whats the best plug wires - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hjewell2 · 01-22-2016, 10:59 PM

looking for the best plug wires. currently running a solid core wire , they are getting old and need to be changed whats the best out there these days?

**PGSigns** · 01-23-2016, 12:21 AM

On the race engines we run Moroso. Use the sets that you have to cut and we build them to suit the engine header combo.
Jimmy

hjewell2 · 01-23-2016, 12:32 AM

well that's what I have now, guess the best has not changed.

GASoline71 · 01-23-2016, 10:56 AM

I use MSD Super Conductors. Cut to fit of course.

Gary

Marv D · 01-23-2016, 11:03 AM

Most ignition systems HATE solid core wires. MSD and Mallory both are specific to say warrantee void if you use a solid core wire.

For me Taylor wire kits or MSD wire kits are my 'go to' wires for most everything. I did buy one "Scott Performance" wire kit some 8 years ago and am still using them with the MSD Digital 7 (7530T box) I got a smoking deal on a hand built custom wire kit installed from a guy that was wanting to start an outlet doing nothing but ignitions. Beautiful work, EXCEPTIONAL QUALITY wires and accessories (seperators, looms fireboots etc) ,, but $ was more than most would consider 'reasonable' .

hjewell2 · 01-23-2016, 11:21 AM

well if GAS says he has had no problems with the MSD wires I should look into those. Marv.. guess I'm lost in the 70,s by using the solid core. back then if it was not solid core it was junk I need to get caught up to the late 80,s lol

71Dragtruck · 01-23-2016, 01:23 PM

I run the Taylor sleeved Thundervolt race wires with heat boots on the ends.

cableguy0 · 01-23-2016, 03:43 PM

I run Taylor cut to fits on pretty much everything. Stick with Taylor, Moroso or MSD and you should be in good shape. I only use cut to fit wires. Ignition wires that look like a rats nest drive me nuts.

GASoline71 · 01-23-2016, 05:14 PM

I do have to admit that I have used Taylor wires before and like them just as well as the MSD's.

I started using MSD wires when I started using MSD's digital ignition systems.

Gary

BossHogg69 · 01-24-2016, 08:14 PM

Performance Distributors 'Livewires' here.

01-22-2016, 10:59 PM	#1
hjewell2 Registered User Join Date: May 2011 Location: mich Posts: 655	whats the best plug wires looking for the best plug wires. currently running a solid core wire , they are getting old and need to be changed whats the best out there these days?

01-23-2016, 12:21 AM	#2
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: whats the best plug wires On the race engines we run Moroso. Use the sets that you have to cut and we build them to suit the engine header combo. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

01-23-2016, 12:32 AM	#3
hjewell2 Registered User Join Date: May 2011 Location: mich Posts: 655	Re: whats the best plug wires well that's what I have now, guess the best has not changed.

01-23-2016, 11:03 AM	#5
Marv D Registered Truck Offender Join Date: May 2008 Location: hells training ground (aka Ariz) Posts: 3,118	Re: whats the best plug wires Most ignition systems HATE solid core wires. MSD and Mallory both are specific to say warrantee void if you use a solid core wire. For me Taylor wire kits or MSD wire kits are my 'go to' wires for most everything. I did buy one "Scott Performance" wire kit some 8 years ago and am still using them with the MSD Digital 7 (7530T box) I got a smoking deal on a hand built custom wire kit installed from a guy that was wanting to start an outlet doing nothing but ignitions. Beautiful work, EXCEPTIONAL QUALITY wires and accessories (seperators, looms fireboots etc) ,, but $ was more than most would consider 'reasonable' . __________________ Still playin with trucks, even at my age! When you're dead, it's only a problem for the people around you, because you don't know you're dead. .....It's kinda the same when your STUPID. I just did my taxes and reviewed my SS statement. Thanks to the current administration it looks like I will only have to work till noon on the day of my funeral.

01-23-2016, 11:21 AM	#6
hjewell2 Registered User Join Date: May 2011 Location: mich Posts: 655	Re: whats the best plug wires well if GAS says he has had no problems with the MSD wires I should look into those. Marv.. guess I'm lost in the 70,s by using the solid core. back then if it was not solid core it was junk I need to get caught up to the late 80,s lol

01-23-2016, 01:23 PM	#7
71Dragtruck Registered User Join Date: Jun 2004 Location: Saskatchewan, Canada Posts: 1,368	Re: whats the best plug wires I run the Taylor sleeved Thundervolt race wires with heat boots on the ends. __________________ Speed is just a matter of money, question is how fast can you afford to go? 8.95@148.97mph all motor haven't tried bottle yet Sponsored by: Getz Oilfield Consulting Hard Candy Customs

01-23-2016, 03:43 PM	#8
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,950	Re: whats the best plug wires I run Taylor cut to fits on pretty much everything. Stick with Taylor, Moroso or MSD and you should be in good shape. I only use cut to fit wires. Ignition wires that look like a rats nest drive me nuts. __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.

01-24-2016, 08:14 PM	#10
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: whats the best plug wires Performance Distributors 'Livewires' here. __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.