L6 250/292 A/c bracket - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Grumpy old man** · 03-09-2017, 10:09 AM

I stopped in one of my local scrap yards the other day and came up with this hoard of parts , I found the stock A/C bracket / 2 groove pulley on a 67 Biscayne 4 door the power steering was already gone the 2 Chevrolet Script valve covers came from a 66 Chevelle 4 door and the 67 Biscayne .Sway bar off a long bed frame

Total cost $50.00

http://

After some clean up in my glass bead cabinet the valve covers will look great !

http://

I looked on ebay and there was one A/C bracket listed for $350.00 and the 3 shims for $40.00 from the same seller .

http://

http://

**LockDoc** · 03-09-2017, 10:36 AM

-
Looks like you did good! Just proves that stuff is still around if you go out and beat the bushes..... I just picked up a '77 Van tilt and a pretty nice '69-'70 grille surround yesterday morning.

LockDoc

**too much stuff** · 03-09-2017, 10:42 AM

Good save! We need more threads like these...

**Grumpy old man** · 03-09-2017, 10:49 AM

I looked for that A/C bracket for 2 years ,It will be going on my 292 I just bolted it to the 250 engine so it didn't get lost in the shop . I have a stack of parts 5' high sitting next to my blast cabinet waiting to be cleaned

"Just proves that stuff is still around if you go out and beat the bushes" Around here everythings already starting to turn green , once the leaves and thorns come in a lot of this stuff will be buried until fall again !

Today it will be 70 and then snow all weekend long ?

Andy4639 · 03-09-2017, 11:00 AM

A lot of the small block and 6 cylinder motor parts inter change off of cars and trucks. Most people get hung up on the truck only parts and walk right by a car with the same part on it. If you need a good alternator bracket any small block Chevy car from the 60's will have the same brackets as our trucks.

100%Chevy · 03-09-2017, 11:09 AM

That is a rare find!
You and I would get along great!
I go to the U-Pull-It so often that they seldom charge me to get in.They know I'm going to buy something!I also go to estate sales.
I have many GM brackets and pulleys in my pile.Including the one you found.
And,an NOS power steering bracket for a 250 six.
I blast parts just about everyday and will never catch up!

Mike.

03-09-2017, 10:09 AM	#1
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	L6 250/292 A/c bracket I stopped in one of my local scrap yards the other day and came up with this hoard of parts , I found the stock A/C bracket / 2 groove pulley on a 67 Biscayne 4 door the power steering was already gone the 2 Chevrolet Script valve covers came from a 66 Chevelle 4 door and the 67 Biscayne .Sway bar off a long bed frame Total cost $50.00 http:// After some clean up in my glass bead cabinet the valve covers will look great ! http:// I looked on ebay and there was one A/C bracket listed for $350.00 and the 3 shims for $40.00 from the same seller . http:// http:// Last edited by Grumpy old man; 03-09-2017 at 10:35 AM.

03-09-2017, 10:36 AM	#2
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,639	Re: L6 250/292 A/c bracket - Looks like you did good! Just proves that stuff is still around if you go out and beat the bushes..... I just picked up a '77 Van tilt and a pretty nice '69-'70 grille surround yesterday morning. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

03-09-2017, 10:42 AM	#3
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,768	Re: L6 250/292 A/c bracket Good save! We need more threads like these... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-09-2017, 10:49 AM	#4
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: L6 250/292 A/c bracket I looked for that A/C bracket for 2 years ,It will be going on my 292 I just bolted it to the 250 engine so it didn't get lost in the shop . I have a stack of parts 5' high sitting next to my blast cabinet waiting to be cleaned "Just proves that stuff is still around if you go out and beat the bushes" Around here everythings already starting to turn green , once the leaves and thorns come in a lot of this stuff will be buried until fall again ! Today it will be 70 and then snow all weekend long ? Last edited by Grumpy old man; 03-09-2017 at 11:00 AM.

03-09-2017, 11:00 AM	#5
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: L6 250/292 A/c bracket A lot of the small block and 6 cylinder motor parts inter change off of cars and trucks. Most people get hung up on the truck only parts and walk right by a car with the same part on it. If you need a good alternator bracket any small block Chevy car from the 60's will have the same brackets as our trucks. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. Last edited by Andy4639; 03-09-2017 at 11:14 AM.

03-09-2017, 11:09 AM	#6
100%Chevy Registered User Join Date: Jun 2008 Location: Moss Point,Ms. Posts: 1,439	Re: L6 250/292 A/c bracket That is a rare find! You and I would get along great! I go to the U-Pull-It so often that they seldom charge me to get in.They know I'm going to buy something!I also go to estate sales. I have many GM brackets and pulleys in my pile.Including the one you found. And,an NOS power steering bracket for a 250 six. I blast parts just about everyday and will never catch up! Mike.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.