![]() |
![]() |
#1 |
Registered User
Join Date: Jul 2011
Location: Des Moines, Iowa
Posts: 3,016
|
Project "My Happy Mess"
New member and think this forum is awesome! 10 years ago I bought my 71' (C10/20, LWB, 350sb) Custom Deluxe with the intentions of someday restoring her to original condition. It was a farm truck used to haul horse manur, etc. Well, that day has come and the project (partial restoration) is well underway!
![]() Though there's something the matter and I'm not able (or smart enough? lol) to figure it out. I think my truck was converted (and/or previously restored) from a C20 to a C10. Looking at the SPID and the driver's door, they both reference a C20 in the VIN #. But, the emblems on the fenders say C10 Custom Deluxe and not C20 Custom Deluxe. It's got a 12 bolt rear end and 5 on 5 (front and back). I have registrations dating back to 71', and even though the VIN # is the same, some registrations note C10 as model type. Maybe it was converted? I've tried contacting one of the previous owners, but wasn't successful. I've got it stripped down - bed, hood and fenders off. Reading the forums here, I noticed that the frame should be stamped with the VIN also. But since I'm doing a "frame-on" (partial) restoration, I can't see the VIN # on the frame since the cab is still on (with no intention of taking it off either). The cab will need some work, after the blasting and undercoating (getting done next week! ![]() Is there any way for me to identify? Or is it really considered a C10 now that it has 5 on 5 with the matching rear-end. My concern is the front suspension and parts. I've read that 3/4 ton has slightly different parts than the 1/2. Any insight or suggestions going forward, are my concerns valid? Pictures up soon! litew8 Last edited by litew8; 07-08-2011 at 05:50 PM. |
![]() |
![]() |
![]() |
#2 |
Senior Member
![]() Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 7,559
|
Re: litew8 Restoration Project underway (71' C10?)
litew8, welcome to the site, sorry but I don't know that much about these trucks. I'm sure someone on here will help out......Jim
__________________
my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br /> |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jul 2011
Location: Des Moines, Iowa
Posts: 3,016
|
Re: litew8 Restoration Project underway (71' LWB)
Thank you oldman3. Doing a little more searching, I found some visuals.
http://67-72chevytrucks.com/vboard/s...d.php?t=296953 These boards rock! I'll be able to check and see if a previous owner swapped out the entire frame or not, come Monday. This will help me ensure I get the right cab mounts/bushings. Last edited by litew8; 07-08-2011 at 10:44 PM. |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jul 2011
Location: Des Moines, Iowa
Posts: 3,016
|
recent pictures
The story continues - my prior attempt at contacting the previous owner proved successful after-all. I received a phone call the other day, and got a lot of good information/history of my truck. Here are some recent pictures, I'm sure I have older ones, though I'll have to look later:
Before pics, July 4th, 2011 - cleaned, ready for blasting Interior - will clean up nicely Last edited by VA72C10; 07-10-2011 at 12:59 PM. |
![]() |
![]() |
![]() |
#5 |
PROJECT 7DEUCE
![]() Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,608
|
Re: litew8 Restoration Project underway (71' C10?)
Welcome to the board from southern oregon... Hope you figured out the frame deal..c-10 or c-20
__________________
GO BIG GREEN ![]() MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. |
![]() |
![]() |
![]() |
#6 |
So Many Ideas, So Little Money
Join Date: Sep 2001
Location: Marshalltown, IA
Posts: 1,610
|
Re: litew8 Restoration Project underway (71' C10?)
welcome to the board from up the highway (Marshalltown)
__________________
72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu ![]() Marshalltown, Iowa |
![]() |
![]() |
![]() |
#7 |
VA72C10
![]() Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,269
|
Re: litew8 Restoration Project underway (71' C10?)
Welcome to the board. Looks like a nice project!!!
__________________
Looking for a 67-72 swb or blazer project in or around VA. ![]() |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Jul 2011
Location: Des Moines, Iowa
Posts: 3,016
|
Re: litew8 Restoration Project underway (71' C10?)
Thanks for the welcoming everyone! Chevy2racr, got any good OEM fenders or bedsides? Got some more pictures, time to show off more custom pinstripe -
Hood is in good shape, except for the hole someone drilled in the top. Small amount of body work will conceal it well: Bedsides not in the best of shape, might need aftermarket for both. Front bumper has a indentation on the right bottom. You can also see on the bottom of the pile, what was left of the wood bed. Custom pinstripe on the bedsides (more about this in a bit): ...on the inner wells - Rear wells good shape, need minor body work - The back-end of the fenders - Check out the fancy work on the underside of the hood - Now for the bold! Haha! Real men can appreciate these (as I have). I actually liked this pinstripe work, but I'm not going to restore it with the truck. It's a little too bold for driving to the office, etc... on the farm, very cool. I am however going to try and reproduce (via vinyl) the pinstripes shown above (not sure about under the hood (that may have to go if it gets repainted)) - From a distance, they resemble corn, lol Last edited by litew8; 07-10-2011 at 07:38 PM. |
![]() |
![]() |
![]() |
#9 | |
Registered User
Join Date: Jul 2011
Location: Des Moines, Iowa
Posts: 3,016
|
which is it
Quote:
Other stuff he said - He didn't replace the rear-end or anything. He did purchase custom wheels (not pictured yet) for the 5 on 5 - so that confirms it was like that when he bought it. He said (I'm pretty sure I heard right) he bought it from a kid who wanted a 4x4 instead. He says the truck had the original engine with only 50K on it. When he had to replace the master cylinder, he had to return it because it wouldn't bolt up right. It turns out he had to order the master cylinder from the C20 instead. I made a run out to the sandblaster today to drop off the bed rails. I was hoping my truck was sitting outside awaiting tomorrow, but it wasn't so I couldn't take any pictures tonight. So it's still a mystery. *************** The pinstripe work was done by "Dirty Harry" (he gave the guy's real name, but I forget). At this time, Don Johnson (the movie star) flew "Dirty Harry" down to Florida for the week to have him paint "dolphins" on the side of his yacht or speed boat? Cool! The previous owner said he may have a picture of the truck when it was "finished" back in 91', and that he'll mail it to me if he finds it. -------------------------------------------------- It doesn't make any sense to suggest the truck rolled off the assembly line as a C20 with the 5 lug rear/front end, but C20 frame/coils, right? It did have the Auxiliary Spring - but all that is left now are the mounts for them, of which exhaust support brackets are welded to the underside of them. Last edited by litew8; 07-10-2011 at 07:42 PM. |
|
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Mar 2011
Location: Alto,Mi
Posts: 164
|
Re: litew8 Restoration Project underway (71' C10?)
welcome to the board, good luck with the project
__________________
2008 HD 2010 Camaro 2ss (The Wife's Ride) 2005 Suzuki GSX-R 1300 "Busa" 1969 C-10 (under Construction) 2013 Sonic LT "LIVE LIFE,TASTE DEATH" |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Jul 2011
Location: Des Moines, Iowa
Posts: 3,016
|
Re: litew8 Restoration Project underway (71' C10?)
Thanks! I made it out to the shop today. They haven't gotten started.
Got some more pictures. If what I read is correct, it looks like I have a C20 frame with a 5 on 5 setup. Someone please correct me if I'm wrong. I've outlined the C20 parts of the frame that distinguishes it from the C10. First, here's a picture I found from 2004. Taken before the rust on the passenger door began breaking out from the bottom mirror mount. Here's the air filter cover that "Dirty Harry" air brushed. Rear cab mount Front cab mounts. Sits lower than frame = C20 Extra support brackets not on the C10 = C20 Auxiliary Spring mount Differential. Anyone know what the numbers mean? The custom ordered wheels. Performance |
![]() |
![]() |
![]() |
#12 |
PROJECT 7DEUCE
![]() Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,608
|
Re: litew8 Restoration Project underway (71' C10?)
That looks just like the 3/4 ton frame that is under my now 1/2 ton..
__________________
GO BIG GREEN ![]() MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. |
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: Jul 2011
Location: Des Moines, Iowa
Posts: 3,016
|
Re: litew8 Restoration Project underway (71' C10?)
Not the most exciting news, but blasting is 3/4 finished
![]() Going to stop out and take more pics, posting late tonight. |
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Jul 2011
Location: Des Moines, Iowa
Posts: 3,016
|
blasting
Got some pictures after the truck was blasted. I think it turned out good, all things considering. He said I had quite of bit of "black rust" on the underside of the driver's side trailing arm, in between the affixed plate on the bottom side. The rust has warped the trailing arm a little, and has eaten through the trailing arm some. I'll have better pictures later.
The other issue - a pin sized hole opened up on the passenger's side/rear brake line. ![]() Last edited by litew8; 07-15-2011 at 03:02 PM. |
![]() |
![]() |
![]() |
#15 |
VA72C10
![]() Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,269
|
Re: Project "My Happy Mess"
Came out looking pretty clean overall!!! A couple spots to fix but all in all looks good and should look great painted!
__________________
Looking for a 67-72 swb or blazer project in or around VA. ![]() |
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Jul 2006
Location: Central PA
Posts: 12,201
|
Re: Project "Do Over"
nice project
__________________
The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" |
![]() |
![]() |
![]() |
#17 |
67-72 parts collector,…
![]() Join Date: Nov 2002
Location: Mid-MO
Posts: 22,701
|
Re: Project "Do Over"
Great looking truck.
Be care sandblasting where there are grease seals. That sand goes everywhere.
__________________
Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 |
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: Jul 2011
Location: Des Moines, Iowa
Posts: 3,016
|
Re: Project "Do Over"
Thanks all! Update on some context:
Decided not to have it undercoated, just primed (pics up next). Figured it would be difficult to do the cab (and other) work with undercoating, so it'll wait until later. I bought the truck off of a girl who raised horses. She owned the truck a few years, but didn't do any preventive maint. The previous owner I mentioned above sold it in 1991 to a guy, who sold it to her after a few years. This truck has had a handful of owners, of which all lived in rural areas. I do not live, or work, on a farm. My goal is to restore the truck to at least a 5-10 year old level. It'll probably look allot nicer than that. Not going to be perfect, but good enough - I do intend to use it sparingly for whenever. It isn't my daily driver, so it sits around quite a bit. -------------- Sand and grease zerks- probably was my biggest concern going forward with the blasting. The guy who blasted my truck was really good. The company has been around for a long time. I'll probably end up replacing some of the suspension up front. |
![]() |
![]() |
![]() |
#19 | |
Registered User
Join Date: Jul 2011
Location: Des Moines, Iowa
Posts: 3,016
|
Re: Project "My Happy Mess"
Quote:
I figured that brake line would disintegrate, it was the worst with rust. I ended up replacing the front lines about 5 years ago due to them rusting away. Okay, not bad for a 40 year old truck! The BEST steel in the world, ever made! Love this truck and everything it stands/stood for in American ingenuity/craftsmanship. Here's the truck frame/suspension primed! ![]() Trailing arm, may need some patch work The "black rust", he said it "grows" - it's alive! ![]() Pictured in an above post, I'm so glad the cab floor was clean! It had a thick coat of old undercoating that seemed to have protected it well. You guys are fortunate I like taking pictures! lol ![]() ![]() Last edited by litew8; 07-16-2011 at 12:44 PM. |
|
![]() |
![]() |
![]() |
#20 |
VA72C10
![]() Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,269
|
Re: Project "My Happy Mess"
I'd probably just look somewhere like AZ, NV, or CA for a nice used set of 3/4 ton trailing arms. They're the same as the others but they have the extra support welded onto the top and bottom (what rusted the worst on the one)
__________________
Looking for a 67-72 swb or blazer project in or around VA. ![]() |
![]() |
![]() |
![]() |
#21 | |
Registered User
Join Date: Jul 2011
Location: Des Moines, Iowa
Posts: 3,016
|
Re: Project "My Happy Mess"
Quote:
I need to do something about that busted brake line. No garage and never enough free time. Last edited by litew8; 07-16-2011 at 12:55 PM. |
|
![]() |
![]() |
![]() |
#22 |
Registered User
Join Date: Jul 2011
Location: Des Moines, Iowa
Posts: 3,016
|
Re: Project "My Happy Mess"
Truck was dropped off at the brake shop an hour ago!
![]() |
![]() |
![]() |
![]() |
#23 |
Registered User
Join Date: Jul 2011
Location: mckinney, tx
Posts: 7
|
Re: Project "My Happy Mess"
Nice looking project, wish I would have sent mine to the brake shop. I messed around for over a week before I finally got them working. I've got a 71 LWB and I'm stuck on the gas pedal assembly. Any chance you have a picture to post of the the back side of the pedal/how it attaches to the rod assembly. I think a picture would do wonders, can't find it in the books anywhere. Thanks have fun with yours!
|
![]() |
![]() |
![]() |
#24 |
Registered User
Join Date: Apr 2011
Location: knkxville iowa
Posts: 186
|
Re: Project "My Happy Mess"
Welcome from knoxville
Posted via Mobile Device |
![]() |
![]() |
![]() |
#25 |
Registered User
Join Date: Jul 2011
Location: Des Moines, Iowa
Posts: 3,016
|
Re: Project "My Happy Mess"
Thanks wicky - from Knoxsville, IA - home of the world famous Knoxsville Raceway!
![]() |
![]() |
![]() |
![]() |
Bookmarks |
|
|