66' c60 Parts for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**richard2717** · 01-07-2016, 05:37 PM

I am not normally over on this side but i have come across a 66' C60 that i am going to part out. Where would be the best place on here to list it? seems like it would be odd man out listing it in the 60-66 section since it is a 60 series. Most of the metal is pretty rusty but didnt know if there were some parts some of you may need. It has a small block with manual and 2 speed rear. The truck was driven to its current spot about 10 years ago and parked.

Thanks
Richard

63 & 64 Bowties · 01-08-2016, 09:36 AM

Since there's no Heavy Haulers parts for sale section, this seems like the best spot. I changed your title to add the words "parts for sale"
Good luck.

**richard2717** · 01-08-2016, 09:53 AM

Thank You Bill. Just wanted to make sure I was doing it correctly before getting in trouble

**richard2717** · 01-08-2016, 10:04 AM

Here are some more pictures of the truck. I only have a short time to get off the parts anyone might need before I have to turn it over to the scrapyard. The bottoms of the doors are somewhat rusty but they open and close real nice. Hood is toast cab has major rust over the windshield. Bench seat folds forward.

Just so I don't break rules

horn button $10 plus shipping
steering wheel $40 plus shipping

See anything else just ask. Nothing has been taken off the truck as of yet so everything is pending I can get it removed without damage.

Richard

**richard2717** · 01-08-2016, 10:06 AM

another pic

Greg63 · 01-08-2016, 06:17 PM

The grille is sale-able. I don't want or need it (I have one) but I know you can sell it.
Don't let it go to the scrapyard.
Greg.

Ronzo · 01-08-2016, 06:29 PM

I agree on the grille.
Had one from a C50 and it shipped to NY state.

**DPowers** · 01-08-2016, 08:38 PM

I would be interested in:
Grill
Radiator shroud
emergency flasher
upper radiator hose
C60 emblems
Trans hump if high one
shipped to 37843

**richard2717** · 01-08-2016, 08:57 PM

I will start pulling this apart in the morning and get pictures and will post prices at that time. Thanks

**special-K** · 01-09-2016, 10:31 AM

I could have used the top had it not had the same rust over the windshield. How are those fenders? If they aren't all ate up they will be wanted by someone. Same with running boards, for that matter. What engine does it have?

**richard2717** · 01-09-2016, 07:47 PM

Tim
The roof is bad toast inside and out. The fenders have some dents in them but "appear" to be rust free as well as the running boards. Hoping to get time tomorrow afternoon to get them pulled off along with front bumper.

The engine does not appear orignal. The breather top has a 350 270 hp sticker on it with a quadrajet 4 bbl. I pulled carb and breather off today when I pulled the upper radiator pipe. It also has a lower radiator pipe that I am going to remove once I get something to catch the antifreeze.

**richard2717** · 01-09-2016, 07:53 PM

Dpowers
I got the grill, flasher,C60 emblems, &upper pipe removed today but had to leave before I could get everything cataloged and pics taken
The fan shroud has a large break all across the top so I doubt you would want it. Do you need the lower radiator pipe as well? The transmission hump appears to bolt on but is flat with the floor. I will try to have pics and prices to u tomorrow including shipping.

Thanks
Richard

**DPowers** · 01-09-2016, 09:56 PM

Sounds great

Quote:

Originally Posted by richard2717

Dpowers
I got the grill, flasher,C60 emblems, &upper pipe removed today but had to leave before I could get everything cataloged and pics taken.
The fan shroud has a large break all across the top so I doubt you would want it. Would like pics to see.
Do you need the lower radiator pipe as well? If metal yes
The transmission hump appears to bolt on but is flat with the floor. I will try to have pics and prices to u tomorrow including shipping. ok just let me know.

Thanks
Richard

stsalvage · 01-10-2016, 05:03 PM

I had a blue one but befor i went to pick it up some one destroyed it broke every peace of glass in the truck filled the motor with water.

the truck sat in a field behind the guys house no one touched it for 8 years then when i start making payments to it and done the day i show up with a tow truck.My heart was broken i still towed it home got the water out got the engine to run but not very good.I like to fine one more to rebuild and put a Alison 8 speed trans in and have the 2 speed splitter disc brake front end and run one of them 6.1 new fuel injected motors in it and make it a roll back tow truck

**richard2717** · 01-11-2016, 09:03 AM

Quote:

Originally Posted by DPowers

I would be interested in:
Grill
Radiator shroud
emergency flasher
upper radiator hose
C60 emblems
Trans hump if high one
shipped to 37843

Dwane,
Sent you an email this morning with pictures. Had trouble loading them so let me know if you did not get them.

Thanks
Richard

**DPowers** · 01-11-2016, 09:35 AM

Got them and email returned.

**DPowers** · 01-11-2016, 09:37 AM

Quote:

Originally Posted by 63 & 64 Bowties

Since there's no Heavy Haulers parts for sale section, this seems like the best spot. I changed your title to add the words "parts for sale"
Good luck.

There are alot of parts that would work for 60-66 C10. I would suggest you move it to that area and he would probably get more traffic/interest.

63 & 64 Bowties · 01-11-2016, 09:50 AM

Quote:

Originally Posted by DPowers

There are alot of parts that would work for 60-66 C10. I would suggest you move it to that area and he would probably get more traffic/interest.

I thought about that as well. But, the for sale sections are a different system and threads here can't be moved there.
richard2717, you might want to start a new thread over there.

**richard2717** · 01-11-2016, 06:20 PM

thanks I will keep it in mind once I get pulled off what I can before the scrapper shows up.

**richard2717** · 01-11-2016, 06:21 PM

Dwane
I sent you another email with better pictures of the high hump for clarification

**richard2717** · 01-11-2016, 06:22 PM

Quote:

Originally Posted by special-K

I could have used the top had it not had the same rust over the windshield. How are those fenders? If they aren't all ate up they will be wanted by someone. Same with running boards, for that matter. What engine does it have?

Tim,
Do you think it is worth pulling the inner fenders along with the outers or just the outers?

Richard

**DPowers** · 01-11-2016, 08:08 PM

email returned.

**richard2717** · 01-12-2016, 08:52 AM

C60 emblems
Metal radiator hoses
emergency flasher all sold to Dpowers
Will box up today and ship either today or in the morning

thanks
Richard

**richard2717** · 01-12-2016, 05:15 PM

Dwane
I guess I missed UPS cutoff time for pickup unless they are running late. If they dont get it today they will grab it tomorrow. Will send PM with tracking info.

Richard

**PGSigns** · 01-12-2016, 09:13 PM

Richard I am interested in the cluster, the knobs for the switches, Better pics of the radio, wiper arms and is the door glass soft ray? There is a lot on that truck that fits a C10. I would pull the seat, that entire front end with the running boards and the doors. They are not to bad for east coast doors. All will sell and to nice for the scrapper.
Jimmy

01-07-2016, 05:37 PM	#1
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,089	66' c60 Parts for sale I am not normally over on this side but i have come across a 66' C60 that i am going to part out. Where would be the best place on here to list it? seems like it would be odd man out listing it in the 60-66 section since it is a 60 series. Most of the metal is pretty rusty but didnt know if there were some parts some of you may need. It has a small block with manual and 2 speed rear. The truck was driven to its current spot about 10 years ago and parked. Thanks Richard Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type. Last edited by 63 & 64 Bowties; 01-08-2016 at 09:35 AM.

01-08-2016, 09:36 AM	#2
63 & 64 Bowties and a few others Join Date: Jun 2007 Location: Blue Ridge Mountains of VA Posts: 5,638	Re: 66' c60 Parts for sale Since there's no Heavy Haulers parts for sale section, this seems like the best spot. I changed your title to add the words "parts for sale" Good luck. __________________ Bill US Army Vet -193rd Infantry BlueRidgeMuscleCars.com “The greatness of a nation and its moral progress can be judged by the way its animals are treated” Gandhi

01-08-2016, 09:53 AM	#3
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,089	Re: 66' c60 Parts for sale Thank You Bill. Just wanted to make sure I was doing it correctly before getting in trouble __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

01-08-2016, 10:04 AM	#4
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,089	Re: 66' c60 Parts for sale Here are some more pictures of the truck. I only have a short time to get off the parts anyone might need before I have to turn it over to the scrapyard. The bottoms of the doors are somewhat rusty but they open and close real nice. Hood is toast cab has major rust over the windshield. Bench seat folds forward. Just so I don't break rules horn button $10 plus shipping steering wheel $40 plus shipping See anything else just ask. Nothing has been taken off the truck as of yet so everything is pending I can get it removed without damage. Richard Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type. Last edited by richard2717; 01-16-2016 at 05:42 PM.

01-08-2016, 10:06 AM	#5
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,089	Re: 66' c60 Parts for sale another pic Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

01-08-2016, 06:17 PM	#6
Greg63 Enjoy your truck Join Date: Oct 2007 Location: Newmarket, Ontario, Canada Posts: 1,066	Re: 66' c60 Parts for sale The grille is sale-able. I don't want or need it (I have one) but I know you can sell it. Don't let it go to the scrapyard. Greg. __________________ 1 Corinthians 10:13 1963 Chevrolet 1/2 ton 2010 Camaro SS/RS 2014 Jeep Grand Cherokee 2016 Jeep Cherokee

01-08-2016, 06:29 PM	#7
Ronzo Registered User Join Date: Jul 2014 Location: Ft Whoopup, Ab Posts: 317	Re: 66' c60 Parts for sale I agree on the grille. Had one from a C50 and it shipped to NY state.

01-08-2016, 08:38 PM	#8
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,442	Re: 66' c60 Parts for sale I would be interested in: Grill Radiator shroud emergency flasher upper radiator hose C60 emblems Trans hump if high one shipped to 37843 __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

01-08-2016, 08:57 PM	#9
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,089	Re: 66' c60 Parts for sale I will start pulling this apart in the morning and get pictures and will post prices at that time. Thanks __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

01-09-2016, 10:31 AM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: 66' c60 Parts for sale I could have used the top had it not had the same rust over the windshield. How are those fenders? If they aren't all ate up they will be wanted by someone. Same with running boards, for that matter. What engine does it have? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-09-2016, 07:47 PM	#11
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,089	Re: 66' c60 Parts for sale Tim The roof is bad toast inside and out. The fenders have some dents in them but "appear" to be rust free as well as the running boards. Hoping to get time tomorrow afternoon to get them pulled off along with front bumper. The engine does not appear orignal. The breather top has a 350 270 hp sticker on it with a quadrajet 4 bbl. I pulled carb and breather off today when I pulled the upper radiator pipe. It also has a lower radiator pipe that I am going to remove once I get something to catch the antifreeze. __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

01-09-2016, 07:53 PM	#12
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,089	Re: 66' c60 Parts for sale Dpowers I got the grill, flasher,C60 emblems, &upper pipe removed today but had to leave before I could get everything cataloged and pics taken The fan shroud has a large break all across the top so I doubt you would want it. Do you need the lower radiator pipe as well? The transmission hump appears to bolt on but is flat with the floor. I will try to have pics and prices to u tomorrow including shipping. Thanks Richard __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

01-10-2016, 05:03 PM	#14
stsalvage Scrapper 1 Join Date: Jan 2007 Location: Riverside Calif Posts: 1,649	Re: 66' c60 Parts for sale I had a blue one but befor i went to pick it up some one destroyed it broke every peace of glass in the truck filled the motor with water. the truck sat in a field behind the guys house no one touched it for 8 years then when i start making payments to it and done the day i show up with a tow truck.My heart was broken i still towed it home got the water out got the engine to run but not very good.I like to fine one more to rebuild and put a Alison 8 speed trans in and have the 2 speed splitter disc brake front end and run one of them 6.1 new fuel injected motors in it and make it a roll back tow truck

01-11-2016, 09:35 AM	#16
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,442	Re: 66' c60 Parts for sale Got them and email returned. __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

01-11-2016, 06:20 PM	#19
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,089	Re: 66' c60 Parts for sale thanks I will keep it in mind once I get pulled off what I can before the scrapper shows up. __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.



Register or Log In To remove these advertisements.

01-11-2016, 06:21 PM	#20
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,089	Re: 66' c60 Parts for sale Dwane I sent you another email with better pictures of the high hump for clarification __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

01-11-2016, 08:08 PM	#22
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,442	Re: 66' c60 Parts for sale email returned. __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

01-12-2016, 08:52 AM	#23
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,089	Re: 66' c60 Parts for sale C60 emblems Metal radiator hoses emergency flasher all sold to Dpowers Will box up today and ship either today or in the morning thanks Richard __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

01-12-2016, 05:15 PM	#24
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,089	Re: 66' c60 Parts for sale Dwane I guess I missed UPS cutoff time for pickup unless they are running late. If they dont get it today they will grab it tomorrow. Will send PM with tracking info. Richard __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

01-12-2016, 09:13 PM	#25
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: 66' c60 Parts for sale Richard I am interested in the cluster, the knobs for the switches, Better pics of the radio, wiper arms and is the door glass soft ray? There is a lot on that truck that fits a C10. I would pull the seat, that entire front end with the running boards and the doors. They are not to bad for east coast doors. All will sell and to nice for the scrapper. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

Register or Log In To remove these advertisements.