CA 1970 Cab for Patches - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KrazyRay · 02-07-2015, 09:32 PM

Here's a non AC cab that I'm selling patch panels from. The floor, rocker, kick panel areas are bad, but the rest looks to be in good shape. Patches start at $25 plus shipping. The entire dash cut at the windshield is $75 plus shipping. Let me know what you need!
Thanks,
Ray

KrazyRay · 02-07-2015, 09:34 PM

pics

sduckworth13 · 02-07-2015, 11:03 PM

Can you cut me the passenger side cab corner please? Can you please cut it similar to how this pic is please. If there is anyway to get it apart without removing the spot welds where the rear floor is attached to the cab corner and leave just the area of metal that's attached to the cab corner intact I'd appreciate. If there is a way to remove it by drilling out the spot welds cleanly that would work to but not necessary.

KrazyRay · 02-07-2015, 11:25 PM

Yes. $25 plus shipping. I will cut and verify that it is good and solid.
Thanks,
Ray

sduckworth13 · 02-07-2015, 11:26 PM

Thanks Ray.

67chevy4x4c · 02-08-2015, 01:33 PM

Can you cut drivers side windshield lip off I need from the door post over 24 inchs

fast70swb · 02-08-2015, 02:22 PM

passenger Side roof panel? About 20 inches from drip rail from windsheid to rear window. How much you think shippng?

twistedchevy · 02-08-2015, 08:33 PM

I see their is a wiring harness in their still, how bad is it?

KrazyRay · 02-08-2015, 09:01 PM

Quote:

Originally Posted by 67chevy4x4c

Can you cut drivers side windshield lip off I need from the door post over 24 inchs

Yes. Can you draw the piece you need on one of my pictures?

KrazyRay · 02-08-2015, 09:01 PM

Quote:

Originally Posted by fast70swb

passenger Side roof panel? About 20 inches from drip rail from windsheid to rear window. How much you think shippng?

Yes. Can you draw me the piece also?

KrazyRay · 02-08-2015, 09:03 PM

Quote:

Originally Posted by twistedchevy

I see their is a wiring harness in their still, how bad is it?

I will check on harness.

enduroride · 02-08-2015, 09:26 PM

I would like to get a 8" x 8" square cut out of the front drivers side roof and 6" down the front post.
So go over towards the center of the cab from the corner of the windshield 8", then 8" towards the rear of the cab from the upper front door frame corner . The down the windshield post about 6 or 7"
Thanks, Wade

Hunter67stepside · 02-08-2015, 09:30 PM

How much for the gas pedal if the stud holes are not cracked. To Nashville. 37027

**6t727t2** · 02-08-2015, 09:39 PM

Ray, I'm looking for this cowl piece in no rust condition, mine is rusted low on the inside of cab. Shipping would be to zip 08015 NJ Thanks

fast70swb · 02-08-2015, 10:02 PM

Here is the section I need hope this helps. About about 16 inches from drip rail . In need of the upper door jam part also that the roof tack welds to where the drip rail also welds to.. thank you so much.. and shipping would be to zip 73010

enduroride · 02-09-2015, 07:54 AM

This is the section I was refering to in post #12
Name: cab.jpg
Views: 258
Size: 44.1 KB

Shipping to 70769

Thanks, Wade

KrazyRay · 02-09-2015, 09:34 AM

Quote:

Originally Posted by enduroride

This is the section I was refering to in post #12
Attachment 1361017

Shipping to 70769

Thanks, Wade

$25 plus shipping for that cut, but I need to see if 67chevy is taking that section.

KrazyRay · 02-09-2015, 09:35 AM

Quote:

Originally Posted by Hunter67stepside

How much for the gas pedal if the stud holes are not cracked. To Nashville. 37027

$8 shipped for the gas pedal.

KrazyRay · 02-09-2015, 09:42 AM

Quote:

Originally Posted by 6t727t2

Ray, I'm looking for this cowl piece in no rust condition, mine is rusted low on the inside of cab. Shipping would be to zip 08015 NJ Thanks

$50 plus shipping for this section. I won't know if it is rust free until after I cut it. I can't get exact shipping cost until I know the weight, but I will send out fedex ground when possible.

KrazyRay · 02-09-2015, 09:51 AM

Quote:

Originally Posted by fast70swb

Here is the section I need hope this helps. About about 16 inches from drip rail . In need of the upper door jam part also that the roof tack welds to where the drip rail also welds to.. thank you so much.. and shipping would be to zip 73010

$50 plus shipping for this section. I will cut the a pillar at the top, then I will start at the b pillar and cut it fat behind the seam, I will then cut parallel 17" from the passenger drip rail. so you will get all of the drip rail and some windshield lip that you can pare down to your needs. I will ship fedex ground and have cost when cut.

KrazyRay · 02-09-2015, 09:53 AM

A rare storm is coming through here so I will be making the cuts on Tuesday when it clears up.
Thanks for your patience!
Ray

fast70swb · 02-09-2015, 10:45 AM

10-4 .. I will hold off a couple days because I will be leaving town for work. I will contact you and let you know when I will need it
. Thanks

67chevy4x4c · 02-10-2015, 09:37 PM

this is what i need

Hunter67stepside · 02-10-2015, 10:44 PM

I'll take the pedal. Just please confirm that it mounts to two floor mounted studs and that the stud wells are not cracked. If ok please send parent info in pm

KrazyRay · 02-11-2015, 01:49 AM

I made some cuts today. The cab corner is bad. The windshield lip was sacrificed to save the uncut dash, but I might be able to get it from another cab. The gas pedal is cracked. I will see if I have a good one. The wiring has many splices. I will get the 8x8 section tomorrow.
Thanks,
Ray

02-07-2015, 09:34 PM	#2
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: 1970 Cab for Patches pics Attached Images

02-07-2015, 11:03 PM	#3
sduckworth13 Registered User Join Date: Mar 2011 Location: Kansas City, Missouri Posts: 3,541	Re: 1970 Cab for Patches Can you cut me the passenger side cab corner please? Can you please cut it similar to how this pic is please. If there is anyway to get it apart without removing the spot welds where the rear floor is attached to the cab corner and leave just the area of metal that's attached to the cab corner intact I'd appreciate. If there is a way to remove it by drilling out the spot welds cleanly that would work to but not necessary. Attached Images __________________ Scott Last edited by sduckworth13; 02-07-2015 at 11:25 PM.

02-07-2015, 11:25 PM	#4
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: 1970 Cab for Patches Yes. $25 plus shipping. I will cut and verify that it is good and solid. Thanks, Ray

02-07-2015, 11:26 PM	#5
sduckworth13 Registered User Join Date: Mar 2011 Location: Kansas City, Missouri Posts: 3,541	Re: 1970 Cab for Patches Thanks Ray. __________________ Scott

02-08-2015, 01:33 PM	#6
67chevy4x4c Registered User Join Date: Jan 2012 Location: bartley w va Posts: 191	Re: 1970 Cab for Patches Can you cut drivers side windshield lip off I need from the door post over 24 inchs

02-07-2015, 09:32 PM	#1
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	1970 Cab for Patches Here's a non AC cab that I'm selling patch panels from. The floor, rocker, kick panel areas are bad, but the rest looks to be in good shape. Patches start at $25 plus shipping. The entire dash cut at the windshield is $75 plus shipping. Let me know what you need! Thanks, Ray Attached Images

02-08-2015, 02:22 PM	#7
fast70swb Registered User Join Date: Apr 2014 Location: Bridge Creek , Oklahoma Posts: 69	Re: 1970 Cab for Patches passenger Side roof panel? About 20 inches from drip rail from windsheid to rear window. How much you think shippng?

02-08-2015, 08:33 PM	#8
twistedchevy Registered User Join Date: Jan 2015 Location: napa, ca Posts: 249	Re: 1970 Cab for Patches I see their is a wiring harness in their still, how bad is it? __________________ Mine: 72 c20 Chevy suburban, 02 5.3 w/4l60e , factory ac and 50gal tank. 70 k10 Chevy burb, 04 5.3 w/4l60e np241, with dual 30gal saddle tanks and rear 30 gal tank Dads: 67 c10 step side(project) 72 c10 GMC burb 350/400, with 67 Chevy front clip(grocery getter) Ours: 67 c30 tow truck 70 c10 long bed 383stroker w/digital gauges(work truck)

02-08-2015, 09:26 PM	#12
enduroride Registered User Join Date: Jan 2015 Location: Prairieville, LA Posts: 129	Re: 1970 Cab for Patches I would like to get a 8" x 8" square cut out of the front drivers side roof and 6" down the front post. So go over towards the center of the cab from the corner of the windshield 8", then 8" towards the rear of the cab from the upper front door frame corner . The down the windshield post about 6 or 7" Thanks, Wade __________________ 2016 Silverado2005 GMC Sierra 2002 Chevy Slverado Extra Cab (youngest sons) 2009 GMC Denali (oldest sons) 2015 Lexus 250i (wifes) 1972 Chevy C10 LWB, 5.3 / 4L60e swap "COLOR OF MONEY" http://www.louisianaclassictruckclub.com

02-08-2015, 09:30 PM	#13
Hunter67stepside Registered User Join Date: Oct 2013 Location: Brentwood, Tn Posts: 315	Re: 1970 Cab for Patches How much for the gas pedal if the stud holes are not cracked. To Nashville. 37027

02-08-2015, 09:39 PM	#14
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,438	Re: 1970 Cab for Patches Ray, I'm looking for this cowl piece in no rust condition, mine is rusted low on the inside of cab. Shipping would be to zip 08015 NJ Thanks Attached Images

02-08-2015, 10:02 PM	#15
fast70swb Registered User Join Date: Apr 2014 Location: Bridge Creek , Oklahoma Posts: 69	Re: 1970 Cab for Patches Here is the section I need hope this helps. About about 16 inches from drip rail . In need of the upper door jam part also that the roof tack welds to where the drip rail also welds to.. thank you so much.. and shipping would be to zip 73010 Attached Images

02-09-2015, 07:54 AM	#16
enduroride Registered User Join Date: Jan 2015 Location: Prairieville, LA Posts: 129	Re: 1970 Cab for Patches This is the section I was refering to in post #12 Shipping to 70769 Thanks, Wade __________________ 2016 Silverado2005 GMC Sierra 2002 Chevy Slverado Extra Cab (youngest sons) 2009 GMC Denali (oldest sons) 2015 Lexus 250i (wifes) 1972 Chevy C10 LWB, 5.3 / 4L60e swap "COLOR OF MONEY" http://www.louisianaclassictruckclub.com

02-09-2015, 09:53 AM	#21
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: 1970 Cab for Patches A rare storm is coming through here so I will be making the cuts on Tuesday when it clears up. Thanks for your patience! Ray

02-09-2015, 10:45 AM	#22
fast70swb Registered User Join Date: Apr 2014 Location: Bridge Creek , Oklahoma Posts: 69	Re: 1970 Cab for Patches 10-4 .. I will hold off a couple days because I will be leaving town for work. I will contact you and let you know when I will need it . Thanks



Register or Log In To remove these advertisements.

02-10-2015, 09:37 PM	#23
67chevy4x4c Registered User Join Date: Jan 2012 Location: bartley w va Posts: 191	Re: 1970 Cab for Patches this is what i need Attached Images

02-10-2015, 10:44 PM	#24
Hunter67stepside Registered User Join Date: Oct 2013 Location: Brentwood, Tn Posts: 315	Re: 1970 Cab for Patches I'll take the pedal. Just please confirm that it mounts to two floor mounted studs and that the stud wells are not cracked. If ok please send parent info in pm

02-11-2015, 01:49 AM	#25
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: 1970 Cab for Patches I made some cuts today. The cab corner is bad. The windshield lip was sacrificed to save the uncut dash, but I might be able to get it from another cab. The gas pedal is cracked. I will see if I have a good one. The wiring has many splices. I will get the 8x8 section tomorrow. Thanks, Ray

Register or Log In To remove these advertisements.