|
09-15-2010, 12:10 AM
|
#1 |
|
Registered User
Join Date: Mar 2010
Location: brandon, ms
Posts: 384
|
throttle linkage
I have already done a search and did not come up with much to answer my question. my truck is a 1960 I have a 350 with edlebrock carb. what do I need for throttle linkage to make the stock pedal work. pics please.
|
|
|
|
09-15-2010, 12:42 AM
|
#2 |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
|
Re: throttle linkage
I have yet to use this, but I'm reasonably certain it would work on our trucks.
http://www.jegs.com/webapp/wcs/store...Term=555-15795
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
09-15-2010, 10:50 AM
|
#3 |
|
Senior Member
Join Date: Oct 2007
Location: Marietta, GA
Posts: 782
|
Re: throttle linkage
This linkage rod is two pieces...one end screws into the other, thus it is adjustable for length. It's a reproduction part for a 67 Camaro with 396.
|
|
|
|
|
09-15-2010, 12:15 PM
|
#4 |
|
It's Better With Nitro
Join Date: Apr 2008
Location: Chino Hills, CA
Posts: 2,261
|
Re: throttle linkage
...very similar to the style of linkage in the previous posts, I fabricated mine from some left over ball/swivel and tubing parts. My linkage has several holes that uses a pin to secure the inner and outer shafts for larger adjustments, and the ball/swivel ends are threaded for finer adjustments.
__________________
1963 C-10: Deluxe-optioned cab, shortbed, fleetside Pontiac 462 ci, Kauffman D-Port alum. heads 4L80E, narrowed sheetmetal Ford 9-inch Tubular front and rear suspension Custom 6-piston front disc and 4-piston rear disc brakes |
|
|
|
|
09-15-2010, 01:09 PM
|
#5 |
|
Senior Enthusiast
Join Date: Feb 2007
Location: Spokane Valley, WA
Posts: 8,356
|
Re: throttle linkage
I’m running a pair of the following cheapy heim joints, with a piece of ¼” all thread connecting the two. Its been working fine for close to 20 years:
http://www.jegs.com/i/Mr.+Gasket/720/3812G/10002/-1   I use a socket head allen bolt for the pivots with safety washers should the heim joint break, then double nut the ends to allow setting the tension for a nice tight slip fit. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
