cab mounts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hippie-46 · 12-21-2009, 07:27 AM

bought new cab mounts old ones rotted . there are two 1" and two 1 1/8" which one is front and which one is rear . did not come with instructions. thanks for any help.

Hellbent · 12-21-2009, 09:55 AM

Take all look at this thread, it might help you.
http://67-72chevytrucks.com/vboard/s...d.php?t=192342

msgross · 12-21-2009, 10:01 AM

LMC catalog is great for it's illustrations as well..

i'm guessing taller in the back.

longhorn70gmc · 12-22-2009, 03:05 AM

Thanks for the heads up on doing this process.

hippie-46 · 12-22-2009, 06:51 AM

thank for all the help i did see that thead was some help but dont show which is front or back.. they sent washers that dont fit the bolts but i have a drill. thank to my air chisel bolt came out easy .

longhorn70gmc · 12-25-2009, 01:33 AM

Got to ask this;
Do any of you know what kind of bolts, nuts and washers are needed for 3/4 ton. My new set did not come with hardware and I am not seeing any identification in any of the books for what type and size all of the hardware needs to be. I thought about using the old ones to compare, but I don't know how well they will come off when that time comes. Thanks all.
R/

billdo · 01-08-2010, 08:42 PM

can some one tell me thje lenghts and size of the cab bolts and does the larger bushing go to the rear?

MESS-HALL · 01-08-2010, 09:23 PM

Quote:

Originally Posted by Hellbent

Take all look at this thread, it might help you.
http://67-72chevytrucks.com/vboard/s...d.php?t=192342

What he said.

billdo · 01-09-2010, 12:22 AM

there is nothing mentioned about length or size of bolt

mike16 · 01-09-2010, 12:51 AM

good post. I'm thinkin about doin mine and this is a nice heads up!!!

hippie-46 · 01-09-2010, 08:45 AM

someone told me the bigger bushing goes to the rear thats what i did . i also sprayed my bolts with pb blast they come right off had to use my air chisel to remove bolt out of the floor go slow so you dont tear the floor up.my bushings came with new bolts and nuts with washers. if i go out today i will try to remember to see what size and how long.

COACHMEASON · 01-09-2010, 01:03 PM

Good info..

billdo · 01-09-2010, 10:13 PM

that would be greatly appreciated mine only came bushings and washers from performance online

usmcchevy · 01-09-2010, 10:51 PM

Front 9/16x6"
Rear 3/8x5.5"

billdo · 01-11-2010, 02:07 AM

your to kind thank you

longhorn70gmc · 01-11-2010, 02:47 AM

Quote:

Originally Posted by usmcchevy

Front 9/16x6"
Rear 3/8x5.5"

Your the man. Thanks for posting this.
R/

12-21-2009, 07:27 AM	#1
hippie-46 Registered User Join Date: Dec 2009 Location: cincinnati ohio Posts: 28	cab mounts bought new cab mounts old ones rotted . there are two 1" and two 1 1/8" which one is front and which one is rear . did not come with instructions. thanks for any help.

12-21-2009, 09:55 AM	#2
Hellbent Don't blame the messenger Join Date: Nov 2009 Location: Summerville, SC Posts: 318	Re: cab mounts Take all look at this thread, it might help you. http://67-72chevytrucks.com/vboard/s...d.php?t=192342 __________________ On the Level Just a guy with a hammer and a grinder. OH!, and an HOA- enough said...: http://67-72chevytrucks.com/vboard/s...d.php?t=372525 "Some drink from the fountain of knowledge while others just gargle."

12-21-2009, 10:01 AM	#3
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: cab mounts LMC catalog is great for it's illustrations as well.. i'm guessing taller in the back. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

12-22-2009, 03:05 AM	#4
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: cab mounts Thanks for the heads up on doing this process. __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

12-22-2009, 06:51 AM	#5
hippie-46 Registered User Join Date: Dec 2009 Location: cincinnati ohio Posts: 28	Re: cab mounts thank for all the help i did see that thead was some help but dont show which is front or back.. they sent washers that dont fit the bolts but i have a drill. thank to my air chisel bolt came out easy .

12-25-2009, 01:33 AM	#6
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: cab mounts Got to ask this; Do any of you know what kind of bolts, nuts and washers are needed for 3/4 ton. My new set did not come with hardware and I am not seeing any identification in any of the books for what type and size all of the hardware needs to be. I thought about using the old ones to compare, but I don't know how well they will come off when that time comes. Thanks all. R/ __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

01-08-2010, 08:42 PM	#7
billdo Registered User Join Date: Oct 2007 Location: hopewell jct new york Posts: 140	Re: cab mounts can some one tell me thje lenghts and size of the cab bolts and does the larger bushing go to the rear?

01-09-2010, 12:22 AM	#9
billdo Registered User Join Date: Oct 2007 Location: hopewell jct new york Posts: 140	Re: cab mounts there is nothing mentioned about length or size of bolt

01-09-2010, 12:51 AM	#10
mike16 Registered User Join Date: Dec 2009 Location: bisbee, arizona Posts: 1,529	Re: cab mounts good post. I'm thinkin about doin mine and this is a nice heads up!!!

01-09-2010, 08:45 AM	#11
hippie-46 Registered User Join Date: Dec 2009 Location: cincinnati ohio Posts: 28	Re: cab mounts someone told me the bigger bushing goes to the rear thats what i did . i also sprayed my bolts with pb blast they come right off had to use my air chisel to remove bolt out of the floor go slow so you dont tear the floor up.my bushings came with new bolts and nuts with washers. if i go out today i will try to remember to see what size and how long.

01-09-2010, 01:03 PM	#12
COACHMEASON Keep On Keepin' On Join Date: Apr 2006 Location: Oklahoma Posts: 417	Re: cab mounts Good info.. __________________ 07 Avalanche Z71 92 Mustang 5.0 GT (Triple White w/ 53,000 miles) 72 SWB Chevy w/ PS, AC, 350/350 Current Project ....In paint shop getting body/paint work done (Corvette Velocity Yellow)... http://67-72chevytrucks.com/vboard/s...d.php?t=157669

01-09-2010, 10:13 PM	#13
billdo Registered User Join Date: Oct 2007 Location: hopewell jct new york Posts: 140	Re: cab mounts that would be greatly appreciated mine only came bushings and washers from performance online

01-09-2010, 10:51 PM	#14
usmcchevy Has more rust than truck... Join Date: Apr 2005 Location: Ivanhoe, MN Posts: 2,421	Re: cab mounts Front 9/16x6" Rear 3/8x5.5" __________________ 1972 Custom/10 SWB, 4.8/4l80e Build thread LSx Swap FAQ index

01-11-2010, 02:07 AM	#15
billdo Registered User Join Date: Oct 2007 Location: hopewell jct new york Posts: 140	Re: cab mounts your to kind thank you



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.