Is steering damper bushing sleeve needed Dana 60 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**jeffahart** · 07-17-2014, 09:50 PM

I just put a dana 60 in my K20. There was no steering damper or hardware. I ordered a Skyjacker stabilizer and it came with bushing but no metal sleeve.

Is it supposed to be installed with a sleeve?

Thanks,
jeff

lowrollin70gmc · 07-18-2014, 05:30 PM

Some have a tight fit of the bushing onto a bolt intended for mounting shocks. That's how my skyjacker stabilizers are.

If the mounting bolt are the same type as the above picture no sleeve is needed.

**kwmech** · 07-19-2014, 02:15 AM

Quote:

Originally Posted by jeffahart

I just put a dana 60 in my K20. There was no steering damper or hardware. I ordered a Skyjacker stabilizer and it came with bushing but no metal sleeve.

Is it supposed to be installed with a sleeve?

Thanks,
jeff

You should have gotten the bolt which will fit tight in the bushing, a 1'' spacer, which goes in between the shock and the mount and a stud for the tie rod end of the shock with a castle nut. Pics?

**jeffahart** · 07-20-2014, 10:16 PM

They sell skyjacker 9000 stabilizer with or without the hardware. I managed to order without the bolts. Now I need to try and buy bolts alone tomorrow. The kicker is they are the same price with or without the hardware.

07-17-2014, 09:50 PM	#1
jeffahart Senior Member Join Date: May 2012 Location: Scottsdale, AZ Posts: 1,897	Is steering damper bushing sleeve needed Dana 60 I just put a dana 60 in my K20. There was no steering damper or hardware. I ordered a Skyjacker stabilizer and it came with bushing but no metal sleeve. Is it supposed to be installed with a sleeve? Thanks, jeff

07-18-2014, 05:30 PM	#2
lowrollin70gmc Too many projects Join Date: Mar 2004 Location: Fargo, ND land of the flat hills Posts: 1,147	Re: Is steering damper bushing sleeve needed Dana 60 Some have a tight fit of the bushing onto a bolt intended for mounting shocks. That's how my skyjacker stabilizers are. If the mounting bolt are the same type as the above picture no sleeve is needed. __________________ Andrew 84 GMC C1500 SWB 6.2 Diesel/700R4/3.42 "Grandpa's odd duck" 70 GMC C1500 LWB My first truck: shaved, bagged, and more: the lowrollin70gmc 68 K20 Suburban 12V Cummins/NV5600/NP205/D60/11.5AAM 3.73s "Dakota Cadillac" 63 Chevy II Nova Coupe 250 I6/T56/4.56s "Economy car" 53 Willys Wagon 350/NV4500/BW4401/HP D44/9inch “Winter Wagon” 30 Model A 16 Focus ST

07-20-2014, 10:16 PM	#4
jeffahart Senior Member Join Date: May 2012 Location: Scottsdale, AZ Posts: 1,897	Re: Is steering damper bushing sleeve needed Dana 60 They sell skyjacker 9000 stabilizer with or without the hardware. I managed to order without the bolts. Now I need to try and buy bolts alone tomorrow. The kicker is they are the same price with or without the hardware.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.