|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
10-18-2016, 10:00 PM
|
#1 |
|
Registered User
Join Date: Jul 2014
Location: Elrosa MN
Posts: 6
|
12 bolt rear end pan hard bar?
Im looking at a 12 bolt posi rear end. It was from a leaf spring truck so it does not have the mount for a pan hard bar. The truck will be bagged but not laying frame. Is there some kind of bracket they make to run the pan hard bar? I have also seen a cage that bolts on the rear diff cover with two bars on it to keep the rear end centered better. Any info would help. Thanks in advance.
Also my truck is a 69 c10 with coils(bags). I do understand that i will have to weld saddles for the trailing arms. Tyler |
|
|
|
10-18-2016, 11:13 PM
|
#2 |
|
Registered User
Join Date: Feb 2006
Location: ND
Posts: 214
|
Re: 12 bolt rear end pan hard bar?
Early Classic makes a Super Track Bar that moves the axle mount to a bracket on the passenger side trailing arm. I actually just installed mine about an hour ago as I also put a leaf spring rear into my truck. They sell the saddles as well.
http://www.earlyclassic.com/catalog.aspx
__________________
1972 Chevy C-10 Cheyenne Super - Buckets, A/C, "The 17 Year Revival Project" |
|
|
|
|
10-19-2016, 07:37 PM
|
#3 |
|
the boat guy
Join Date: Jul 2007
Location: springfield mo
Posts: 2,339
|
Re: 12 bolt rear end pan hard bar?
You probably want a longer bar that mounts to the trailing arm.
__________________
67, swb, fleet, tach, throttle, 5.3, 4l60e, 3.73's, fuel cell, 5 lug, p.d.b., 4-6 drop. great little truck 66, stevens drag/ski 18' silouette, 350, 2.02 doublehump heads. comp extreme marine 278 cam, vette 7 fin valve covers, old polished edelbrock intake, velvetdrive, casale v-drive, adj cavitation plate. 28, model a rpu project, |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
