|
05-29-2018, 05:09 AM
|
#1 |
|
Registered User
Join Date: Aug 2016
Location: Plantation, Fl
Posts: 357
|
Cab doors
Hey guy's can anyone help me understand why I have slam my doors so hard for them to close after installing new rubber door seal and new door bumpers. before installing the new rubber door seal the doors closed ever so easy. Are they normally hard to close after installing new rubbers? Did I install them incorrectly? I really have to slam the doors very hard now to closed them. Do I need to leave the doors closed for a few days against the new rubbers will they form into the right position? any help would be great.
Last edited by hdixon; 05-29-2018 at 05:16 AM. |
|
|
|
05-29-2018, 06:49 AM
|
#2 |
|
Registered User
 Join Date: Feb 2012
Location: Vinton, Va.
Posts: 473
|
Re: Cab doors
This seems to be a common issue. Most just leave truck in sun wiith doors closed for a few days. This seems to help. Problem should go away or at least be tolerable after some time. Nothing you did wrong. I am getting ready to install new seals and will use some made by "soft seal". Some here say problem is at least much less with this brand. I'll post my results soon.
__________________
"You are not forgotten" USMC 75-79 (Aviation Ordnance Tech- F-4 Phantom) 1959 H-D Panhead. Owned since 1978. Currently with son in Lawton, OK. 1968 Chevy Custom SWB pick up. Fleetside. Lowered 4/6. Totally refurbished. 1966 Pontiac GTO. 4 speed. Saved original 389. Now has slightly built 455 engine. 355 rear gears. Very fun to drive ! |
|
|
|
|
05-29-2018, 07:08 AM
|
#3 |
|
Registered User
Join Date: Feb 2016
Location: Trenton,Ontario & South Carolina
Posts: 755
|
Re: Cab doors
Just put new ones on mine, same thing,they will soften up in time,I also moved my strikers out a little bit,worked really good.
|
|
|
|
|
05-29-2018, 10:13 AM
|
#4 |
|
The Older Generation
  
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,389
|
Re: Cab doors
-
Like Redneck said you can move the striker plates out a little bit. Mark around them with a fine felt tip marker so you can tell how much you have moved them and move them out about 1/16 inch at a time. Don't let them move up or down, just out. LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
|
|
|
|
05-29-2018, 12:12 PM
|
#5 |
|
Registered User
Join Date: Aug 2016
Location: Plantation, Fl
Posts: 357
|
Re: Cab doors
thanks everyone for all you help I will give it a try and reply on the results
|
|
|
|
|
05-29-2018, 01:15 PM
|
#6 |
|
*************
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,837
|
Re: Cab doors
A little ArmorAll on the seals and door edge help too...
__________________
Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 |
|
|
|
|
05-29-2018, 01:26 PM
|
#7 | |
|
Registered User
Join Date: Aug 2016
Location: Plantation, Fl
Posts: 357
|
Re: Cab doors
Quote:
|
|
|
|
|
|
05-29-2018, 05:42 PM
|
#8 |
|
Florida Edition
Join Date: Oct 2010
Location: Fruitland Park, FL
Posts: 4,021
|
Re: Cab doors
I basically just took a 2x4 and hammer and bent the pinch weld in a bit. This was before I put the vinyl on. Took some overall tweeking but doors close and seal good. I probably spent 8 hrs on each door to get them right so it takes some patience.
__________________
70 GMC Short Stepside "Rose"-An American Beauty: Factory 402/TH400, AM/FM, AC, Tilt, Tach, Buckets, Posi, PS, PB, 3-5 Drop, Complete Resto-Rod 67 C-20 Slant Back Wrecker "Mad Max" 67 C-10 Ratrod "Step-N-Wolf" 71 Serro Scotty Sportsman camper "Scotty" 97 LT1 Z28 "The Hornet" Link to more pics of "Rose" http://67-72chevytrucks.com/vboard/a...p?albumid=1684 Check out my "Cheap Tricks" thread and add to it if you can, lots of good info there. http://67-72chevytrucks.com/vboard/s...d.php?t=489394 |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
