2 doors and high back buckets - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 03-03-2003, 04:32 PM

I have 2 good doors off a 78 blazer and a set of highback buckets too. No console. $100 OBO for the pair of doors and $100 OBO for the buckets. NO shipping

ChrisK10 · 03-03-2003, 07:27 PM

Hi,

Do you know if the bucket seats would fit into a 79 K10 truck? Do you mean 100 bucks for both? Thanks in advance.

-Chris

teeitup · 03-03-2003, 07:47 PM

Yes, they'd fit in a regular cab, actually some regular cabs came out with high back buckets. You would need brackets for pass side though since these are blazer seats. Yes $100 for pair. Thanks Randy

teeitup · 03-03-2003, 10:40 PM

Drivers seat is on the left a couple tears in it and needs cleaned up, pass seat is good condition.

teeitup · 03-03-2003, 10:42 PM

tears in drivers seat

YankeeWhite · 03-04-2003, 12:21 AM

What shape are those doors in?
Got any other parts?

teeitup · 03-04-2003, 09:17 AM

The doors aren't bad no rust on the outside just some around the seems on the inside, I'll get some pics later on today. I don't have anything else for these years. Thanks Randy

teeitup · 03-04-2003, 08:53 PM

Sorry never got any pics today I will tomorrow, Thanks Randy

teeitup · 03-05-2003, 05:41 PM

pic

teeitup · 03-05-2003, 05:42 PM

pic 2

teeitup · 03-05-2003, 05:43 PM

pic 3

teeitup · 03-05-2003, 05:48 PM

pic 4

YankeeWhite · 03-05-2003, 11:14 PM

Correct me if I am wrong, but those fit trucks too, right?
Hard to tell from pictures, but how straight are they, major dents or dings. The rust on the sealant on the inside, it hasn't gone through anywhere?
Windows work okay?

teeitup · 03-05-2003, 11:25 PM

They are the same as trucks. The rust hasn't got through to the outside. The drivers side has no dents, the pass side has a dent right below door lock and the seams on inside have a tad bit more rust on them but still not through. I have to check the windows to make sure they work OK. I have the original mirrors for the doors for $30 also. They are the big chrome ones. Thanks let me know Randy

YankeeWhite · 03-05-2003, 11:37 PM

You going to be around at all this weekend? Might have to check 'em out.

teeitup · 03-05-2003, 11:43 PM

I could be around Sunday if you want to come up. Thanks Randy

littlebubba · 03-08-2003, 01:27 AM

Hey Randy is the driveshaft from that 2 WD Blazer still with it? I need one.

teeitup · 03-08-2003, 10:29 AM

I'm going over there in a few days I'll check. Thanks Randy

littlebubba · 03-22-2003, 12:31 AM

Randy; did you ever check on the 2WD Blazer driveshaft for me? What gears (ratio) were in that rearend? Would you sell them?

littlebubba · 03-22-2003, 12:35 AM

Randy; did you ever get a chance to check on the 2WD Blazer driveshaft for me? What ratio gears were in the rearend of that thing, I might be interested in them too.

teeitup · 03-22-2003, 12:35 AM

I went back over there and the blazer was gone I don't know what he did with it, I haven't talked to him yet, sorry, Randy. I still have seats and doors though!

littlebubba · 03-22-2003, 12:42 AM

If you find out anything on it let me know, I sure could use it. Rather than having to go get one made up.

03-03-2003, 04:32 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	2 doors and high back buckets I have 2 good doors off a 78 blazer and a set of highback buckets too. No console. $100 OBO for the pair of doors and $100 OBO for the buckets. NO shipping __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-03-2003, 07:27 PM	#2
ChrisK10 1971 C20 Custom Camper Join Date: Mar 2003 Location: Ames/Shenandoah, IA Posts: 1,435	Hi, Do you know if the bucket seats would fit into a 79 K10 truck? Do you mean 100 bucks for both? Thanks in advance. -Chris __________________ '71 Chevy C20 Custom Camper, 454, TH400 '97 GMC K1500 5.7L

03-03-2003, 07:47 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Yes, they'd fit in a regular cab, actually some regular cabs came out with high back buckets. You would need brackets for pass side though since these are blazer seats. Yes $100 for pair. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-03-2003, 10:40 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Drivers seat is on the left a couple tears in it and needs cleaned up, pass seat is good condition. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-03-2003, 10:42 PM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	tears in drivers seat __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-04-2003, 12:21 AM	#6
YankeeWhite Registered User Join Date: Jan 2002 Location: Manhattan KS USA Posts: 117	What shape are those doors in? Got any other parts?

03-04-2003, 09:17 AM	#7
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	The doors aren't bad no rust on the outside just some around the seems on the inside, I'll get some pics later on today. I don't have anything else for these years. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-04-2003, 08:53 PM	#8
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Sorry never got any pics today I will tomorrow, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-05-2003, 05:41 PM	#9
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	pic __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-05-2003, 05:42 PM	#10
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	pic 2 __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-05-2003, 05:43 PM	#11
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	pic 3 __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-05-2003, 05:48 PM	#12
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	pic 4 __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-05-2003, 11:14 PM	#13
YankeeWhite Registered User Join Date: Jan 2002 Location: Manhattan KS USA Posts: 117	Correct me if I am wrong, but those fit trucks too, right? Hard to tell from pictures, but how straight are they, major dents or dings. The rust on the sealant on the inside, it hasn't gone through anywhere? Windows work okay?

03-05-2003, 11:25 PM	#14
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	They are the same as trucks. The rust hasn't got through to the outside. The drivers side has no dents, the pass side has a dent right below door lock and the seams on inside have a tad bit more rust on them but still not through. I have to check the windows to make sure they work OK. I have the original mirrors for the doors for $30 also. They are the big chrome ones. Thanks let me know Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-05-2003, 11:37 PM	#15
YankeeWhite Registered User Join Date: Jan 2002 Location: Manhattan KS USA Posts: 117	You going to be around at all this weekend? Might have to check 'em out.



Register or Log In To remove these advertisements.

03-05-2003, 11:43 PM	#16
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	I could be around Sunday if you want to come up. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-08-2003, 01:27 AM	#17
littlebubba Registered User Join Date: Jun 2002 Location: Clinton Twp., Michigan Posts: 323	2 WD BLAZER DRIVESHAFT Hey Randy is the driveshaft from that 2 WD Blazer still with it? I need one.

03-08-2003, 10:29 AM	#18
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	I'm going over there in a few days I'll check. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-22-2003, 12:31 AM	#19
littlebubba Registered User Join Date: Jun 2002 Location: Clinton Twp., Michigan Posts: 323	Driveshaft? Randy; did you ever check on the 2WD Blazer driveshaft for me? What gears (ratio) were in that rearend? Would you sell them?

03-22-2003, 12:35 AM	#20
littlebubba Registered User Join Date: Jun 2002 Location: Clinton Twp., Michigan Posts: 323	Driveshaft? Randy; did you ever get a chance to check on the 2WD Blazer driveshaft for me? What ratio gears were in the rearend of that thing, I might be interested in them too.

03-22-2003, 12:42 AM	#22
littlebubba Registered User Join Date: Jun 2002 Location: Clinton Twp., Michigan Posts: 323	Let me know If you find out anything on it let me know, I sure could use it. Rather than having to go get one made up.

Register or Log In To remove these advertisements.