One Piece Window Kits: Brothers vs. OPP vs. Don't Do It! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

-sean- · 10-04-2011, 10:36 PM

There are a few threads on the topic with varying opinions, no surprise. So lets run a pole and gather some info.
What's your opinion of these kits for use on a truck that is driven daily, year round and not just on occasion. We all know the kits look great once installed which apparently can be a PITA, but is it worth it?

77chris03 · 10-04-2011, 10:41 PM

I dunno i havent installed mine Yet but I have brothers one piece electric Windows. And they are smoked glass.
Posted via Mobile Device

POPO1984 · 10-04-2011, 10:47 PM

Good question

Longhorn Man · 10-04-2011, 11:19 PM

a driver benifits from wing vents if you ever roll down the windows.
I'd like to figure a way to install wing vents on late models so you can roll down the windows withoug being assaulted by the wind.

-sean- · 10-05-2011, 12:11 AM

Quote:

Originally Posted by Longhorn Man

a driver benifits from wing vents if you ever roll down the windows.
I'd like to figure a way to install wing vents on late models so you can roll down the windows withoug being assaulted by the wind.

very good point.

**leddzepp** · 10-05-2011, 10:52 AM

I have never read anything good about one piece windows. I replaced my vent window rubber, and called it a day. How many times do you open the vent window? I do not think I have ever opened mine after replacing the rubber. It seals nice and tight with no noise and did not cost an arm and a leg.

**JJorgensen52** · 10-05-2011, 12:26 PM

Quote:

Originally Posted by leddzepp

I have never read anything good about one piece windows. I replaced my vent window rubber, and called it a day. How many times do you open the vent window? I do not think I have ever opened mine after replacing the rubber. It seals nice and tight with no noise and did not cost an arm and a leg.

I open mine ALL THE TIME

. Definitely keep the vents.

tubbedII · 10-05-2011, 12:34 PM

I keep mine open even when I'm topless...

**leddzepp** · 10-05-2011, 12:43 PM

Ackattack · 10-05-2011, 12:48 PM

I have the Brothers kit on my 68. The look nice, but the don't seal up when rolled up so I get a lot of wind noise doing 75, they were a huge pain to install because the instructions are horrible, and they rattle around when the windows are rolled down. Since I don't drive my 68 that often its not a big deal. For a daily driver I would hate them.

big_al_71 · 10-05-2011, 12:50 PM

Keep the vents!!!!

-sean- · 10-05-2011, 02:11 PM

hhmmm, the voting is just a little tilted here.

Lee H · 10-05-2011, 02:54 PM

My 72 is a DD. I use the vent window all the time. I can't imagine not having them.
Posted via Mobile Device

Lemield · 10-05-2011, 03:14 PM

I have the Brothers kit in my CST.

Good: Pretty quiet on the highway and they seal up nicely when rolled up.
They look nice too. I installed them with manual cranks and then converted to electric windows later on...much better with electrics.

Bad: They rattle and are very wobbly when rolled part way down. The seals that come with the kit are OK but they could be a lot better. Instructions were OK but not great. Didn't like the fact that I had to cut my doors to install them.

Bottom line, I also do not drive it that often but if I did, I'd probably want the wing windows back.

Sean...if you want to look at them in person, let me know...

-sean- · 10-05-2011, 03:24 PM

Quote:

Originally Posted by Lemield

Sean...if you want to look at them in person, let me know...

Thanks for the offer Larry.

SBTork · 10-05-2011, 06:31 PM

One of many cool features these old trucks have. Keep 'em

vectorit · 10-05-2011, 07:10 PM

Being that both my rigs are non AC, I use my wing vents all of the time.

70-Shorty · 10-05-2011, 08:30 PM

Quote:

Originally Posted by Longhorn Man

a driver benifits from wing vents if you ever roll down the windows.
I'd like to figure a way to install wing vents on late models so you can roll down the windows withoug being assaulted by the wind.

My late model rides all have kickass AC with tinted windows, i rarely need to have the windows down, nor the need for wing windows. Besides, better aerodynamics....lol

i was gonna say who needs vent windows with AC? Vent windows to me are more of a nuisance than anything, in addition a easy way for scumbags to break into your ride. Somewhere in the future, i'm gonna do the one piece windows, i'd like to know if the OPP are the better version vs. the Brothers kit. Not EVERYBODY is going for the resto-original look.
Tim

**lolife99** · 10-05-2011, 09:05 PM

Don't do it!

-sean- · 10-05-2011, 11:56 PM

Quote:

Originally Posted by lolife99

Don't do it!

come on, don't hold back... tell us how you REALLY feel!

BrianV · 10-06-2011, 12:47 AM

i just put a set of brothers in my truck - they were easy to install and look great - havent driven the truck yet but i hope they work as good as they look

**rob32472** · 10-06-2011, 06:39 AM

If you have the skills go with opp..... I wasn't happy with the kit as it left a little to be desired but with a few mods the windows do work well,dont rattle, and seal up nice with no wind noise.

DJMAN · 10-06-2011, 09:44 AM

Quote:

Originally Posted by rob32472

If you have the skills go with opp..... I wasn't happy with the kit as it left a little to be desired but with a few mods the windows do work well,dont rattle, and seal up nice with no wind noise.

A little more details please.

I really want these windows.

superchevy · 10-06-2011, 11:15 AM

I installed the Brothers kit on my K25.
They were fairly easy to install, except do not use the glass setting "tape" when installing the window glass into the channel...use urethane instead...much easier.
I've driven the truck around a bit with the windows down and they do not rattle at all, nor do they rattle when opening/closing the doors, but yes, they do kind of flop around a little when you are rolling them up or down.
Hope this helps,
SC

eightbanger · 10-06-2011, 11:25 AM

I love vents, but then I grew up in a time when all cars had em.

View Poll Results: I say...
go with Brothers	9	12.33%
go with OPP	5	6.85%
DON'T DO IT... keep the vents	59	80.82%
Voters: 73. You may not vote on this poll

10-04-2011, 10:36 PM	#1
-sean- Registered User Join Date: Jul 2008 Location: Colorado Posts: 484	One Piece Window Kits: Brothers vs. OPP vs. Don't Do It! There are a few threads on the topic with varying opinions, no surprise. So lets run a pole and gather some info. What's your opinion of these kits for use on a truck that is driven daily, year round and not just on occasion. We all know the kits look great once installed which apparently can be a PITA, but is it worth it?

10-04-2011, 10:41 PM	#2
77chris03 Registered User Join Date: Jun 2009 Location: CoNrOe Tx Posts: 1,343	Re: One Piece Window Kits: Brothers vs. OPP vs. Don't Do It! I dunno i havent installed mine Yet but I have brothers one piece electric Windows. And they are smoked glass. Posted via Mobile Device __________________ 68 C10 Stepper #1- GONE 68 C10 Stepper #2 1977 Chevy Cheyenne...gone...was my first Chevy 04 Tahoe Z71, 04 Silverado 2500HD, 04 Sierra 2500HD 99 Sierra Stepside, 17 Denali HD, 84 K10 My 1st build-- http://67-72chevytrucks.com/vboard/s...d.php?t=379333 My 2nd build-- http://67-72chevytrucks.com/vboard/s...d.php?t=700310

10-04-2011, 10:47 PM	#3
POPO1984 Registered User Join Date: Jul 2009 Location: Houston, Tx Posts: 1,133	Re: One Piece Window Kits: Brothers vs. OPP vs. Don't Do It! Good question __________________ 1972 SWB Medium Olive South Houston Instagram: Antbish84

10-04-2011, 11:19 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: One Piece Window Kits: Brothers vs. OPP vs. Don't Do It! a driver benifits from wing vents if you ever roll down the windows. I'd like to figure a way to install wing vents on late models so you can roll down the windows withoug being assaulted by the wind.

10-05-2011, 10:52 AM	#6
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,022	Re: One Piece Window Kits: Brothers vs. OPP vs. Don't Do It! I have never read anything good about one piece windows. I replaced my vent window rubber, and called it a day. How many times do you open the vent window? I do not think I have ever opened mine after replacing the rubber. It seals nice and tight with no noise and did not cost an arm and a leg. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

10-05-2011, 12:34 PM	#8
tubbedII needs more $$$ Join Date: Mar 2004 Location: Sacramento Posts: 1,936	Re: One Piece Window Kits: Brothers vs. OPP vs. Don't Do It! I keep mine open even when I'm topless... __________________ 1970 2wd Blazer

10-05-2011, 12:43 PM	#9
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,022	Re: One Piece Window Kits: Brothers vs. OPP vs. Don't Do It! __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

10-05-2011, 12:48 PM	#10
Ackattack Senior Member Join Date: Aug 2002 Location: Valley Center KS Posts: 3,525	Re: One Piece Window Kits: Brothers vs. OPP vs. Don't Do It! I have the Brothers kit on my 68. The look nice, but the don't seal up when rolled up so I get a lot of wind noise doing 75, they were a huge pain to install because the instructions are horrible, and they rattle around when the windows are rolled down. Since I don't drive my 68 that often its not a big deal. For a daily driver I would hate them. __________________ Project Bruiser: 68 Pro-Touring C-10 5.3L / 4L60E Project Ironhide: 97 GMC Crew Cab 4x4 Cummins SOLD: '69 GMC 1/2T SWB TBI'd: Project No Buck Assembly Manual Index Sign up Thread!!! Factory Service Manual Index

10-05-2011, 12:50 PM	#11
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: One Piece Window Kits: Brothers vs. OPP vs. Don't Do It! Keep the vents!!!! __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

10-05-2011, 02:11 PM	#12
-sean- Registered User Join Date: Jul 2008 Location: Colorado Posts: 484	Re: One Piece Window Kits: Brothers vs. OPP vs. Don't Do It! hhmmm, the voting is just a little tilted here.

10-05-2011, 02:54 PM	#13
Lee H Registered User Join Date: Jun 2010 Location: Upland Ca Posts: 4,147	Re: One Piece Window Kits: Brothers vs. OPP vs. Don't Do It! My 72 is a DD. I use the vent window all the time. I can't imagine not having them. Posted via Mobile Device __________________ 1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703

10-05-2011, 03:14 PM	#14
Lemield Registered User Join Date: Dec 2004 Location: Arvada Colorado Posts: 1,321	Re: One Piece Window Kits: Brothers vs. OPP vs. Don't Do It! I have the Brothers kit in my CST. Good: Pretty quiet on the highway and they seal up nicely when rolled up. They look nice too. I installed them with manual cranks and then converted to electric windows later on...much better with electrics. Bad: They rattle and are very wobbly when rolled part way down. The seals that come with the kit are OK but they could be a lot better. Instructions were OK but not great. Didn't like the fact that I had to cut my doors to install them. Bottom line, I also do not drive it that often but if I did, I'd probably want the wing windows back. Sean...if you want to look at them in person, let me know... __________________ Larry 1949 Willys CJ2A, Kubota Turbo Diesel engine, Warn Overdrive, 11 inch brakes, 12volt, Warn M8000 Winch "Little Green" 1970 Rustoleum Roller Red C20 Custom Camper 454 TH400 "Big Red" 1971 K20 6.2 Turbo Diesel 4x4 4spd Ranger Overdrive "Pumpkin Wagon" 2005 VW Beetle Diesel 44+ MPG "Silver Bullet"

10-05-2011, 06:31 PM	#16
SBTork Garage wrench Join Date: Feb 2008 Location: LaCrosse, WI Posts: 1,855	Re: One Piece Window Kits: Brothers vs. OPP vs. Don't Do It! One of many cool features these old trucks have. Keep 'em __________________ -Adam 90 V1500 GMC Suburban 350/700R4/NP241..... 01 Saturn SL1 stock DD.....

10-05-2011, 07:10 PM	#17
vectorit What? Join Date: Jun 2007 Location: Southern California Posts: 7,617	Re: One Piece Window Kits: Brothers vs. OPP vs. Don't Do It! Being that both my rigs are non AC, I use my wing vents all of the time. __________________ Chris 1968 K20 Suburban 1972 K10 LWB PU



Register or Log In To remove these advertisements.

10-05-2011, 09:05 PM	#19
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: One Piece Window Kits: Brothers vs. OPP vs. Don't Do It! Don't do it! __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

10-06-2011, 12:47 AM	#21
BrianV Registered User Join Date: Mar 2010 Location: Mesa, Az Posts: 364	Re: One Piece Window Kits: Brothers vs. OPP vs. Don't Do It! i just put a set of brothers in my truck - they were easy to install and look great - havent driven the truck yet but i hope they work as good as they look

10-06-2011, 06:39 AM	#22
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,505	Re: One Piece Window Kits: Brothers vs. OPP vs. Don't Do It! If you have the skills go with opp..... I wasn't happy with the kit as it left a little to be desired but with a few mods the windows do work well,dont rattle, and seal up nice with no wind noise.

10-06-2011, 11:15 AM	#24
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	Re: One Piece Window Kits: Brothers vs. OPP vs. Don't Do It! I installed the Brothers kit on my K25. They were fairly easy to install, except do not use the glass setting "tape" when installing the window glass into the channel...use urethane instead...much easier. I've driven the truck around a bit with the windows down and they do not rattle at all, nor do they rattle when opening/closing the doors, but yes, they do kind of flop around a little when you are rolling them up or down. Hope this helps, SC Attached Images __________________ '68 CST SWB factory 396/T400 buddy buckets, a/c, ps, pb '72 Corvette convertible 454/4spd/ac, ps, pb '73 GMC Sierra Grande short wide 454/T400 ps, pb, ac '77 K5 Blazer black on red, 350/T350/NP205 ps, pb, ac all original '78 GMC Sierra Classic short wide 454/T400 ps, pb, ac '72 GMC Sprint SP454. 1 of 38 built. '73 GMC Sprint SP454. 1 of 71 built. '75 GMC Sprint SP454. 1 of 25 built. SOLD! '72 GMC K25 4x4 468/4L80e/NP205 build thread http://67-72chevytrucks.com/vboard/s...23#post4324423 SOLD!'55 Chevy gasser 496/4spd build thread http://67-72chevytrucks.com/vboard/s...96#post4324396

10-06-2011, 11:25 AM	#25
eightbanger 454 MAKES IT ROAR Join Date: Jan 2008 Location: Essex, U.K Posts: 2,701	Re: One Piece Window Kits: Brothers vs. OPP vs. Don't Do It! I love vents, but then I grew up in a time when all cars had em. __________________ Nigel. An American living in a British body. 1971 Chevy Cheyenne 10 454 "In a time of universal deceit, telling the truth becomes a revolutionary act." - George Orwell "When injustice becomes law, resistance becomes duty" - Thomas Jefferson No more pain. 03.12.60 -- 12.28.10 http://www.youtube.com/Eightbanger

Register or Log In To remove these advertisements.