Picked up my first C10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Shocks · 01-10-2014, 03:12 PM

Just picked up my first C10. It's rough but runs decent. It has 396 badges on the side. I cannot read the tag on glovebox do to someone covering it in masking tape years ago. Having a really hard time removing the tape without destroying the sticker. I will post more pictures this weekend.

**bigmac73** · 01-10-2014, 03:27 PM

Looks good and solid from this picture

ho70 · 01-10-2014, 03:27 PM

wet the tape and may break apart with rubbing

flashed · 01-10-2014, 03:45 PM

Very nice .

oldschool18 · 01-10-2014, 04:24 PM

Nice find and welcome to the board!

Shocks · 01-10-2014, 04:52 PM

I need to replace the metal bed floor. I see that the bed floor is bolted on the sides and the front of the bed. But how is attached on the rear? I have been looking at this truck for seven years before the owner decided to sell it to me.

**RenoKeene** · 01-10-2014, 05:01 PM

Welcome from Florida also.

**LockDoc** · 02-03-2014, 10:40 PM

Quote:

Originally Posted by Shocks

I need to replace the metal bed floor. I see that the bed floor is bolted on the sides and the front of the bed. But how is attached on the rear? I have been looking at this truck for seven years before the owner decided to sell it to me.

The rear has a small spot weld on each side by the stake pocket support. Cut or grind the spot welds. Everything else is bolted.

LockDoc

**Mathew21** · 01-10-2014, 08:38 PM

Nice truck.

SeTx67 · 01-10-2014, 08:59 PM

Nice find

Tinkermc · 01-10-2014, 09:51 PM

Welcome to the Forum and it's nice you brought a good truck and pic's.

yuccales · 01-10-2014, 10:03 PM

Good lookin' rig you got there!

chrisestes · 01-11-2014, 12:44 PM

nice truck

1911a1 · 01-11-2014, 01:10 PM

Nice pickup! I live about 50 miles from you, over in Winnsboro. Good luck with your new project.

trkfrk · 01-11-2014, 01:59 PM

Looks like a solid truck. Welcome to the forum.

Shocks · 01-11-2014, 05:42 PM

Thanks!! I went ahead and threw a different wheels and tires on it. Need to find some center caps.

70LonghornCST · 01-11-2014, 05:49 PM

Welcome! Very nice project. I can't wait to see it as you get it to where you want.

Shocks · 01-18-2014, 07:13 PM

Front end shot

**CC69Rat** · 01-19-2014, 12:12 AM

Nice looking truck ! Welcome to the board from TN.

FRANKENSTEINC10 · 01-19-2014, 09:14 AM

awesome truck man.

bean · 01-19-2014, 09:26 AM

nice truck!!! on the bed floor i'm doing the same... replacing the floor. they are like 6 bolts holding the bed to the frame. youll wind up cutting them if you'e luck is anything like mine but it's not a big deal to replace. good luck!!!

**Daddy Brim** · 01-19-2014, 09:51 AM

Very nice truck, and a big block to I like it. On the tape over the spid. You might try taking the lid off and putting it in the freezer, some adhesives will brittle and let go. I would not use water.

Shocks · 02-03-2014, 10:32 PM

Got my center caps on and painted the wheels.

hugger6933 · 02-03-2014, 10:46 PM

Nice truck, Great find when you go to take the bedside off the floor, a little tip, don't loosen the bedside attaching bolts. Tighten them that way they will snap right off so easy with very little effort and resistance. There are several places to find a new steel floor out there now, of course it could also be changed over to a wood floor bed as well. Love them big blocks, as long as you don't have to feed them. Jim

72BlckButy · 02-03-2014, 10:47 PM

I dig it!

01-10-2014, 03:12 PM	#1
Shocks Registered User Join Date: Jan 2014 Location: Longview, Texas Posts: 53	Picked up my first C10 Just picked up my first C10. It's rough but runs decent. It has 396 badges on the side. I cannot read the tag on glovebox do to someone covering it in masking tape years ago. Having a really hard time removing the tape without destroying the sticker. I will post more pictures this weekend. Attached Images

01-10-2014, 03:27 PM	#2
bigmac73 Senior Member Join Date: Mar 2012 Location: Chesapeake, Va Posts: 1,275	Re: Picked up my first C10 Looks good and solid from this picture __________________ Mike 72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider. 421 SBC / TH350 3000RPM Stall Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks

01-10-2014, 03:27 PM	#3
ho70 Registered User Join Date: Nov 2013 Location: Winnipeg, Mb Posts: 1,115	Re: Picked up my first C10 wet the tape and may break apart with rubbing

01-10-2014, 03:45 PM	#4
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: Picked up my first C10 Very nice .

01-10-2014, 04:24 PM	#5
oldschool18 Registered User Join Date: Jan 2010 Location: Hollidaysburg, PA Posts: 785	Re: Picked up my first C10 Nice find and welcome to the board! __________________ _________________________________ 62 Impala 70 C-10 LWB 71 K-10 SWB 85 C-10 LWB==SOLD 01 2500 HD Members Met......2003Silverado (Dave)

01-10-2014, 04:52 PM	#6
Shocks Registered User Join Date: Jan 2014 Location: Longview, Texas Posts: 53	Re: Picked up my first C10 I need to replace the metal bed floor. I see that the bed floor is bolted on the sides and the front of the bed. But how is attached on the rear? I have been looking at this truck for seven years before the owner decided to sell it to me.

01-10-2014, 05:01 PM	#7
RenoKeene Florida Edition Join Date: Oct 2010 Location: Fruitland Park, FL Posts: 4,021	Re: Picked up my first C10 Welcome from Florida also. __________________ 70 GMC Short Stepside "Rose"-An American Beauty: Factory 402/TH400, AM/FM, AC, Tilt, Tach, Buckets, Posi, PS, PB, 3-5 Drop, Complete Resto-Rod 67 C-20 Slant Back Wrecker "Mad Max" 67 C-10 Ratrod "Step-N-Wolf" 71 Serro Scotty Sportsman camper "Scotty" 97 LT1 Z28 "The Hornet" Link to more pics of "Rose" http://67-72chevytrucks.com/vboard/a...p?albumid=1684 Check out my "Cheap Tricks" thread and add to it if you can, lots of good info there. http://67-72chevytrucks.com/vboard/s...d.php?t=489394

01-10-2014, 08:38 PM	#9
Mathew21 Senior Member Join Date: May 2010 Location: Clinton township, MI Posts: 1,192	Re: Picked up my first C10 Nice truck.

01-10-2014, 08:59 PM	#10
SeTx67 Registered User Join Date: May 2013 Location: Lumberton, TX Posts: 795	Re: Picked up my first C10 Nice find

01-10-2014, 09:51 PM	#11
Tinkermc Registered User Join Date: Jul 2011 Location: Farmville, Va Posts: 3,026	Re: Picked up my first C10 Welcome to the Forum and it's nice you brought a good truck and pic's.

01-10-2014, 10:03 PM	#12
yuccales Registered User Join Date: May 2011 Location: Northern Calif. Posts: 3,644	Re: Picked up my first C10 Good lookin' rig you got there!

01-11-2014, 12:44 PM	#13
chrisestes Registered User Join Date: Apr 2007 Location: Austin Texas Posts: 138	Re: Picked up my first C10 nice truck

01-11-2014, 01:10 PM	#14
1911a1 Registered User Join Date: Apr 2005 Location: Winnsboro, Texas Posts: 86	Re: Picked up my first C10 Nice pickup! I live about 50 miles from you, over in Winnsboro. Good luck with your new project.

01-11-2014, 01:59 PM	#15
trkfrk Registered User Join Date: Jul 2010 Location: Las Vegas, NV Posts: 969	Re: Picked up my first C10 Looks like a solid truck. Welcome to the forum. __________________ Mark 1972 C10 SWB LS1/T56 6 speed trans/4:56 posi with 5.5"-7" static drop/Boss 338 Wheels 18"x20" My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=424609. My first start up http://youtu.be/R899YQ1OcjU

01-11-2014, 05:42 PM	#16
Shocks Registered User Join Date: Jan 2014 Location: Longview, Texas Posts: 53	Re: Picked up my first C10 Thanks!! I went ahead and threw a different wheels and tires on it. Need to find some center caps. Attached Images



Register or Log In To remove these advertisements.

01-11-2014, 05:49 PM	#17
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: Picked up my first C10 Welcome! Very nice project. I can't wait to see it as you get it to where you want. __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

01-18-2014, 07:13 PM	#18
Shocks Registered User Join Date: Jan 2014 Location: Longview, Texas Posts: 53	Re: Picked up my first C10 Front end shot Attached Images

01-19-2014, 12:12 AM	#19
CC69Rat Senior Member Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,206	Re: Picked up my first C10 Nice looking truck ! Welcome to the board from TN. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

01-19-2014, 09:14 AM	#20
FRANKENSTEINC10 Registered User Join Date: Dec 2013 Location: DALLAS, TX Posts: 268	Re: Picked up my first C10 awesome truck man.

01-19-2014, 09:26 AM	#21
bean Registered User Join Date: Jun 2002 Location: Fort Worth, TX Posts: 915	Re: Picked up my first C10 nice truck!!! on the bed floor i'm doing the same... replacing the floor. they are like 6 bolts holding the bed to the frame. youll wind up cutting them if you'e luck is anything like mine but it's not a big deal to replace. good luck!!!

01-19-2014, 09:51 AM	#22
Daddy Brim Senior Member Join Date: Feb 2011 Location: Clovis Ca. Posts: 632	Re: Picked up my first C10 Very nice truck, and a big block to I like it. On the tape over the spid. You might try taking the lid off and putting it in the freezer, some adhesives will brittle and let go. I would not use water. __________________ I'm sorry I called you stupid. I thought you knew already. 67 C-20 Custom Camper 68 Nova 396 it does wheelies 2005 Buick Century the one the wife drives 1989 Toyota Tercel to drive when I can't put gas in the first 2.

02-03-2014, 10:32 PM	#23
Shocks Registered User Join Date: Jan 2014 Location: Longview, Texas Posts: 53	Re: Picked up my first C10 Got my center caps on and painted the wheels. Attached Images

02-03-2014, 10:46 PM	#24
hugger6933 Registered User Join Date: Oct 2008 Location: Marianna Arkansas Posts: 7,261	Re: Picked up my first C10 Nice truck, Great find when you go to take the bedside off the floor, a little tip, don't loosen the bedside attaching bolts. Tighten them that way they will snap right off so easy with very little effort and resistance. There are several places to find a new steel floor out there now, of course it could also be changed over to a wood floor bed as well. Love them big blocks, as long as you don't have to feed them. Jim

02-03-2014, 10:47 PM	#25
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Picked up my first C10 I dig it! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

Register or Log In To remove these advertisements.