Lokar Auto Shifter & switch to trade

[70GMCer]

Here's a Lokar shifter linkage part #ACA-1800 & a Lokar backup/neutral safety switch part #BL-1400U. These parts where on my 70 and are setup for a sbc with 350 turbo trans setting in the V8 place on the frame. I only have around 200 miles on the shifter linkage & have never wired up the switch. The switch was just mounted on the transmission pan. All parts look like new except where nuts have made contact with washers & shifter arm.

Keep in mine that the switch can only be used for either backup lights, or neutral safety switch. You can't do both at the same time.

I have a copy of the installation instructions for the shifter linkage, but not the switch. Easy though. All you do is 2 bolts to the pan & the switch lever makes contact with the shifter lever at the trans.

I'm looking for a trade first before I sell these. I'm looking for a Holley 600 cfm, list #1850, "Base Plate" with "Vacuum Secondary, or equivalent, (no Double Pumper plate) & 2 bare, dual line float bowls, (center float). Plate must be in nice shape & without excessive shaft play or modifications.

Please respond to thread....