|
06-29-2005, 09:37 PM
|
#1 |
|
Senior Member
 
Join Date: Feb 2004
Location: Williamsburg, Ohio
Posts: 1,766
|
Spindle Question
I have a pair of disc spindles with backing plates and rotors. The spindles look like 72 chevy C10 spindles however they have a larger inner bearing. From what I can find out the 1986 GMC C15 may have had an option for 2500# front spindles (normal C10 spindles are 1500#) with the same 5 on 5" bolt pattern.
Can I use these spindles on a 67 C10 if I use 72 upper/lower balljoints and 72 tie rod ends? The rotor diameter and thickness are the same as a 72 chevy. Anyone heard of these spindles? The inner bearing box is Timken LM45858. thanks Last edited by dennislbrooks; 06-29-2005 at 09:38 PM. |
|
|
|
06-29-2005, 10:41 PM
|
#2 |
|
blood type; Retumbo
Join Date: Jan 2004
Location: next to my reloading bench
Posts: 10,269
|
is that the heavy half with the 1.250 thick rotors?
all the parts you mentioned will fit the older arms. thats what I did.
__________________
Man rule #77...if you own a 67 stepside with a caddy 472 you will never be in danger of loosing you man card |
|
|
|
|
06-30-2005, 02:28 AM
|
#3 |
|
Senior Member
Join Date: Sep 2000
Location: Agency IA.
Posts: 1,839
|
Yes use them.
__________________
72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa |
|
|
|
|
06-30-2005, 06:57 AM
|
#4 |
|
Senior Member
Join Date: Feb 2004
Location: Williamsburg, Ohio
Posts: 1,766
|
heavy half???
I looked at the chevy listings for all years to 66-87 and none listed usage of the 2500# spindle/bearing. I thot it may be a Big 10 or a 3/4 ton however the 5 lugs rules that out. GMC is the only place I found it.
Can these spindles be used on a 66 Chevy C10 also with same parts as I described above?? thanks |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
