM

I'm saving this pic! Now every time my wife complains, I'm going to show this one

Posted via Mobile Device

Lugnutz65 · 03-22-2013, 08:38 PM

OK, a little off the subject but, I went to school with a guy and his dad (a doctor of all things) built an AIRPLANE inside his house. They had to remove a wall to get the plane out of the house when it was finished. The story made the local paper and I saw the article. There are some crazy people out there.

61_FL_Apache · 03-22-2013, 08:41 PM

Quote:

Originally Posted by **grumpy**

Haha. that dude is single....

You know it!!

RANDY COX · 03-22-2013, 08:48 PM

Good day hope he's not doing any welding in there,with that carpet floor.And my wife say I'm crazy...He,He...

Trsmotrhed · 03-22-2013, 08:57 PM

I don't think welding would go over to good either in your living room.
Posted via Mobile Device

Slow Build · 03-22-2013, 09:17 PM

There is something about the temperature controlled work area that appeals to me here.

Malibob · 03-22-2013, 09:20 PM

Quote:

Originally Posted by Trsmotrhed

I don't think welding would go over to good either in your living room.
Posted via Mobile Device

Why not, you never heard of SLAG carpet? Ha Ha

**Corts60** · 03-22-2013, 10:03 PM

Quote:

Originally Posted by **grumpy**

Haha. that dude is single....

Haha. And always will be.
Posted via Mobile Device

donthekawguy · 03-22-2013, 10:50 PM

As soon as I kicked the old lady out a couple years ago, I moved a motorcycle into the diningroom. Just for the winter. Now ever winter I pull a bike in to rebuild it. I wish I had room for my truck tho!

**LockDoc** · 03-23-2013, 12:24 AM

Quote:

Originally Posted by Malibob

Why not, you never heard of SLAG carpet? Ha Ha

NO, NO, That's SHAG not SLAG...

LockDoc

KroAutomotiveInc · 03-23-2013, 01:27 AM

my grandfathers favorite spot to work on his old chopper was in the dinning room lol my grandpa and this guy would hit it off in to time lol!

chuckmc8 · 03-23-2013, 05:53 AM

It like the episode of Andy Griffith show when Gomer reassembled that car in the jail house

darkhorse970 · 03-23-2013, 06:06 AM

Its a sickness I tell ya...

I worked for a guy that rebuilt a '49 Harley in his living room...he was divorced before he finished it, but he did finish the build in there.

**rideblue00** · 03-23-2013, 07:56 AM

Wheres the cab........? Thats my new desktop pic! lol

Malibob · 03-23-2013, 09:15 AM

Quote:

Originally Posted by LockDoc

NO, NO, That's SHAG not SLAG...

LockDoc

not after he's done welding.

Jeff La · 03-23-2013, 12:29 PM

Quote:

Originally Posted by Slow Build

There is something about the temperature controlled work area that appeals to me here.

Trsmotrhed · 03-23-2013, 01:10 PM

Quote:

Originally Posted by Jeff La

It does look warm and cozy in there.

kinda wishing mine was inside right now as cold as it is. Maybe he's onto something here. I see today he posted a gas tank. Makes me want to go buy it so I can check it out myself.
Posted via Mobile Device

theastronaut · 03-23-2013, 01:48 PM

What can I say...

Dinos63 · 03-23-2013, 03:33 PM

only problem i see is were is the tv

03-22-2013, 05:20 PM	#1
Trsmotrhed Registered User Join Date: Mar 2012 Location: Pueblo West, Colorado Posts: 430	You gotta see this picture I bought some floor pans from a guy off craigslist. My brother picked them up for me and this is the pic my brother sent me. The guys been building this truck in his house for 15 years. He also had a crate 427 in his living room. Posted via Mobile Device __________________ Sold the 63 and have a 68 now. 63 SWB C10 LT1/4L60E, PS, PB, Disk Brakes, CPP 4" drop coil rear, 2.5" drop spindle w/ 1" drop coil. slotted rotors, front and rear sway bars. 18"x8" Cragar SS w/ 245/45R18 http://67-72chevytrucks.com/vboard/s...d.php?t=544174 Last edited by Trsmotrhed; 03-22-2013 at 05:21 PM. Reason: added engine pic

03-22-2013, 06:08 PM	#2
grumpy Registered User Join Date: Feb 2007 Location: NE Ohio Posts: 737	Re: You gotta see this picture Haha. that dude is single.... __________________ Tim Road Hounds

03-22-2013, 06:13 PM	#3
concretekiller Registered User Join Date: Jan 2009 Location: houston Posts: 196	Re: You gotta see this picture 'Murica! Posted via Mobile Device

03-22-2013, 07:11 PM	#4
Rich 5150 69 Registered User Join Date: Nov 2009 Location: Galt, Calif Posts: 2,437	Re: You gotta see this picture Build your truck while dinning I guess.... Posted via Mobile Device __________________ `64 C10 vortec 350/350/373 posi `69 RS/SS 350/350/308 `37 Ford 406/350/324 traclock `68 Dart 370/904/323 suregrip

03-22-2013, 07:35 PM	#5
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,540	Re: You gotta see this picture Hey! That's my living room! Jk, but I would do it if I had to Posted via Mobile Device __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

03-22-2013, 07:36 PM	#6
'63GENIII Registered User Join Date: Sep 2008 Location: San Carlos, Ca. Posts: 3,048	Re: You gotta see this picture Looks to coming along nicely, LOL. I wondered how he was going to get it out , but then started thinking about how he got it in? Must be a ship in a bottle kinda thing; __________________ Chris '63 k15 long step Vortec 7.4 - L29 Blackbear tune, Five 0 Motorsports injectors, Chris Straub Cam, NV4500, divorced 205 52" front and 63" rear spring swap D44 / 14bff - disc axles Milemarker 9K and 10.5K hydraulic winches 63" & B52 Spring Install http://67-72chevytrucks.com/vboard/s...ng+swap+thread NV4500 Reverse Build Thread http://67-72chevytrucks.com/vboard/s...=reverse+build L29 - 7.4 Vortec Build http://67-72chevytrucks.com/vboard/s...&highlight=L29

03-22-2013, 07:40 PM	#7
YBNORML Registered User Join Date: May 2010 Location: Edmonton, Alberta Posts: 3,847	Re: You gotta see this picture I'm saving this pic! Now every time my wife complains, I'm going to show this one Posted via Mobile Device __________________ --------------------------------------------------------------- Jason. 68’ GMC shortbox https://67-72chevytrucks.com/vboard/...d.php?t=794201 72' 2WD Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=425385 67' LongBox C-10 http://67-72chevytrucks.com/vboard/s...d.php?t=691845 InstaGram ybnorml67

03-22-2013, 08:38 PM	#8
Lugnutz65 Registered User Join Date: Jan 2013 Location: Columbia, SC Posts: 1,926	Re: You gotta see this picture OK, a little off the subject but, I went to school with a guy and his dad (a doctor of all things) built an AIRPLANE inside his house. They had to remove a wall to get the plane out of the house when it was finished. The story made the local paper and I saw the article. There are some crazy people out there. __________________ My 65 C10 build: www.lugnutz65chevystepside.weebly.com Want to know more about T5 transmissions? My website has a T5 Info Page and a Step by Step T5 rebuild.

03-22-2013, 08:48 PM	#10
RANDY COX Registered User Join Date: Mar 2001 Location: RADFORD, VA Posts: 2,651	Re: You gotta see this picture Good day hope he's not doing any welding in there,with that carpet floor.And my wife say I'm crazy...He,He... __________________ 1964 BBC 402 4x4

03-22-2013, 08:57 PM	#11
Trsmotrhed Registered User Join Date: Mar 2012 Location: Pueblo West, Colorado Posts: 430	Re: You gotta see this picture I don't think welding would go over to good either in your living room. Posted via Mobile Device __________________ Sold the 63 and have a 68 now. 63 SWB C10 LT1/4L60E, PS, PB, Disk Brakes, CPP 4" drop coil rear, 2.5" drop spindle w/ 1" drop coil. slotted rotors, front and rear sway bars. 18"x8" Cragar SS w/ 245/45R18 http://67-72chevytrucks.com/vboard/s...d.php?t=544174

03-22-2013, 09:17 PM	#12
Slow Build Registered User Join Date: Sep 2009 Location: California Delta Posts: 2,163	Re: You gotta see this picture There is something about the temperature controlled work area that appeals to me here. __________________ Name: Rich Current Ride: 1964 C-10 Short Fleetside Daily Driver: 2005 GMC crew cab short fleetside /2001 Chevy Tahoe Past GM Trucks: 1959 GMC short stepside 1968 GMC short stepside-4x4 1973 Chevy short stepside 1989 Chevy short fleetside-reg cab 1993 Chevy short fleetside-Xcab 2002 Chevy short fleetside-Xcab Save the dinosaurs, use synthetic oil.

03-22-2013, 10:50 PM	#15
donthekawguy Registered User Join Date: Aug 2012 Location: Rathdrum ID Posts: 1,128	Re: You gotta see this picture As soon as I kicked the old lady out a couple years ago, I moved a motorcycle into the diningroom. Just for the winter. Now ever winter I pull a bike in to rebuild it. I wish I had room for my truck tho! __________________ 66 shorty

03-23-2013, 01:27 AM	#17
KroAutomotiveInc Registered User Join Date: Jun 2010 Location: UT Posts: 908	Re: You gotta see this picture my grandfathers favorite spot to work on his old chopper was in the dinning room lol my grandpa and this guy would hit it off in to time lol! __________________ Car & Truck Projects Google Community. https://plus.google.com/communities/...80679980403145 Youtube channel. http://www.youtube.com/channel/UC2HB...view_as=public 1964 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=419525

03-23-2013, 05:53 AM	#18
chuckmc8 It's alsways something..... Join Date: Nov 2008 Location: Douglasville GA Posts: 1,171	Re: You gotta see this picture It like the episode of Andy Griffith show when Gomer reassembled that car in the jail house __________________ 1968 RS Camaro 'Vert Matching number 327 and M21 Muncie 1968 C10 Black with red interior and orig paint. 5.3 / 4l60e,3:73 POSI 17" Torq Thrusts 1968 CST 514 Red with black interior. Buddy Buckets, Factory A/C, PS, PB- 20" AR custom shop TT, 5.3 and 4l60e

03-23-2013, 06:06 AM	#19
darkhorse970 Registered User Join Date: May 2009 Location: Monroe, LA Posts: 2,103	Re: You gotta see this picture Its a sickness I tell ya... I worked for a guy that rebuilt a '49 Harley in his living room...he was divorced before he finished it, but he did finish the build in there. __________________ Keith SOLD - 1963 C10 Short Fleet 350/700R4 4/6 drop 1967 GMC Super Custom - Short Fleet COPO concept w/427 BBC T-400 w/Doug Nash overdrive 4/6 Drop, Buddy Buckets, etc... Frame Off (In Progress) I call it "Vulgar Display of Power" 1980 Silverado Original paint 49k Original miles 4/6 drop Check out my build thread here: http://67-72chevytrucks.com/vboard/s...=1#post6209941



Register or Log In To remove these advertisements.

03-23-2013, 07:56 AM	#20
rideblue00 Senior Member Join Date: Feb 2010 Location: Lambertville, MI Posts: 1,859	Re: You gotta see this picture Wheres the cab........? Thats my new desktop pic! lol

03-23-2013, 01:48 PM	#24
theastronaut Registered User Join Date: May 2011 Location: Anderson SC Posts: 3,881	Re: You gotta see this picture What can I say... Attached Images __________________ Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc

03-23-2013, 03:33 PM	#25
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: You gotta see this picture only problem i see is were is the tv __________________ CHEVY ONLY... Nothin Else !

Register or Log In To remove these advertisements.