4x4 engine crossmember question

[v30crewcab]

are you saying the factory frame crossmember is bent? I have a stock one if you need a replacement. otherwise, the offroad design one is a nice piece.

[Codyweber]

Originally Posted by v30crewcab

are you saying the factory frame crossmember is bent? I have a stock one if you need a replacement. otherwise, the offroad design one is a nice piece.

The one I have at this moment is the “horseshoe mount” it is bolted to the frame and engine right under the harmonic balancer. And my old Bell housing is the rear motor mount. There isn’t a crossmember where the normal engine mounts mount to the side of the block. I got a different transmission and transfer case to replace the old one. Do you happen to have a link to the crossmember you are referring to?

[Codyweber]

https://67-72chevytrucks.com/vboard/...d.php?t=844603

This is a link to an earlier post about my truck

[adf5565]

Originally Posted by Codyweber

The one I have at this moment is the “horseshoe mount” it is bolted to the frame and engine right under the harmonic balancer. And my old Bell housing is the rear motor mount. There isn’t a crossmember where the normal engine mounts mount to the side of the block. I got a different transmission and transfer case to replace the old one. Do you happen to have a link to the crossmember you are referring to?

https://www.offroaddesign.com/combin...ossmember.html

There’s ones for big block and LS too.