WTB Lock set for a burb - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Longhorn Man · 12-01-2007, 10:42 PM

I am needing a complete lock set for my 72 burb... both front doors, ignition and rear clamshell tailgate.
Anyone got this?
What would it cost to 43228?

**Hart_Rod** · 12-02-2007, 12:12 PM

Andy,

Everything is the same as the truck except for the clam shell. I haven't heard of anyone making this, but I may be wrong. You might want to post this in suburban section.

R

Longhorn Man · 12-02-2007, 04:43 PM

All the wtb posts get deleted out of there.
I'm hoping to find a used set off of a wrecked or junk burb... one key, all locks, like it is supposed to be.

bobthecop · 12-02-2007, 05:07 PM

If you have all the locks, a locksmith can key them all the same.

Longhorn Man · 12-02-2007, 05:17 PM

Bob, I knew they could do that on new stuff, but on these old ones too though?

cheyenne10 · 12-02-2007, 10:22 PM

I used new door lock and ignition set and had my rear lock rekeyed to match. $30 lock set and $20 rekey.

(rear handle rechromed too)

Longhorn Man · 12-02-2007, 10:48 PM

awesome info.
Thank you guys very much.

**LockDoc** · 12-03-2007, 03:46 PM

-
Andy,

if you can't find anyone in your area to do it I can, if you want to ship them.

LockDoc

Longhorn Man · 12-03-2007, 04:09 PM

thanks leon. I'll keep that in mind.
Right now I have 2 keys, one for the drivers door, one for the ignition, nothing fpor the tailgate, and lock the passenger door from inside. I usually don't even lock my doors, if they want my stereo, they'll just knock out a window (i've swept up many a window) but I still want it to be right.

**Hart_Rod** · 12-04-2007, 04:22 PM

I may have an extra tailgate lock. I can look when I go back to FL on the 21st.

LOCKDOC, I might jump on the re-keying part if you wouldn't mind.

R

Longhorn Man · 12-04-2007, 08:53 PM

actually, now that i know I can rekey them... I actually have a spare hatch/tailgate lock set up.

soba_03 · 12-04-2007, 11:02 PM

Andy,

I just had the doors and rear gate latched matched to my ignition key on my 61 burb. He told me that there was no real difference in the locks from old style to new style and it coct me 35 bucks.

Regards!

I think that I've seen a set for burb in one of may catalogs. If you get to that point and want new let me know I'll look them back up.. I'm into using as much as I can of what I already have....

Good luck...

12-01-2007, 10:42 PM	#1
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	WTB Lock set for a burb I am needing a complete lock set for my 72 burb... both front doors, ignition and rear clamshell tailgate. Anyone got this? What would it cost to 43228?

12-02-2007, 12:12 PM	#2
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,837	Re: WTB Lock set for a burb Andy, Everything is the same as the truck except for the clam shell. I haven't heard of anyone making this, but I may be wrong. You might want to post this in suburban section. R __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

12-02-2007, 04:43 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: WTB Lock set for a burb All the wtb posts get deleted out of there. I'm hoping to find a used set off of a wrecked or junk burb... one key, all locks, like it is supposed to be.

12-02-2007, 05:07 PM	#4
bobthecop Senior Member Join Date: Nov 2006 Location: Yukon Oklahoma Posts: 2,647	Re: WTB Lock set for a burb If you have all the locks, a locksmith can key them all the same. __________________ Happiness is towing your "new" truck home. 1972 C-10 1982 GMC (parts truck??) 1969 c10 parts truck 1969 C-10 ( my sons) 1992 Silverado 4X4 (now the boys truck)(now mine again) 2002 Tarus (my wife loves that car)

12-02-2007, 05:17 PM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: WTB Lock set for a burb Bob, I knew they could do that on new stuff, but on these old ones too though?

12-02-2007, 10:22 PM	#6
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	Re: WTB Lock set for a burb I used new door lock and ignition set and had my rear lock rekeyed to match. $30 lock set and $20 rekey. (rear handle rechromed too) __________________ Bob

12-02-2007, 10:48 PM	#7
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: WTB Lock set for a burb awesome info. Thank you guys very much.

12-03-2007, 03:46 PM	#8
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,390	Re: WTB Lock set for a burb - Andy, if you can't find anyone in your area to do it I can, if you want to ship them. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

12-03-2007, 04:09 PM	#9
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: WTB Lock set for a burb thanks leon. I'll keep that in mind. Right now I have 2 keys, one for the drivers door, one for the ignition, nothing fpor the tailgate, and lock the passenger door from inside. I usually don't even lock my doors, if they want my stereo, they'll just knock out a window (i've swept up many a window) but I still want it to be right.

12-04-2007, 04:22 PM	#10
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,837	Re: WTB Lock set for a burb I may have an extra tailgate lock. I can look when I go back to FL on the 21st. LOCKDOC, I might jump on the re-keying part if you wouldn't mind. R __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

12-04-2007, 08:53 PM	#11
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: WTB Lock set for a burb actually, now that i know I can rekey them... I actually have a spare hatch/tailgate lock set up.

12-04-2007, 11:02 PM	#12
soba_03 Registered User Join Date: Sep 2007 Location: Fairdale, Kentucky Posts: 561	Re: WTB Lock set for a burb Andy, I just had the doors and rear gate latched matched to my ignition key on my 61 burb. He told me that there was no real difference in the locks from old style to new style and it coct me 35 bucks. Regards! I think that I've seen a set for burb in one of may catalogs. If you get to that point and want new let me know I'll look them back up.. I'm into using as much as I can of what I already have.... Good luck...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.