67 c-10 wheel and tire size?? Help! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ryan40601 · 10-10-2016, 08:39 PM

Hello all! I'm trying to figure out what size rally wheel and tire will look good with my stock ride height 67 c-10 .
My front fender at the highest point from the floor is 32 5/8"
Rear is 33 5/8"
I was considering 225/70 15 BFGs, on 7" rally's (67 corvette style )
But think 235/70 may look better as far as fillin up wheel well .
I have 6 lug stock drum brakes .
I think my problem is stock ride height! I love the lowered look but need to keep it stock .
Just tryin to dress it up a little so I could cruise out on hwy.

TwoFiftyShifter · 10-10-2016, 09:32 PM

They sound small at stock ride height. You at least want 235/75r15. Here is my 71 at stock height. Front is 30x9.50-15 and rear 265/75r15. 8" wheels.

Here it is on flatter ground with 235/75s and same wheels.

**Canuckvetter** · 10-12-2016, 10:25 PM

I run 235/75R-15's on both trucks. I think it looks the best as stock height or with drop.

http://67-72chevytrucks.com/vboard/a...1&d=1476325239

50mercfan · 10-15-2016, 05:31 PM

look into p255/70r15. Ive used those serveral times. should be perfect on your 7 inch rallies.

10-10-2016, 08:39 PM	#1
Ryan40601 Registered User Join Date: Jul 2016 Location: Port Jefferson NY Posts: 46	67 c-10 wheel and tire size?? Help! Hello all! I'm trying to figure out what size rally wheel and tire will look good with my stock ride height 67 c-10 . My front fender at the highest point from the floor is 32 5/8" Rear is 33 5/8" I was considering 225/70 15 BFGs, on 7" rally's (67 corvette style ) But think 235/70 may look better as far as fillin up wheel well . I have 6 lug stock drum brakes . I think my problem is stock ride height! I love the lowered look but need to keep it stock . Just tryin to dress it up a little so I could cruise out on hwy.

10-10-2016, 09:32 PM	#2
TwoFiftyShifter Registered User Join Date: Nov 2008 Location: Gwinnett GA Posts: 1,803	Re: 67 c-10 wheel and tire size?? Help! They sound small at stock ride height. You at least want 235/75r15. Here is my 71 at stock height. Front is 30x9.50-15 and rear 265/75r15. 8" wheels. Here it is on flatter ground with 235/75s and same wheels. __________________ 1982 K10 SWB 1987 V20 - Sold - Doh! Last edited by TwoFiftyShifter; 10-10-2016 at 09:39 PM.

10-12-2016, 10:25 PM	#3
Canuckvetter How did I get this OLD! Join Date: Dec 2014 Location: Lamont County, AB, CANADA Posts: 1,045	Re: 67 c-10 wheel and tire size?? Help! I run 235/75R-15's on both trucks. I think it looks the best as stock height or with drop. http://67-72chevytrucks.com/vboard/a...1&d=1476325239 Attached Images __________________ 1967 Oshawa built LWB Fleetside. 327,3 OTT, 515 Vermilion, CST, PS, PB, Shoulder Harness, Tach,Vac, Speed Warning, Choke Delete, Manual Throttle, Fawn interior. Dealer installed A/C 04/2015, N34 Rosewood Wheel 06/2023 Members who I have met personally. Metaldoc, chevnkevin, 62 Longbed, 72LHorn, 72MARIO, YBNORML, TBONE1964, Classic Bowties, Chevemall, Dagnabbitt.

10-15-2016, 05:31 PM	#4
50mercfan Registered User Join Date: Feb 2006 Location: henderson ky Posts: 196	Re: 67 c-10 wheel and tire size?? Help! look into p255/70r15. Ive used those serveral times. should be perfect on your 7 inch rallies.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.