Which sway bars will fit? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Gregs67 · 11-10-2008, 08:08 PM

Searched but didnt find the answer I'm looking for.

Will 73-87 2WD sway bars fit my 67 2WD step? Was there ever a rear sway bar for this application? And what mods must I make to ensure front/rear sways fits properly?

Thanks all!

low'n slow · 11-10-2008, 09:58 PM

Yes the front sway bars will fit. I've put 2 on from mid 80's trucks. Can't help you on the rear.

bfay17 · 11-10-2008, 10:03 PM

i had a similar question to yours. What sway bars will work for a 1970 c/20 4x4 with a solid front axle?

rscam · 11-10-2008, 10:21 PM

87-95 Nissan Pathfinder rear sway fits perfect on a leaf truck. Its the exact width of the frame so you don't have to weld brackets like the Camaro bar. Its one inch diameter. It should fit the coil over rear also. $12 at Pull a part.

rscam · 11-10-2008, 10:23 PM

Also the 3/4 ton Suburbans had the biggest front sway bar up to 91. I installed one on mine.

aboyer · 11-10-2008, 11:24 PM

I found a front sway bar off a 3/4 ton truck and it worked out great. I forgot the size, but it is also the same on the 1 ton truck.

I got mine at pull-a-part for $10. I also grabbed a rear sway bar from an 82-91 camaro. I haven't installed this yet, but have heard good things.

Below are the links for the camaro install.

http://67-72chevytrucks.com/vboard/s...highlight=sway

http://67-72chevytrucks.com/vboard/s...d.php?t=178261

aboyer · 11-10-2008, 11:24 PM

I found a front sway bar off a 3/4 ton truck and it worked out great. I forgot the size, but it is also the same on the 1 ton truck.

I got mine at pull-a-part for $10. I also grabbed a rear sway bar from an 82-91 camaro. I haven't installed this yet, but have heard good things.

Below are the links for the camaro install.

http://67-72chevytrucks.com/vboard/s...highlight=sway

http://67-72chevytrucks.com/vboard/s...d.php?t=178261

11-10-2008, 08:08 PM	#1
Gregs67 Registered User Join Date: Oct 2008 Location: bath PA Posts: 22	Which sway bars will fit? Searched but didnt find the answer I'm looking for. Will 73-87 2WD sway bars fit my 67 2WD step? Was there ever a rear sway bar for this application? And what mods must I make to ensure front/rear sways fits properly? Thanks all!

11-10-2008, 09:58 PM	#2
low'n slow Too Dumb To Know Better Join Date: Nov 2005 Location: Texas Posts: 882	Re: Which sway bars will fit? Yes the front sway bars will fit. I've put 2 on from mid 80's trucks. Can't help you on the rear.

11-10-2008, 10:03 PM	#3
bfay17 Young Gun Join Date: Aug 2008 Location: Waupaca, Wi Posts: 192	Re: Which sway bars will fit? i had a similar question to yours. What sway bars will work for a 1970 c/20 4x4 with a solid front axle?

11-10-2008, 10:21 PM	#4
rscam Registered User Join Date: Nov 2005 Location: Monroe,Georgia Posts: 313	Re: Which sway bars will fit? 87-95 Nissan Pathfinder rear sway fits perfect on a leaf truck. Its the exact width of the frame so you don't have to weld brackets like the Camaro bar. Its one inch diameter. It should fit the coil over rear also. $12 at Pull a part.

11-10-2008, 10:23 PM	#5
rscam Registered User Join Date: Nov 2005 Location: Monroe,Georgia Posts: 313	Re: Which sway bars will fit? Also the 3/4 ton Suburbans had the biggest front sway bar up to 91. I installed one on mine.

11-10-2008, 11:24 PM	#6
aboyer Adam B Join Date: Jul 2005 Location: Westfield Posts: 151	Re: Which sway bars will fit? I found a front sway bar off a 3/4 ton truck and it worked out great. I forgot the size, but it is also the same on the 1 ton truck. I got mine at pull-a-part for $10. I also grabbed a rear sway bar from an 82-91 camaro. I haven't installed this yet, but have heard good things. Below are the links for the camaro install. http://67-72chevytrucks.com/vboard/s...highlight=sway http://67-72chevytrucks.com/vboard/s...d.php?t=178261



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.