VA Buckets/console/tilt/rad support/big block brackets/ A/Cparts / T3 headlights - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 01-24-2010, 11:02 PM

LOWER PRICES AND UPDATED WITH WHAT'S LEFT

Pics added for BB brackets/pulleys lower down in thread...

Please respond in thread...if someone pm's me and another person posts in the thread later the person who posted in the thread gets it.

I will have most of the parts as of tomorrow or Tuesday and can take pictures then.

Price is without shipping unless noted. I will ship. Also note I will be listing these items on craigslist and ebay as I need to recoup the cost of the project asap...

Bucket seats and console with good foam and bracket and great stock condition console 650 plus shipping

Under dash A/C setup w/ pulleys and compressor/condenser (don't know if it works) SOLD

72 under dash complete wiring harness with A/C includes fuse block and motor side of fuse block $75 shipped

A/C battery box $60 shipped

Very nice rust free 69-72 radiator support $175 picked up or 200 plus shipping (have to box it up).
Also have a new one in the box aftermarket for $225 plus shipping

all big block brackets- a/c, alternator and power steering brackets, big block specific pulleys (two crank and two ps so you can choose your setup), and motor mounts on 73-up frame mounts for BB. Also includes the specific T400 bracket for the shifter. Includes the PS pump with reservoir. Everything you need to install a big block in your truck all together in one package 700 plus shipping

650 for seats and console plus shiping

73-up powder coated big block motor mounts 125

Big Block Brackets
Complete p/s setup (pump (no dents), reservoir, pulley, brackets) - $225
a/c 9-bracket setup - $275
alt brackets - $125
all 3 pulleys - $100

Or package deal for 700 for all of the big block stuff including the BB motor mounts an the specific T400 shift linkage part SHIPPED!

T400 yoke on 2 piece driveshaft 250 no shipping

Used brake booster and master cylinder with brackets (Two total... 1/2 ton) $50 plus shipping each

Used 3/4 ton setup with bracket, booster, master, and prop valve for discs 125 plus shipping.

70LonghornCST · 01-24-2010, 11:13 PM

Interested in the Used T-3 head lamps with buckets. Do they work? Do I need the buckets that you have with them? I have the original buckets on my truck.

Price shipped to 95326 please.

*sharpie1972* · 01-24-2010, 11:23 PM

Big block brackets pending pricing. Thanks, Sharpie

powell72 · 01-24-2010, 11:26 PM

I would be interested in the underdash harness pending price and condition.

VA72C10 · 01-24-2010, 11:37 PM

I have a couple sets of these...I'll try and get them tested in the next few days...I'd assume they work with std buckets and I'll verify that.

68lowburb · 01-25-2010, 12:00 AM

interested in big block brkts pending pics and place in line

VA72C10 · 01-25-2010, 12:02 AM

Quote:

Originally Posted by 68lowburb

interested in big block brkts pending pics and place in line

I am working on pricing...you'd be second in line right now.

Duncan and son · 01-25-2010, 12:04 AM

Camtoys1 had an NOS inner grille, will that be for sale? If so I am interested. Paul

VA72C10 · 01-25-2010, 12:08 AM

yes, it's in another thread...I'll put you first in line...I'm still researching all the prices to find fair prices...

Blue_71 · 01-25-2010, 12:23 AM

id be interested in the underdash air, pending pics and price. i want to see if it will fit in a 4 speed 4wd truck or if it will hit my shifters. i have a compressor and brackets and all, so mainly what i need is the actual unit that goes under the dash

thanks!

VA72C10 · 01-25-2010, 12:34 AM

Quote:

Originally Posted by Blue_71

id be interested in the underdash air, pending pics and price. i want to see if it will fit in a 4 speed 4wd truck or if it will hit my shifters. i have a compressor and brackets and all, so mainly what i need is the actual unit that goes under the dash

thanks!

I'll get pictures for you in the next day or two and take a couple quick measurements. Believe there is a 4 spd shifter in the cab currently.

novafrog · 01-25-2010, 07:13 AM

interested in some under hood a/c parts thanks

bowtietruknut · 01-25-2010, 07:23 AM

i need 1 T-3 headlight price and shipping to 35950

VA72C10 · 01-25-2010, 10:40 AM

Quote:

Originally Posted by novafrog

interested in some under hood a/c parts thanks

Quote:

Originally Posted by bowtietruknut

i need 1 T-3 headlight price and shipping to 35950

will get pics and prices of A/C parts and verify how many working T-3 lights I have. thanks.

VA72C10 · 01-25-2010, 08:57 PM

Quote:

Originally Posted by sharpie1972

Big block brackets pending pricing. Thanks, Sharpie

I have all of the brackets and pulleys including everything for A/C and the big block motor mounts. Mike said I should ask 1000 plus shipping for everything because he paid more than that for everything so that is where I'm going to start....going to lay it all out and take pictures....let me know if you're interested in everything or if you're just needing brackets...

may part if it all doesn't sell together....

VA72C10 · 01-25-2010, 08:58 PM

Quote:

Originally Posted by 70LonghornCST

Interested in the Used T-3 head lamps with buckets. Do they work? Do I need the buckets that you have with them? I have the original buckets on my truck.

Price shipped to 95326 please.

Tested the T3 lights and they worked...will post pricing later....

*sharpie1972* · 01-25-2010, 09:06 PM

Out on Big Block bracketry etc. @ $1000. Thanks for getting back on prices, good luck with your sales. Sharpie

70LonghornCST · 01-25-2010, 09:41 PM

Quote:

Originally Posted by VA72C10

Tested the T3 lights and they worked...will post pricing later....

Thanks! I will stay 1st in line pending price shipped to 95357. Let me know on the NOS AC vent, tailgate bumpers.

VA72C10 · 01-26-2010, 12:23 AM

Here's the big block motor mounts with frame brackets....

VA72C10 · 01-26-2010, 12:27 AM

Under dash Air....was all working when he took it off

york compressor for the underdash air

drier and lines (lines look like they should be replaced)

Blue_71 · 01-26-2010, 01:02 AM

that will fit in mine; how much for the underdash unit and the lines? i dont really need the compressor. any trades?

VA72C10 · 01-26-2010, 02:22 AM

Quote:

Originally Posted by Blue_71

that will fit in mine; how much for the underdash unit and the lines? i dont really need the compressor. any trades?

What do you have for trades? Do you want the drier also? I haven't had a chance to look up the model number and prices range so a trade might work...

1956cameo · 01-26-2010, 02:29 AM

Interested in the tilt column. It's for a automatic right? Couldn't remember what you told me. Could you give me a shipping quote to 77584. Thanks.

VA72C10 · 01-26-2010, 02:56 AM

Quote:

Originally Posted by 1956cameo

Interested in the tilt column. It's for a automatic right? Couldn't remember what you told me. Could you give me a shipping quote to 77584. Thanks.

It is an auto. I'll do 230 shipped and take care of anything over the $30 shipping. I will insure it for 250.

1958 FLEETSIDE · 01-26-2010, 03:04 AM

How much for big block brkts, plus shipping to 79120,thanks

01-24-2010, 11:02 PM	#1
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Buckets/console/tilt/rad support/big block brackets/ A/Cparts / T3 headlights LOWER PRICES AND UPDATED WITH WHAT'S LEFT Pics added for BB brackets/pulleys lower down in thread... Please respond in thread...if someone pm's me and another person posts in the thread later the person who posted in the thread gets it. I will have most of the parts as of tomorrow or Tuesday and can take pictures then. Price is without shipping unless noted. I will ship. Also note I will be listing these items on craigslist and ebay as I need to recoup the cost of the project asap... Bucket seats and console with good foam and bracket and great stock condition console 650 plus shipping Under dash A/C setup w/ pulleys and compressor/condenser (don't know if it works) SOLD 72 under dash complete wiring harness with A/C includes fuse block and motor side of fuse block $75 shipped A/C battery box $60 shipped Very nice rust free 69-72 radiator support $175 picked up or 200 plus shipping (have to box it up). Also have a new one in the box aftermarket for $225 plus shipping all big block brackets- a/c, alternator and power steering brackets, big block specific pulleys (two crank and two ps so you can choose your setup), and motor mounts on 73-up frame mounts for BB. Also includes the specific T400 bracket for the shifter. Includes the PS pump with reservoir. Everything you need to install a big block in your truck all together in one package 700 plus shipping 650 for seats and console plus shiping 73-up powder coated big block motor mounts 125 Big Block Brackets Complete p/s setup (pump (no dents), reservoir, pulley, brackets) - $225 a/c 9-bracket setup - $275 alt brackets - $125 all 3 pulleys - $100 Or package deal for 700 for all of the big block stuff including the BB motor mounts an the specific T400 shift linkage part SHIPPED! T400 yoke on 2 piece driveshaft 250 no shipping Used brake booster and master cylinder with brackets (Two total... 1/2 ton) $50 plus shipping each Used 3/4 ton setup with bracket, booster, master, and prop valve for discs 125 plus shipping. __________________ Looking for a 67-72 swb or blazer project in or around VA. Last edited by VA72C10; 03-17-2010 at 12:33 AM.

01-24-2010, 11:13 PM	#2
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: Buckets/console/tilt/rad support/big block brackets/ A/Cparts / T3 headlights Interested in the Used T-3 head lamps with buckets. Do they work? Do I need the buckets that you have with them? I have the original buckets on my truck. Price shipped to 95326 please. __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

01-24-2010, 11:23 PM	#3
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Buckets/console/tilt/rad support/big block brackets/ A/Cparts / T3 headlights Big block brackets pending pricing. Thanks, Sharpie

01-24-2010, 11:26 PM	#4
powell72 Senior Member Join Date: Jan 2005 Location: Loveland Co. Posts: 3,098	Re: Buckets/console/tilt/rad support/big block brackets/ A/Cparts / T3 headlights I would be interested in the underdash harness pending price and condition. __________________ Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html

01-24-2010, 11:37 PM	#5
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Buckets/console/tilt/rad support/big block brackets/ A/Cparts / T3 headlights I have a couple sets of these...I'll try and get them tested in the next few days...I'd assume they work with std buckets and I'll verify that. __________________ Looking for a 67-72 swb or blazer project in or around VA.

01-25-2010, 12:00 AM	#6
68lowburb Registered User Join Date: Sep 2006 Location: prairieville, louisiana Posts: 883	Re: Buckets/console/tilt/rad support/big block brackets/ A/Cparts / T3 headlights interested in big block brkts pending pics and place in line

01-25-2010, 12:04 AM	#8
Duncan and son Registered User Join Date: Sep 2009 Location: Lubbock Texas Posts: 1,049	Re: Buckets/console/tilt/rad support/big block brackets/ A/Cparts / T3 headlights Camtoys1 had an NOS inner grille, will that be for sale? If so I am interested. Paul __________________ You can shear a sheep every year, but you can only skin it once The person dealing with facts is never at the mercy of the person dealing with theory 1972 Cheyenne Super 402 400 A/c bucket seat tilt custom camper Longhorn 1975 Silverado 454 Crew cab camper special dually

01-25-2010, 12:08 AM	#9
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Buckets/console/tilt/rad support/big block brackets/ A/Cparts / T3 headlights yes, it's in another thread...I'll put you first in line...I'm still researching all the prices to find fair prices... __________________ Looking for a 67-72 swb or blazer project in or around VA.

01-25-2010, 07:13 AM	#12
novafrog Registered User Join Date: Apr 2009 Location: dunlow wv Posts: 435	Re: Buckets/console/tilt/rad support/big block brackets/ A/Cparts / T3 headlights interested in some under hood a/c parts thanks

01-25-2010, 07:23 AM	#13
bowtietruknut Registered User Join Date: Sep 2009 Location: Albertville Al. Posts: 45	Re: Buckets/console/tilt/rad support/big block brackets/ A/Cparts / T3 headlights i need 1 T-3 headlight price and shipping to 35950

01-25-2010, 09:06 PM	#17
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Buckets/console/tilt/rad support/big block brackets/ A/Cparts / T3 headlights Out on Big Block bracketry etc. @ $1000. Thanks for getting back on prices, good luck with your sales. Sharpie Last edited by sharpie1972; 01-25-2010 at 09:07 PM.

01-26-2010, 12:23 AM	#19
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Buckets/console/tilt/rad support/big block brackets/ A/Cparts / T3 headlights Here's the big block motor mounts with frame brackets.... __________________ Looking for a 67-72 swb or blazer project in or around VA.

01-26-2010, 12:27 AM	#20
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Buckets/console/tilt/rad support/big block brackets/ A/Cparts / T3 headlights Under dash Air....was all working when he took it off york compressor for the underdash air drier and lines (lines look like they should be replaced) __________________ Looking for a 67-72 swb or blazer project in or around VA.

01-26-2010, 02:29 AM	#23
1956cameo Registered User Join Date: Apr 2008 Location: Angleton, TX Posts: 2,219	Re: Buckets/console/tilt/rad support/big block brackets/ A/Cparts / T3 headlights Interested in the tilt column. It's for a automatic right? Couldn't remember what you told me. Could you give me a shipping quote to 77584. Thanks. __________________ I don't always drive trucks; but when I do I prefer Chevy's. Stay driving my friends. '72 blazer 2wd build 67-72 Factory Big Block Registry

01-26-2010, 03:04 AM	#25
1958 FLEETSIDE RUNNING OUT OF TIME Join Date: Jan 2010 Location: AMARILLO,TEXAS Posts: 53	Re: Buckets/console/tilt/rad support/big block brackets/ A/Cparts / T3 headlights How much for big block brkts, plus shipping to 79120,thanks __________________ 1958 CHEVY SWBFLEETSIDE 1971 CHEVY SWB 1968 CHEVY SWB 1962 INTERNATINAL 1978 CHEVY SWB STEPSIDE -SOLD- 2003 CHEVY Z-71 2010 ESCALADE (WIFE'S)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.