The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-25-2005, 11:40 PM   #1
OldSkool71
C/10 CLUB MEMBER
 
OldSkool71's Avatar
 
Join Date: Jul 2003
Location: Lakewood, CA
Posts: 993
Option Sheet Translation Please...

Here is a pic of the options sheet from a truck I was looking at buying. The truck is equiped as follows: cheyenne super, 400cid, 400trans, tach, vacuum gauge, speed warning,tilt wheel,am/fm, houndstooth interior. My question is if im reading this sheet correctly this is not even a true cheyenne super and alot of these options did not come on this truck from the factory? I am curious about the options listed specificaly the floor board one and the custom comf & conv eq? If you are familiar with these please fill me in on what you think. I was just trying to determine if this was originally equipped with what it has now.

thanks, Ron
Attached Images
 
__________________
-Ron-
OldSkool71 is offline   Reply With Quote
Old 11-26-2005, 12:34 AM   #2
Rod
 
Join Date: Dec 1999
Location: Eastern - Manitoba Canada, Winnipeg
Posts: 4,369
Re: Option Sheet Translation Please...

Floor option was that it came with a wood floor in the box.

The custom convenience package was a lesser combination of a trim package than the cheyenne...so its not a true 71 cheyenne shortbox..but a clone...seems like he knew what the good stuff was for option though..sounds like a decent package now installed.

Glove box sticker shows a 1971 short box 400 BB automatic AC truck. not a bad package to start with.

It depends on how much you want to know about originallity.

Did it come with a speedwarning..well no..was an option only till 1969, still a nice item to have.
Could it have come with a vacuum guage..nope its been added out of a 3 ton and up...but there a sought after extra also.

The tilt, houndstooth and am fm were all available in this year of 1971.

If I had the same truck to start with I'd of put those same option in also to spruce it up ..and probably more. Whats installed is still correct for the era..so I wouldn't complain. Find some bucket seats now and buy it if a good price.
__________________
Senior active founding member.
70 3/4 ton GMC Suburban 4x4 250/4 spd.
71 1/2 ton Suburban Chevy 4x4, 350/350
72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane
2005 FLSTSCI Harley Springer
85 FXSB Harley Lowrider
72 Triumph 650 Bonneville 5spd
"Poor people don't have hobbies" Quote from wife.

Last edited by Rod; 11-26-2005 at 12:44 AM.
Rod is offline   Reply With Quote
Old 11-26-2005, 01:06 AM   #3
OldSkool71
C/10 CLUB MEMBER
 
OldSkool71's Avatar
 
Join Date: Jul 2003
Location: Lakewood, CA
Posts: 993
Re: Option Sheet Translation Please...

thanks that helps. but if it was equipped with tilt, houndstooth, and am/fm would it be listed on the option sheet. Don't get me wrong it s a *****in truck but with an asking price of $27995.00 I think it should have been originally equipped with those items.

thanks, Ron
__________________
-Ron-
OldSkool71 is offline   Reply With Quote
Old 11-26-2005, 09:06 AM   #4
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,858
Re: Option Sheet Translation Please...

Sounds like a nice truck with a little "hybrid" action goin`on.On top of what Rod said,if it had been a Cheyenne or Super the front chrome bumper would have not been itemized.The comf & conv equipt means you`re up to a CustomDeluxe in`71.Some said Cheyenne(Super) and some said CustomSportTruck equipt.It was a CustomDeluxe,also,because it had black "cloth" trim.Personally,I like finding CustomDeluxes that are optioned-out better than most Cheyennes,like that one.I guess it`s had the carpet/headliner/tailgate band added,too.(woodgrain belt?)
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~
special-K is offline   Reply With Quote
Old 11-26-2005, 09:37 AM   #5
LUV2XCLR8
The LuvShack Garage
 
LUV2XCLR8's Avatar
 
Join Date: Jan 2004
Location: Maple Grove, TN (West Side)
Posts: 30,482
Re: Option Sheet Translation Please...

Quote:
Originally Posted by OldSkool71
but with an asking price of $27995.00 I think it should
have been originally equipped with those items. thanks, Ron

I agree Ron, sounds wicked, but that price is a lil steep, but it is also
supply vs. demand, and one mans junk is another mans gold, I could
see myself paying that for a truck, but it better be a show stopper
__________________
Owner/Op: "TN Classic Transport Carriers"
The Toy: "Square Vette" 72 Hybrid Blazer
Toy Barn: "LuvShack" 40 x 60 x 20 Shop
Tow Piggy:"Maddy" 88 Silverado 3500
Hauler: "Feathers" 14 Aluma 8218T

Last edited by LUV2XCLR8; 11-26-2005 at 09:37 AM.
LUV2XCLR8 is offline   Reply With Quote
Old 11-26-2005, 03:57 PM   #6
84 PUMPKIN
Registered User
 
Join Date: Oct 2004
Location: Alabama
Posts: 166
Re: Option Sheet Translation Please...

I just love those blank repro option stickers don't you? Drag a plain-jane long wheel base truck out of the woods, shorten the frame, add a bunch of goodies, buy a $5.00 blank option sheet and you've got yourself a one-owner, all original, Super Cheyenne with all of the nice options. I'm not saying that this is the case but it's been done more than once.


For $28K I'm gonna need the original window sticker, bill of sale, protect-o-plate, and a sworn statement (written in blood) from the original owner.

Last edited by 84 PUMPKIN; 11-26-2005 at 03:59 PM.
84 PUMPKIN is offline   Reply With Quote
Old 11-26-2005, 10:23 PM   #7
ChevLoRay
Old Skool Club
 
ChevLoRay's Avatar
 
Join Date: Jun 2001
Location: Benton, AR "The Heart of Arkansas"
Posts: 10,880
Re: Option Sheet Translation Please...

Ain't it a shame that there are people who think we'll buy anything?? The "old car folks" are known for their love of old cars/trucks, yet there are some of them who have really deep pockets and can afford to pay whatever the asking price is, and that makes it difficult for those of us who are financially challenged, to compete with them for those things that we really want. Thank goodness for the aftermarket.
__________________
Member Nr. 2770

'96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed.

'69 C-10 SWB; 350/TH400 - in limbo

The older I get, the better I was.
ChevLoRay is offline   Reply With Quote
Old 11-26-2005, 11:11 PM   #8
screamin_c102
Account Suspended
 
screamin_c102's Avatar
 
Join Date: Feb 2005
Location: Yoncalla Oregon
Posts: 775
Re: Option Sheet Translation Please...

I'll take a $1500 dollar base model any day, then you can build it as you wish (clone or mod) without having the wrath of the puritans come down on you.



If I were to pay $25,000 on a truck, it better have been made later than '03 :LOL:
screamin_c102 is offline   Reply With Quote
Old 11-27-2005, 02:42 AM   #9
69TowRig
Senior Member
 
Join Date: Jan 2005
Location: Raleigh, NC
Posts: 894
Re: Option Sheet Translation Please...

I just like the "hydro boost". Didn't know that was an option, but now I want it!
__________________
-Chris
Building a stripper, one part at a time: 1969 K5, 307, 3spd, 3 seats, hard top. Added Pwr Discs, Pwr Steering, Aux Battery, T-case Skid, Lighted Sidemarkers, HEI, Lock-Right Diff, ECE Class IV Hitch, 32" MT/Rs. Parts to Install: Hand Throttle, Console, Tow Hooks, Dual Horns, AM-FM, Dealer Swing-Away Tire Carrier, Gas Tank Skid.
Also building a 1950 Willys CJ-3A and off-roading a 2001 Nissan Frontier on 1-Ton Portals...
69TowRig is offline   Reply With Quote
Old 11-27-2005, 03:25 AM   #10
roger0080
Registered User
 
Join Date: Nov 2000
Location: Carver County, Minnesota, USA
Posts: 626
Re: Option Sheet Translation Please...

That is not a reproduction SPID plate if you examine it closely.
__________________
72 Chev C-10 90% restored (former AZ truck) ...
71 Chev K-20 Cheyenne my vacation crusier...
72 Chev C-10 Now retired and striped after many faithful miles...
72 GMC 1500 Retired to the junk yard after bought new in '71...
roger0080 is offline   Reply With Quote
Old 11-27-2005, 08:08 AM   #11
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,858
Re: Option Sheet Translation Please...

It`s an originally nice truck!Just not a Cheyenne,that`s all.The interior could be changed to Parchment and recover the seat with the orange tartan plaid inserts and it would be a Big Block Shortbed Highlander.Alot cooler than a Cheyenne in my book.
I`d have to see the whole truck and know the whole story(seller`s)to judge if it`s worth it.It shouldn`t be offered as an aoriginal Cheyenne,for sure!Like I said before,I like nice trucks in all trim levels.A`71 Custom/10 could be a Short Fleetside,402/TH400,posi,a/c,chrome bumpers,sport mirrors,tach/tilt,am/fm/8-track truck.A Cheyenne could have an I6/3spd,no a/c,am radio.

Oh BTW OldSkool71,I really liked the`71 you sold.That`s what I`m talkin`about!
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Last edited by special-K; 11-27-2005 at 08:23 AM.
special-K is offline   Reply With Quote
Old 11-27-2005, 01:19 PM   #12
Longhorn Man
its all about the +6 inches
 
Longhorn Man's Avatar
 
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
Re: Option Sheet Translation Please...

I just looked at my option sheet.. that isn't a hydro vac booster, that is a normal brake vacume booster. Who ever was on the typewriter that day was sniffin glue.
Same option code as the booster on my one ton.
Attached Images
 
Longhorn Man is offline   Reply With Quote
Old 11-30-2005, 01:03 PM   #13
72 longhorn BB
Registered User
 
72 longhorn BB's Avatar
 
Join Date: Jan 2000
Location: Michigan
Posts: 312
Re: Option Sheet Translation Please...

Yeah, for 25 Grand, it had better be straight, clean, original and highly optioned, highly desired model; not to mention fully papered.
__________________
Chuck

1972 C-20 Longhorn
402 BB .030" over (409?), curved HEI,
RV cam, quadrajet, dual 3" exhaust, TH 400 ported w/shift kit

1999 K1500 Suburban (old style)
5.7L Vortec
4L60E

"No matter where you go, ........ there you are"

Last edited by 72 longhorn BB; 11-30-2005 at 01:04 PM.
72 longhorn BB is offline   Reply With Quote
Old 12-01-2005, 07:07 PM   #14
jesgord
Registered User
 
jesgord's Avatar
 
Join Date: Nov 2004
Location: Orient, NY
Posts: 27
Re: Option Sheet Translation Please...

That option sheet looks awfull clean to me. No peeling, no rips, no dirt. And now that I see the booster "mistake" I wonder if its not one of the repros filled out by the seller? Just a possibility.....I certainly don't know for sure
jesgord is offline   Reply With Quote
Old 12-01-2005, 07:26 PM   #15
cheyenne10
Senior Member
 
cheyenne10's Avatar
 
Join Date: Apr 2000
Location: Oregon
Posts: 2,512
Re: Option Sheet Translation Please...

I've had/have option sheets that clean. Must have been awesome with fonts if this is madeup. I think I have seen several with "hydro" boost brakes. "Hydro" is water though as far as I know. Lets see some more pics of truck. Should be a real nice beauty. If really nice would be hard to build for a lot less. I would like to see someone itemize reasonable parts costs list sometime and then pick stuff off of it to see raw cost of a "restored/restified" truck.
__________________
Bob
cheyenne10 is offline   Reply With Quote
Old 12-01-2005, 07:36 PM   #16
screamin_c102
Account Suspended
 
screamin_c102's Avatar
 
Join Date: Feb 2005
Location: Yoncalla Oregon
Posts: 775
Re: Option Sheet Translation Please...

Why would you have to be a whiz with fonts? All you need is a thriftstore typewriter, and an Ebay blank RPO sheet an wiz bang boom...You got yourself a fully optioned CST.

My dad used to say " If it looks too good to be true....it probably is"
screamin_c102 is offline   Reply With Quote
Old 12-01-2005, 07:49 PM   #17
cheyenne10
Senior Member
 
cheyenne10's Avatar
 
Join Date: Apr 2000
Location: Oregon
Posts: 2,512
Re: Option Sheet Translation Please...

I have seen quite a few redone and I could tell them all. The originals all seem to have same font type and have the "vintage fuzz". I would be interested to read what would work the best. It would be great to do this on a PC also. With todays technology it seems real possbile.

My guess on this truck is following several opinions above. Truck started out pretty well optioned and then made better. I like to see cab vin, frame vins and glove box door match. Can't we order the kit that would show all specs of a particular vin as built? Called a "restoration kit" I beleive.
__________________
Bob
cheyenne10 is offline   Reply With Quote
Old 12-01-2005, 11:01 PM   #18
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,858
Re: Option Sheet Translation Please...

The standard IBM-type on a typewriter is the exact type used.That one looks real to me.If it was a reproed counterfeit,wouldn`t it be altered to list the options as the truck appears?
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~
special-K is offline   Reply With Quote
Old 12-02-2005, 01:12 AM   #19
Longhorn Man
its all about the +6 inches
 
Longhorn Man's Avatar
 
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
Re: Option Sheet Translation Please...

That one is in real good shape becouse it got the plastic layer over it. My first truck had that and it looked brand new... but the plain paper ones always look like death.
Longhorn Man is offline   Reply With Quote
Old 12-18-2005, 01:00 AM   #20
OldSkool71
C/10 CLUB MEMBER
 
OldSkool71's Avatar
 
Join Date: Jul 2003
Location: Lakewood, CA
Posts: 993
Re: Option Sheet Translation Please...

Thanks for the comments, all were valid and very helpful. I've decided to pick this one up after the holidays. Here are a couple of pics let me know what you think. Also I will be selling my one owner (prior to me of course) 72 Cheyenne Super SWB to make room for the 71 if you know anyone interested.

thanks, Ron
Attached Images
     
__________________
-Ron-

Last edited by OldSkool71; 12-18-2005 at 01:26 AM.
OldSkool71 is offline   Reply With Quote
Old 12-18-2005, 01:46 AM   #21
BigMike
Registered User
 
BigMike's Avatar
 
Join Date: Sep 2004
Location: Rancho Santa Margarita - SoCal
Posts: 1,432
Re: Option Sheet Translation Please...

Truck is absolutely gorgeous!!! Got anymore side or front shots? I really like the colors

Mike
BigMike is offline   Reply With Quote
Old 12-18-2005, 02:39 AM   #22
stllookn
Saving 1 truck at a time!
 
stllookn's Avatar
 
Join Date: Aug 2001
Location: Kent, WA
Posts: 6,465
Re: Option Sheet Translation Please...

You sick man...you, very very sick to show us those pics! I go throw rocks at my truck now!
__________________
'68 C20 Longhorn 50th Anniversary 400/TH400
'68 C20 Longhorn 50th Anniversary 468/TH400w/buckets
'72 C20 Halfhorn (Longhorn w/o cab and front clip)
'69 Flxible Cruiser (look up ugly in the dictionary)
stllookn is offline   Reply With Quote
Old 12-18-2005, 03:07 AM   #23
OldSkool71
C/10 CLUB MEMBER
 
OldSkool71's Avatar
 
Join Date: Jul 2003
Location: Lakewood, CA
Posts: 993
Re: Option Sheet Translation Please...

Thanks for the nice comments guyz. Stllookn don't start throwing rocks so quick. Looks like you have a pretty nice line up there. big.mike i'll look to see if I have some other shots. Can't wait to get behind the wheel of this baby.
__________________
-Ron-
OldSkool71 is offline   Reply With Quote
Old 12-18-2005, 04:04 AM   #24
cypressbog
Go Pack Go!
 
Join Date: Nov 2005
Location: Green Bay
Posts: 2,669
Re: Option Sheet Translation Please...

Someone spent a lot of money to make that truck a show winner!
cypressbog is offline   Reply With Quote
Old 12-18-2005, 09:01 AM   #25
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,858
Re: Option Sheet Translation Please...

All that chit-chat before and now,pictures!I figured from your other trucks this would be one wicked truck.Yeah,it`s built,made-up,not original,...I call it "hybrid".On a job like that,it could have started as a frame and a heap of parts.It`s a custom with an "original" theme.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~
special-K is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:12 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com