![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Dec 2014
Location: charelston ny
Posts: 24
|
Shoulder belts in our trucks
There are a lot of threads about using the existing B pillar bolts and adding a shoulder belt (71 C10 for me). I was looking to do the belt that connects to the seat belts so you can use it either way. My muscle car in the day had that setup. Someone's reply hit home though about the fact that it's just like a seat belt and has no retraction to keep you or your loved ones from hitting the dash or breaking a bone. Also the fact that the seat belts are, in my case, 45 years old. So I'm back to the idea of aftermarket setups. BUT, I just sold a 71 Suburban that had them and they sucked in that when putting them on if you don't pull GENTLY and steadily, the belt comes to a screeching halt. Also, the retractors needed help getting the belts back in. So my question is: Is there a difference in quality between suppliers and if so which ones are best? You can't put a price on safety. Thanks.
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jan 2016
Location: Saskatchewan
Posts: 357
|
Re: Shoulder belts in our trucks
Sub'd I'd like to add shoulder straps to my '72
__________________
1972 C10 - It might be old, but it's not slow |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jan 2013
Location: Mickleton, NJ
Posts: 1,776
|
Re: Shoulder belts in our trucks
The ones I have are from Classic Parts and are just like you describe. hard to pull because they lock too easily, and don't retract well at all. Subbed because I want to know also!
__________________
Shawn 1970 Chevy C-10 SWB, 350, TKO 600 5 speed My build http://67-72chevytrucks.com/vboard/s...d.php?t=559881 |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jun 2015
Location: @
Posts: 890
|
Re: Shoulder belts in our trucks
i have seatbelt plus only once has it stuck when pulling on them ive had factory ones that were way worse I like them
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Oct 2015
Location: Lincolnshire, IL / Burlington, WI
Posts: 209
|
Re: Shoulder belts in our trucks
Bought mine from Brothers and have same issue with sticking if pulled too fast. Have learned to slow it down a bit, strap it in then fire up my 402 biggie!
__________________
1970 C-10 CST, LWB, 402/400, A/C |
![]() |
![]() |
![]() |
#6 | |
Registered User
Join Date: Jan 2016
Location: Saskatchewan
Posts: 357
|
Re: Shoulder belts in our trucks
Quote:
What size did you end up ordering they have 60", 74" & 90"? Never mind I was looking at the wrong belts.
__________________
1972 C10 - It might be old, but it's not slow |
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Feb 2016
Location: indianapolis, in
Posts: 46
|
Re: Shoulder belts in our trucks
I have a set on the way from seat belts plus so I can let you know in a few days. I haven't read anything bad about them yet.
__________________
'72 chevy C20 Cheyenne Super |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Jun 2014
Location: Orland, Nor-Cal
Posts: 617
|
Re: Shoulder belts in our trucks
Their site is kind of confusing. What shoulder belt did you order? Thanks
__________________
1972 Highlander PAC B 400BB-SOLD 1974 K5 Blazer-6.0 swap 1974 C20 Long Bed 454 1977 GMC HeavyHalf several adopted orphans |
![]() |
![]() |
![]() |
#9 | |
Registered User
Join Date: Feb 2016
Location: indianapolis, in
Posts: 46
|
Re: Shoulder belts in our trucks
Quote:
http://www.seatbeltsplus.com/product/CHT6872-Bench.html
__________________
'72 chevy C20 Cheyenne Super Last edited by boogieman1; 04-26-2016 at 08:50 AM. Reason: spelling |
|
![]() |
![]() |
![]() |
#10 | |
Registered User
![]() Join Date: Mar 2016
Location: Wylie, TX
Posts: 53
|
Re: Shoulder belts in our trucks
Quote:
|
|
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Apr 2015
Location: East Tn (In the heart of the Smoky Mtns)
Posts: 1,867
|
Re: Shoulder belts in our trucks
I currently have a set out of an 80s truck, and have had them for about 10 years, but the black fabric paint has worn off and the blue kinda clashes with my green interior. Recently I scored a set of belts out out of the parts yard, that came out of the back seat of a passenger van. I mocked them up and the mechanism works as it's supposed to. I had to modify the length of the female end, and a little mod on the high mount for the shoulder portion. They will go in when I get the time to get into my cab work. Hopefully this weekend
|
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Aug 2006
Location: Redmond, WA
Posts: 6,332
|
Re: Shoulder belts in our trucks
I have the LMC three point setup and I like them except for the part where you're putting them on, if you pull them too fast, like you say - they lock. That's a safety feature I guess but it does get old.
Once the belt is adjusted to where you need it, it's less troublesome.
__________________
1970 GMC Sierra Grande Custom Camper - Built, not Bought 1969 Pontiac 2+2 427/390 4-speed Coupe 1969 Pontiac 2+2 427/390 4-speed Convertible |
![]() |
![]() |
![]() |
#13 | |
Registered User
Join Date: Nov 2014
Location: Austin
Posts: 749
|
Re: Shoulder belts in our trucks
Quote:
|
|
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: May 2011
Location: Fort Pierce, FL
Posts: 430
|
Re: Shoulder belts in our trucks
I bought an NOS set from this site for my 72. The male end of the belt is supposed to be pushed into the rubber/plastic cover that attaches at the top. But I usually just let it hang. It's not long enough to get caught anywhere and causes no problems.
|
![]() |
![]() |
![]() |
#15 |
Registered User
Join Date: Aug 2012
Location: Midland, TX
Posts: 1,267
|
Re: Shoulder belts in our trucks
__________________
1969 RS/SS Z10 Camaro Pace coupe 1972 GMC Short Step buildhttp://67-72chevytrucks.com/vboard/s...=1#post6356218 1979 Mazda RX7 1979 Pontiac Trans Am WS6 & 1979 Pontiac Trans Am 10th Anniversary 1999 Honda Valkyrie 2006 Corvette Z06 2010 BMW 650i |
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Oct 2009
Location: canton ga
Posts: 12,728
|
Re: Shoulder belts in our trucks
I also used Morris Classic belts and like them .
|
![]() |
![]() |
![]() |
#17 |
Registered User
Join Date: Sep 2015
Location: danbury, ct.
Posts: 568
|
Re: Shoulder belts in our trucks
Just wondering... My 70 C30 Longhorn does not have shoulder belts, never did. Is it against the law to not have them?
|
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: Feb 2016
Location: indianapolis, in
Posts: 46
|
Re: Shoulder belts in our trucks
However it came from the factory is what is the minimum required by law. If it had lap belts originally then it has to have at least or more than that now. You can go more just not less.
__________________
'72 chevy C20 Cheyenne Super Last edited by boogieman1; 04-28-2016 at 07:15 AM. Reason: Spelling |
![]() |
![]() |
![]() |
#19 |
Registered User
Join Date: Jul 2014
Location: Federal Way Washington
Posts: 119
|
Re: Shoulder belts in our trucks
Those Morris Classic belts look nice, a little spendy but much better color selection. They actually have the dark brown to match a saddle interior. Very tempting. Do they lock up bad when putting them on?
__________________
Tim ![]() |
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Dec 2011
Location: Earth, NJ
Posts: 479
|
Re: Shoulder belts in our trucks
I have the Morris belts and they do lock when you pull them out, but I suspect that it may be because my retractor is at a slight angle. I just installed them as they were when I got them out of the box, but one is at a slight angle compared to level and the other is level and I think the one that is level does not have the locking problem. I haven't driven the Suburban enough to really get out there and fix it and see if that changes anything, I am still doing a bunch of other stuff to it and other projects right now.
|
![]() |
![]() |
![]() |
#21 |
Registered User
![]() Join Date: Oct 2015
Location: Dallas Texas
Posts: 1,380
|
Re: Shoulder belts in our trucks
I've been considering the Seatbelts Plus as well.
|
![]() |
![]() |
![]() |
#22 |
Registered User
Join Date: May 2013
Location: Oregon
Posts: 327
|
Re: Shoulder belts in our trucks
I'm considering the Seatbelts Plus 3 points myself. Anybody know the proper length for a middle lap belt? I have a stock bench seat now, but will probably be replacing it with a 90s bench at some point.
|
![]() |
![]() |
![]() |
#23 |
Registered User
Join Date: Oct 2009
Location: canton ga
Posts: 12,728
|
Re: Shoulder belts in our trucks
I have had no problems at all with my Morris classic belts locking up and they are Americam made and you can even talk to Mr Morris in person if you have questions .He is a member on Team Chevelle and commonly answers questions over there about their belts .Im surprised he is not a vendor here but Matt's Classic Bowtie is a vendor here and is a little less expensive than buying direct ,that is where I bought mine.He also stands behind his product after the sale if you do have questions or problems .
|
![]() |
![]() |
![]() |
Bookmarks |
|
|