Rear coils on a 1969 c10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**RonWT** · 10-02-2023, 11:05 PM

guys, we have a 69 CST10 with rear coil springs, and would like to replace with some that will raise the back end up a bit and firm it up a bit. What has been your experiences related to this?

Thank you,

RonWT

SCOTI · 10-03-2023, 08:41 AM

Quote:

Originally Posted by RonWT

guys, we have a 69 CST10 with rear coil springs, and would like to replace with some that will raise the back end up a bit and firm it up a bit. What has been your experiences related to this?

Thank you,

RonWT

Rear coils spec'd for a C20 would be my first choice. And, if it doesn't feel firm, I'd be looking for shocks as well.

LS short box · 10-03-2023, 04:25 PM

On my 68 with coil springs it sat a bit low so went to the local metal store and had them cut me 1"? spacers out of 4"? steel bar stock. Drilled a hole in the middle and bolted them in.
You can have the spacer cut any thickness you need. I think they charged me $40 for both.

10-02-2023, 11:05 PM	#1
RonWT Active Member Join Date: Jun 2023 Location: Cottonwood Ca Posts: 142	Rear coils on a 1969 c10 guys, we have a 69 CST10 with rear coil springs, and would like to replace with some that will raise the back end up a bit and firm it up a bit. What has been your experiences related to this? Thank you, RonWT

10-03-2023, 04:25 PM	#3
LS short box Registered User Join Date: Jun 2015 Location: Carlos MN Posts: 2,109	Re: Rear coils on a 1969 c10 On my 68 with coil springs it sat a bit low so went to the local metal store and had them cut me 1"? spacers out of 4"? steel bar stock. Drilled a hole in the middle and bolted them in. You can have the spacer cut any thickness you need. I think they charged me $40 for both.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.