AAW install - The 1947 - Present Chevrolet & GMC Truck Message Board Network

keel056 · 02-24-2019, 10:53 PM

68 C10 AAW install.
Very nice kit
Easy install just time consuming

**Steeveedee** · 02-26-2019, 10:26 AM

I'm thinking of replacing the wiring in my truck. There's a lot of M Mouse stuff left over from when my FiL owned it. Nice to see that it went easily. Time, I have.

OL SKOOL · 02-26-2019, 11:04 AM

That's good to hear some real life reviews on products we use. Thank you good luck with your truck looking good!

sircrunch · 02-26-2019, 11:36 AM

does the kit come with all wires needed including wires to the starter/ battery cables/ ground wires for grounding the chassis to the body/ body to engine etc etc????

TruDom · 02-26-2019, 12:18 PM

Quote:

Originally Posted by sircrunch

does the kit come with all wires needed including wires to the starter/ battery cables/ ground wires for grounding the chassis to the body/ body to engine etc etc????

the kit designed for these year trucks do not come with battery cables or ground wires.

**MySons68C20** · 02-26-2019, 03:18 PM

Doing this now....top shelf product with excellent instructions and very complete.

**michael bustamante** · 02-26-2019, 03:26 PM

di you happrn to notice if there was a different part number for 67-68`s? as the plug thru the firewall is different. also did you have to mount the firewall plug with those screws sticking out?

**MySons68C20** · 02-26-2019, 06:47 PM

Quote:

Originally Posted by michael bustamante

di you happrn to notice if there was a different part number for 67-68`s? as the plug thru the firewall is different. also did you have to mount the firewall plug with those screws sticking out?

Hi Michael, the kit is for a 67-72 so I'm assuming the part # is correct.
The screws you see are what is provided in the kit but I will change mine out for something different for sure. I'm going to end up cutting them off close to flush or through bolting with the nuts on the inside.

cleszkie · 02-26-2019, 08:18 PM

Does the kit come with some way to cover up the cut in the firewall around the bulkhead connector? I believe the stock bulkhead connector on the engine compartment side is actually larger than the hole in the firewall so it conceals the hole and allows for a seal to be used between the connector and firewall. Seems like AAW should address this if they haven't already.

**MySons68C20** · 02-26-2019, 08:38 PM

The kit comes with a template for the firewall opening.
I cut my hole as tight as possible and the gap you see is overlapped by the gasket inside......I hope that makes sense

keel056 · 02-26-2019, 11:08 PM

Looking good!!!

Quote:

Originally Posted by MySons68C20

The kit comes with a template for the firewall opening.
I cut my hole as tight as possible and the gap you see is overlapped by the gasket inside......I hope that makes sense

keel056 · 02-26-2019, 11:11 PM

I am pretty sure the part number for the 67 is the same.

Quote:

Originally Posted by michael bustamante

di you happrn to notice if there was a different part number for 67-68`s? as the plug thru the firewall is different. also did you have to mount the firewall plug with those screws sticking out?

**jeffahart** · 02-27-2019, 01:17 PM

Quote:

Originally Posted by cleszkie

Does the kit come with some way to cover up the cut in the firewall around the bulkhead connector? I believe the stock bulkhead connector on the engine compartment side is actually larger than the hole in the firewall so it conceals the hole and allows for a seal to be used between the connector and firewall. Seems like AAW should address this if they haven't already.

There is foam on the inside that seals. If you want a real clean look in the engine bay then you need to do a bit of work, or make a collar or something. But it does seal.

j

cleszkie · 03-01-2019, 04:10 PM

Ok. Thanks for all the replies about the bulkhead connector seal! Good to know for a future project that I want to use the AAW kit on.

elf w/capital T · 03-02-2019, 08:33 AM

With my previous owners and their HACK jobs on the wiring, having my AAW kit was and still is one of my favorite investments on the truck nice truck

02-24-2019, 10:53 PM	#1
keel056 Registered User Join Date: Oct 2017 Location: Houston, Tx Posts: 26	AAW install 68 C10 AAW install. Very nice kit Easy install just time consuming Attached Images

02-26-2019, 10:26 AM	#2
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,335	Re: AAW install I'm thinking of replacing the wiring in my truck. There's a lot of M Mouse stuff left over from when my FiL owned it. Nice to see that it went easily. Time, I have. __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA

02-26-2019, 11:04 AM	#3
OL SKOOL Registered User Join Date: Feb 2010 Location: rochelle il. Posts: 356	Re: AAW install That's good to hear some real life reviews on products we use. Thank you good luck with your truck looking good!

02-26-2019, 11:36 AM	#4
sircrunch Registered User Join Date: Apr 2016 Location: Anderson, SC Posts: 160	Re: AAW install does the kit come with all wires needed including wires to the starter/ battery cables/ ground wires for grounding the chassis to the body/ body to engine etc etc????

02-26-2019, 03:18 PM	#6
MySons68C20 Senior Member Join Date: Sep 2014 Location: Wenatchee, Wa Posts: 908	Re: AAW install Doing this now....top shelf product with excellent instructions and very complete.

02-26-2019, 03:26 PM	#7
michael bustamante Registered User Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,843	Re: AAW install di you happrn to notice if there was a different part number for 67-68`s? as the plug thru the firewall is different. also did you have to mount the firewall plug with those screws sticking out? __________________ 1967custom

02-26-2019, 08:18 PM	#9
cleszkie Registered User Join Date: Feb 2003 Location: Santa Ana, CA Posts: 2,191	Re: AAW install Does the kit come with some way to cover up the cut in the firewall around the bulkhead connector? I believe the stock bulkhead connector on the engine compartment side is actually larger than the hole in the firewall so it conceals the hole and allows for a seal to be used between the connector and firewall. Seems like AAW should address this if they haven't already.

02-26-2019, 08:38 PM	#10
MySons68C20 Senior Member Join Date: Sep 2014 Location: Wenatchee, Wa Posts: 908	Re: AAW install The kit comes with a template for the firewall opening. I cut my hole as tight as possible and the gap you see is overlapped by the gasket inside......I hope that makes sense Attached Images

03-01-2019, 04:10 PM	#14
cleszkie Registered User Join Date: Feb 2003 Location: Santa Ana, CA Posts: 2,191	Re: AAW install Ok. Thanks for all the replies about the bulkhead connector seal! Good to know for a future project that I want to use the AAW kit on.

03-02-2019, 08:33 AM	#15
elf w/capital T Registered User Join Date: Feb 2011 Location: North Carolina Posts: 993	Re: AAW install With my previous owners and their HACK jobs on the wiring, having my AAW kit was and still is one of my favorite investments on the truck nice truck



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.