Looking for this rear brake kit ... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**KyleSeal** · 08-07-2016, 10:47 PM

Read this article on differentials and towards the end he works on a 12 bolt '67 C10 and adds a CPP kit that has Cadillac calipers with built in parking brake adapters. I cannot find this kit nor the bracket on their site. Does anyone know where this kit may be found?

http://www.chevydiy.com/how-to-disas...-step-by-step/

Andy4639 · 08-08-2016, 03:29 AM

Those look like the CCP rear brakes I have with e brake.
This thread has my install and several others.

http://67-72chevytrucks.com/vboard/s...=572063&page=2

**KyleSeal** · 08-08-2016, 11:01 PM

Can I do the 1991 K1500 rotor with the Caddy calipers on a 15 inch rim?

08-07-2016, 10:47 PM	#1
KyleSeal Senior Member Join Date: Mar 2014 Location: Toano, VA Posts: 884	Looking for this rear brake kit ... Read this article on differentials and towards the end he works on a 12 bolt '67 C10 and adds a CPP kit that has Cadillac calipers with built in parking brake adapters. I cannot find this kit nor the bracket on their site. Does anyone know where this kit may be found? http://www.chevydiy.com/how-to-disas...-step-by-step/ __________________ "Sometimes I do serve as a good bad example. Glad to be of service." My Build Thread (1967 C10, lowered, EFI, daily truck): http://67-72chevytrucks.com/vboard/s...d.php?t=830809

08-08-2016, 03:29 AM	#2
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Looking for this rear brake kit ... Those look like the CCP rear brakes I have with e brake. This thread has my install and several others. http://67-72chevytrucks.com/vboard/s...=572063&page=2 __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

08-08-2016, 11:01 PM	#3
KyleSeal Senior Member Join Date: Mar 2014 Location: Toano, VA Posts: 884	Re: Looking for this rear brake kit ... Can I do the 1991 K1500 rotor with the Caddy calipers on a 15 inch rim? __________________ "Sometimes I do serve as a good bad example. Glad to be of service." My Build Thread (1967 C10, lowered, EFI, daily truck): http://67-72chevytrucks.com/vboard/s...d.php?t=830809



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.