|
09-06-2024, 11:07 PM
|
#1 |
|
Registered User
Join Date: Sep 2020
Location: Kennewick, Wash.
Posts: 240
|
Lifters
I haven't been on in a while. Since the last time I was on, I drove my '71 to Texas and back, a 4000 mile round trip journey. I left with a "ticking" noise that I COULD NOT adjust out. After I got back home, I tore the top end apart and found 2 of the CompCams lifters had lost the retaining spring clips and when I pulled the pushrods, the lifters came apart. I am SO LUCKY they didn't come apart on the road and completely grenade my engine. I contacted Summit AND CompCams and both stated that the warranty had expired. I built the engine about a year before I actually installed it, then it was another year before it was fired. The CompCams warranty manager sent me 2 of their latest and greatest DLC (Diamond Like Coating) lifters to replace the failed lifters. I decided to rebuild the entire engine and went from .030 to .040, and a substantially bigger cam. I did some head work and chamber work on the #416 305HO heads. I used the Summit 1202 4-7 swap cam and a FULL SET of the CompCams DLC lifters. VERY happy with the new engine and the sound of the bigger cam is awesome!!! Went from a 260H single pattern to a 278- 288 dual pattern cam.
|
|
|
|
09-07-2024, 12:11 AM
|
#2 |
|
Senior Member
 
Join Date: Dec 2009
Location: TN.
Posts: 8,332
|
Re: Lifters
Great luck you have for sure.
 I have similar stories.  You have this figured out now.  That a great choice. 
__________________
________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build |
|
|
|
|
09-07-2024, 12:13 AM
|
#3 |
|
Post Whore
Join Date: Feb 2016
Location: Portland Oregon
Posts: 11,302
|
Re: Lifters
Is the 307?
Good to hear it's back together and you're happy with it.
__________________
Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help.  RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377 |
|
|
|
|
09-12-2024, 10:23 PM
|
#4 | |
|
Registered User
Join Date: Sep 2020
Location: Kennewick, Wash.
Posts: 240
|
Re: Lifters
Quote:
|
|
|
|
|
|
09-14-2024, 10:53 AM
|
#5 |
|
Post Whore
Join Date: Feb 2016
Location: Portland Oregon
Posts: 11,302
|
Re: Lifters
Nice! Have you any idea what mileage you're getting?
__________________
Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377 |
|
|
|
|
09-14-2024, 04:58 PM
|
#6 | |
|
Registered User
Join Date: Sep 2020
Location: Kennewick, Wash.
Posts: 240
|
Re: Lifters
Quote:
|
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
