MO Wtb factory cruise control - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**WETOWM** · 11-30-2011, 10:05 PM

Looking for a complete factory cruise control for a 70 chevy automatic thanks for any leads . Thanks rich

Cheyenne Dan · 11-30-2011, 11:44 PM

Hi Rich, I may have what you're looking for. I removed it a couple of years ago off a 69 or 70 I parted out. My camera is not working right now but I can email you some pictures from my phone if you'll pm me your email address. Thanks, Dan
Posted via Mobile Device

Critterman71 · 12-01-2011, 09:31 PM

Hey WETOWM if Cheyenne Dan does not have what you need I have a COMPLETE NOS cruise control set up Factory GM trucks with all mounting brackets and Hardware.

**WETOWM** · 12-01-2011, 10:54 PM

Ok you got my attention ! Any chance you could send me some pictures also it is a complete unit and at what cost ? Thanks rich ...

**WETOWM** · 12-03-2011, 12:06 AM

Ttt

HeavyMetalChevy · 12-03-2011, 12:33 AM

Quote:

Originally Posted by WETOWM

Ttt

I have a thread on this... Dana Corp Original Cruise box with lever

HeavyMetalChevy · 12-03-2011, 12:34 AM

http://67-72chevytrucks.com/vboard/s...d.php?t=495493

**WETOWM** · 12-03-2011, 10:08 AM

Daune, thanks for the reply but what i am realy looking for is a original factory installed cruise control for my 70 i have had i lot of guys say they have one but as of yet all of them are for later models trucks not the early style !! Not in a big hurry i guess i will find one someday ?? Thanks ps let me know about the other parts ?

**jaros44sr** · 12-03-2011, 10:33 AM

I bought mine from roger koops, lives in the mid west, rebuilds them himself. Costs between 400 and 500. If you need info., ill have to check my old emails, lmk

**WETOWM** · 12-03-2011, 11:06 AM

Sure , i am intrested in any leads thanks rich ...

Critterman71 · 12-03-2011, 11:33 AM

Bought one from Roger for a customers truck it was nice completely refurb to GM specs wire harness was remade to look close as possible but price was no were near 500.00 it was 700.00 with the dash switch for a 72 and a little less for the turn signal switch for a 71 and it is not a true 71 truck switch it is all that is out there as the 71 truck switch with the chrome ends are LONG gone. Quality of the units he has is best I have seen next to NOS but pricey.

Critterman71 · 12-03-2011, 11:35 AM

I have Rogers info if needed he is in Shawnee Kansas let me know and I will send it to you.

71 super · 12-03-2011, 06:58 PM

I have three 68-70 units, The one I am willing to sell has the wrong (technically) control stalk - it has ribs along the stalk so i assume it is for buick/olds of same era. The rest of the parts with exception of the throttle arm clip are there including the vacuum break and break switch, cables etc. I have been sitting on these, but will sell the one mentioned for $600 shipped. I will post pictures if interested. Harold

**jaros44sr** · 12-03-2011, 07:35 PM

Quote:

Originally Posted by Critterman71

Bought one from Roger for a customers truck it was nice completely refurb to GM specs wire harness was remade to look close as possible but price was no were near 500.00 it was 700.00 with the dash switch for a 72 and a little less for the turn signal switch for a 71 and it is not a true 71 truck switch it is all that is out there as the 71 truck switch with the chrome ends are LONG gone. Quality of the units he has is best I have seen next to NOS but pricey.

Wow, i cant believe i paid much

whats acouple hundred amongst friends

I am really happy with his products, plus he is fun guy just to talk to about cars

**WETOWM** · 12-06-2011, 12:24 AM

Ttt

**WETOWM** · 12-06-2011, 10:40 PM

Ttt

**72peace** · 12-09-2011, 12:23 PM

I may have a line on one, I recently picked a 72 Cheyenne that has the cruise with the turn signal switch, but I'm not sure it's complete and it's about a 40 mile trek into IOWA, I'll see if I can get out there this weekend to take some photos. No gay-ron-tea but I'll see what I can do, weather dependent.

Cheers,

71 super · 12-09-2011, 09:40 PM

Did you look at the pictures I posted for you the other day? I had not heard from you so I can assume you are not interested?

**72peace** · 12-10-2011, 06:42 PM

Sorry, not trying to cut in line for the sale. I hadn't seen any action on this for a while and thought I'd throw it out there.

Cheers,

11-30-2011, 10:05 PM	#1
WETOWM Senior Member Join Date: Jun 2011 Location: ST LOUIS MO Posts: 2,113	Wtb factory cruise control Looking for a complete factory cruise control for a 70 chevy automatic thanks for any leads . Thanks rich

11-30-2011, 11:44 PM	#2
Cheyenne Dan Registered User Join Date: Oct 2005 Location: Millington Tennessee Posts: 200	Re: Wtb factory cruise control Hi Rich, I may have what you're looking for. I removed it a couple of years ago off a 69 or 70 I parted out. My camera is not working right now but I can email you some pictures from my phone if you'll pm me your email address. Thanks, Dan Posted via Mobile Device

12-01-2011, 09:31 PM	#3
Critterman71 Registered User Join Date: Nov 2008 Location: Lansing Mi Posts: 642	Re: Wtb factory cruise control Hey WETOWM if Cheyenne Dan does not have what you need I have a COMPLETE NOS cruise control set up Factory GM trucks with all mounting brackets and Hardware.

12-01-2011, 10:54 PM	#4
WETOWM Senior Member Join Date: Jun 2011 Location: ST LOUIS MO Posts: 2,113	Re: Wtb factory cruise control Ok you got my attention ! Any chance you could send me some pictures also it is a complete unit and at what cost ? Thanks rich ...

12-03-2011, 12:06 AM	#5
WETOWM Senior Member Join Date: Jun 2011 Location: ST LOUIS MO Posts: 2,113	Re: Wtb factory cruise control Ttt

12-03-2011, 12:34 AM	#7
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Wtb factory cruise control http://67-72chevytrucks.com/vboard/s...d.php?t=495493 __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

12-03-2011, 10:08 AM	#8
WETOWM Senior Member Join Date: Jun 2011 Location: ST LOUIS MO Posts: 2,113	Re: Wtb factory cruise control Daune, thanks for the reply but what i am realy looking for is a original factory installed cruise control for my 70 i have had i lot of guys say they have one but as of yet all of them are for later models trucks not the early style !! Not in a big hurry i guess i will find one someday ?? Thanks ps let me know about the other parts ?

12-03-2011, 10:33 AM	#9
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,592	Re: Wtb factory cruise control I bought mine from roger koops, lives in the mid west, rebuilds them himself. Costs between 400 and 500. If you need info., ill have to check my old emails, lmk __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

12-03-2011, 11:06 AM	#10
WETOWM Senior Member Join Date: Jun 2011 Location: ST LOUIS MO Posts: 2,113	Re: Wtb factory cruise control Sure , i am intrested in any leads thanks rich ...

12-03-2011, 11:33 AM	#11
Critterman71 Registered User Join Date: Nov 2008 Location: Lansing Mi Posts: 642	Re: Wtb factory cruise control Bought one from Roger for a customers truck it was nice completely refurb to GM specs wire harness was remade to look close as possible but price was no were near 500.00 it was 700.00 with the dash switch for a 72 and a little less for the turn signal switch for a 71 and it is not a true 71 truck switch it is all that is out there as the 71 truck switch with the chrome ends are LONG gone. Quality of the units he has is best I have seen next to NOS but pricey.

12-03-2011, 11:35 AM	#12
Critterman71 Registered User Join Date: Nov 2008 Location: Lansing Mi Posts: 642	Re: Wtb factory cruise control I have Rogers info if needed he is in Shawnee Kansas let me know and I will send it to you.

12-03-2011, 06:58 PM	#13
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,079	Re: Wtb factory cruise control I have three 68-70 units, The one I am willing to sell has the wrong (technically) control stalk - it has ribs along the stalk so i assume it is for buick/olds of same era. The rest of the parts with exception of the throttle arm clip are there including the vacuum break and break switch, cables etc. I have been sitting on these, but will sell the one mentioned for $600 shipped. I will post pictures if interested. Harold __________________ 67 blue step side- bb 68 gold and white swb cst anniversary 68 custom swb hot rod Ls swap 69 swb cst 6 cylinder/ overdrive 69 black/black cst bb swb 70 orange and white cst Canada built truck swb bb 71 black and white super swb bb 71 red and white super swb 72 green and white super swb 4x4 62 nova wagon 400 series Ls swapped 68 Camaro 327/4 speed- 1 owner, original paint 66 Volkswagen bettle 69 auto stick Volkswagen Beetle

12-06-2011, 12:24 AM	#15
WETOWM Senior Member Join Date: Jun 2011 Location: ST LOUIS MO Posts: 2,113	Re: Wtb factory cruise control Ttt

12-06-2011, 10:40 PM	#16
WETOWM Senior Member Join Date: Jun 2011 Location: ST LOUIS MO Posts: 2,113	Re: Wtb factory cruise control Ttt

12-09-2011, 12:23 PM	#17
72peace Senior Member Join Date: Jan 2011 Location: Bellevue, NE Posts: 712	Re: Wtb factory cruise control I may have a line on one, I recently picked a 72 Cheyenne that has the cruise with the turn signal switch, but I'm not sure it's complete and it's about a 40 mile trek into IOWA, I'll see if I can get out there this weekend to take some photos. No gay-ron-tea but I'll see what I can do, weather dependent. Cheers,



Register or Log In To remove these advertisements.

12-09-2011, 09:40 PM	#18
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,079	Re: Wtb factory cruise control Did you look at the pictures I posted for you the other day? I had not heard from you so I can assume you are not interested? Attached Images __________________ 67 blue step side- bb 68 gold and white swb cst anniversary 68 custom swb hot rod Ls swap 69 swb cst 6 cylinder/ overdrive 69 black/black cst bb swb 70 orange and white cst Canada built truck swb bb 71 black and white super swb bb 71 red and white super swb 72 green and white super swb 4x4 62 nova wagon 400 series Ls swapped 68 Camaro 327/4 speed- 1 owner, original paint 66 Volkswagen bettle 69 auto stick Volkswagen Beetle

12-10-2011, 06:42 PM	#19
72peace Senior Member Join Date: Jan 2011 Location: Bellevue, NE Posts: 712	Re: Wtb factory cruise control Sorry, not trying to cut in line for the sale. I hadn't seen any action on this for a while and thought I'd throw it out there. Cheers, Last edited by 72peace; 12-10-2011 at 11:47 PM.

Register or Log In To remove these advertisements.