Score - Blazer Parts Find - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LUV2XCLR8 · 04-07-2005, 04:12 PM

WELL IT'S STILL IN THE WORKS SO I DO NOT HAVE ANY PIC'S YET, BUT I
POSTED A THREAD A WHILE BACK, SORRY COULD NOT FIND IT IN SEARCH,
ABOUT A BUDDY IN OHIO THAT HAS 3 69-72 BLAZERS, SAW HIM AGAIN IN
THE PLANT TODAY, WE TALKED ABOUT WHAT HE HAS AND DOESN'T HAVE,
AND WHAT HE IS NOT SURE ABOUT, HE IS GOING DOWN TO HIS FARM ON
SATURDAY, HE IS GOING TO REMOVE EVERYTHING THAT MIGHT BE WORTH
SOMETHING AND BRING IT TO ME, AND THEN I WILL TAKE PIC'S, LIST THE
STUFF, PACKAGE, AND SELL IT FOR HIM, SOME OF THE STUFF HE IS SURE
ABOUT ARE AS FOLLOWS AND IN NO PARTICULAR ORDER OF VALUE.

FACTORY ROLL BAR - TEAM HARVEY WILL HAVE FIRST DIBS ON IT

FACTORY SWING AWAY TIRE CARRIER - COMPLETE W/ BOLTS AND ALL

BUCKET SEAT BRACKETS - SEATS ARE TRASHED BEYOND REPAIRS

REAR SEAT HOLD DOWN BRACKETS - FRONT ONES / MAYBE BACK'S TO

DRIVER & PASSENGER SEAT BELTS - TAN OR PARCH? (HE'S NOT SURE)

NEITHER ONE OF THEM HAVE TOPS, NEITHER ONE OF THEM ARE FOR SALE
AS OF RIGHT NOW, & NEITHER ONE OF THEMS TRANS / T.CASE R FOR SALE,
BUT IF THERE IS SOMETHING ELSE YOU ARE LOOKING FOR JUST REPLY HERE
AND I WILL TRY TO SEE WHAT ELSE IS AVAILABLE, NO PM'S PLEASE.

MIDSTATE__67-72 · 04-07-2005, 05:27 PM

looking for a nice set of saddle colored rear interior panels and saddle console lid

...o yeah seat backs too

c-1072 · 04-07-2005, 06:06 PM

got a rust free windshield frame ?

Illinois CST · 04-07-2005, 07:08 PM

Hey guys, don't wan't to step on any toes, but I'd like to be second in line if Team Harvey doesn't want the roll bar and second if you have a windshield frame. Thanks, Willie

Ring Master · 04-07-2005, 07:14 PM

I need good doors.

RED72blazer · 04-07-2005, 08:41 PM

are you sure the seats are trashed? i don't care about the foam, only the seat frames. i don't even need brackets.

I need/want

One good seat frame
heater control panel
rear side panel brackets
good condition inner grill for 72
tranny/x-fer case skid plate with crossmember.
factory antenna

meathead95 · 04-07-2005, 09:43 PM

i could use the brackets off of the rear of the back seat

thekidd · 04-07-2005, 10:13 PM

Hey Luv put me in line for the swingaway tire carrier. Remember now I am just a poor farm boy!

T HAUS · 04-07-2005, 10:48 PM

I can use the front REAR seat hold down brackets if he's got em.

3 on the tree · 04-07-2005, 11:31 PM

I'm looking for a decent steering wheel- 70 K5, brown or tan color. I know its a long shot but WTF. Thanks

daves71k5 · 04-08-2005, 12:28 AM

I would like to get in line also for the swing away tire carrier, I really only need the brackets to mount it to the body and gate but would take it all too.
Let me know a price and shipping to 83211.
thanks Dave

71jimmy · 04-08-2005, 03:09 AM

Pardon my intrusion, don't mean to steal the thread, just want to help if I can.

daves71k5 - if the swing away doesn't make it to you and you still need just the brackets, I have a set I took off my Jimmy. Let me know, I can take pictures and you can see if they are what you need.

badpeanut · 04-08-2005, 07:51 AM

I'm looking for the metal strips that hold the weatherstrip on to the body on the vertical edges where the tailgate closes against it. They are attached with about four phillips head screws, and I think they are the same from side to side. I need two.

fern · 04-08-2005, 01:42 PM

I ned the same thing Badpeanut does(i.e. the vertcal strips for weather stripping by tailgate). Also, in addition the rear carpet trim if in good condition. Thanks Fern....

fern · 04-08-2005, 01:42 PM

["I'm looking for the metal strips that hold the weatherstrip on to the body on the vertical edges where the tailgate closes against it. They are attached with about four phillips head screws, and I think they are the same from side to side. I need two".

]I need the same thing Badpeanut does (i.e. the vertcal strips for weather stripping by tailgate). Also, in addition the rear carpet trim if in good condition. If possible.. Thanks Fern....

[/QUOTE]

chucks70 · 04-08-2005, 09:40 PM

Put me in line for the swing away tire carrier and roll bar please.

teamharvey · 04-08-2005, 11:59 PM

Roll bar is sold

LUV2XCLR8 · 04-09-2005, 08:00 AM

Quote:

Originally Posted by teamharvey

Roll bar is sold

ASSUMING IT IS THE CORRECT ONE, I GUESS THAT MEANS YOU WANT IT

(SOON AS I GET PIC'S OF IT HARVE I WILL POST THEM, FINGERS CROSSED)

P.S. - THIS GUY IS A LIL SLOW AT GETTING BACK TO ME, IT COULD BE
SEVERAL WEEKS ON THIS STUFF, + I DON'T HAVE HIS CELL #, STUPID
ME EH, OH WELL, AS SOON AS GETS BACK TO ME W/ WHATEVER HE IS
BRINGING I WILL GET THE PIC'S AND POST THE PARTS, THEN I'LL GIVE
HIM THE REQUESTS FOR SOME OF THE OTHER STUFF MENTIONED.

SHIPPING FOR ALL PARTS WILL ORIGINATE FROM 38305 AND VIA FEDEX,
EXCEPT FOR THE ROLL BAR, AND MAYBE TIRE SWING AWAY IT DEPENDS
ON WHERE IT IS GOING, SOME STUFF I CAN GET SOME PLACES CHEAP.

thekidd · 04-10-2005, 08:15 PM

No problem for me Luv just holler at me when you find out something. I'm right beside you so maybe we can work something out on delivery of tire carrier. PM me with price whenever you figure out what you want for it thanks.

teamharvey · 04-10-2005, 10:14 PM

Yes, I want it and am in no hurry. Did you get my PM on shipping locations ?

Bret

LUV2XCLR8 · 04-10-2005, 10:29 PM

Quote:

Originally Posted by teamharvey

Yes, I want it and am in no hurry. Did you get my PM on shipping locations ?

Bret

YUP, STILL CHECKING INTO IT, L.A. IS THE EASIEST PLACE FOR ME
TO GET STUFF FOR NEXT TO NUTHING, I'LL GET BACK TO YA.

teamharvey · 04-10-2005, 10:40 PM

L.A. is 5+ hours from me !

69TowRig · 04-10-2005, 11:23 PM

If one really is a '69 and has a good inner grille (not broken at all, longshot I know) then I would like to get that.

Also looking for a front driveshaft from a 3-speed/spicer 20 combo.

krue · 04-11-2005, 02:36 AM

top of the windshield frame. Need to convert a p/u

**tnblazerk5** · 04-11-2005, 08:28 AM

does he have a v8 4x4 motor crossmember ? if so how much ? and if he does is it possible you can have it by the truck thing in pigon forge ?

04-07-2005, 04:12 PM	#1
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	Score - Blazer Parts Find WELL IT'S STILL IN THE WORKS SO I DO NOT HAVE ANY PIC'S YET, BUT I POSTED A THREAD A WHILE BACK, SORRY COULD NOT FIND IT IN SEARCH, ABOUT A BUDDY IN OHIO THAT HAS 3 69-72 BLAZERS, SAW HIM AGAIN IN THE PLANT TODAY, WE TALKED ABOUT WHAT HE HAS AND DOESN'T HAVE, AND WHAT HE IS NOT SURE ABOUT, HE IS GOING DOWN TO HIS FARM ON SATURDAY, HE IS GOING TO REMOVE EVERYTHING THAT MIGHT BE WORTH SOMETHING AND BRING IT TO ME, AND THEN I WILL TAKE PIC'S, LIST THE STUFF, PACKAGE, AND SELL IT FOR HIM, SOME OF THE STUFF HE IS SURE ABOUT ARE AS FOLLOWS AND IN NO PARTICULAR ORDER OF VALUE. FACTORY ROLL BAR - TEAM HARVEY WILL HAVE FIRST DIBS ON IT FACTORY SWING AWAY TIRE CARRIER - COMPLETE W/ BOLTS AND ALL BUCKET SEAT BRACKETS - SEATS ARE TRASHED BEYOND REPAIRS REAR SEAT HOLD DOWN BRACKETS - FRONT ONES / MAYBE BACK'S TO DRIVER & PASSENGER SEAT BELTS - TAN OR PARCH? (HE'S NOT SURE) NEITHER ONE OF THEM HAVE TOPS, NEITHER ONE OF THEM ARE FOR SALE AS OF RIGHT NOW, & NEITHER ONE OF THEMS TRANS / T.CASE R FOR SALE, BUT IF THERE IS SOMETHING ELSE YOU ARE LOOKING FOR JUST REPLY HERE AND I WILL TRY TO SEE WHAT ELSE IS AVAILABLE, NO PM'S PLEASE. __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T Last edited by LUV2XCLR8; 04-07-2005 at 04:14 PM.

04-07-2005, 05:27 PM	#2
MIDSTATE__67-72 Senior Member Join Date: Oct 2004 Location: decatur, il Posts: 199	rear interior panels looking for a nice set of saddle colored rear interior panels and saddle console lid ...o yeah seat backs too Last edited by MIDSTATE__67-72; 04-07-2005 at 05:28 PM.

04-07-2005, 06:06 PM	#3
c-1072 Registered User Join Date: Sep 2004 Location: rochester NY Posts: 777	windshield frame got a rust free windshield frame ?

04-07-2005, 07:08 PM	#4
Illinois CST Registered User Join Date: Sep 2003 Location: Venedy, IL Posts: 25	Hey guys, don't wan't to step on any toes, but I'd like to be second in line if Team Harvey doesn't want the roll bar and second if you have a windshield frame. Thanks, Willie __________________ 1970 Blazer CST 350 700R4

04-07-2005, 07:14 PM	#5
Ring Master The Anti-Rice Join Date: May 2000 Location: Bartlett,TX Posts: 224	I need good doors. __________________ I MUD IN RICE PATTIES! (Mud Frog) 1972 K5,454,SM465/NP205 ,18" Over Stock,41" GH Tires, D60/14BFF,on a custom twin framerail tube chassis. (RICE KILLA) 1972 Chevelle 325 LM7 w/TR224 cam/ 2002 T56 6 Speed,4 wheel power disc,12 bolt w/ eaton & 3.55 (DD) 99 Dodge CTD 4x4 Short Bed

04-07-2005, 08:41 PM	#6
RED72blazer urban fourwheelin Join Date: Aug 2002 Location: Seattle Posts: 1,007	are you sure the seats are trashed? i don't care about the foam, only the seat frames. i don't even need brackets. I need/want One good seat frame heater control panel rear side panel brackets good condition inner grill for 72 tranny/x-fer case skid plate with crossmember. factory antenna __________________ 1972 K5 Blazer with Cummins 4BT, NV4500 swap in the parts gathering stage.

04-07-2005, 09:43 PM	#7
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	i could use the brackets off of the rear of the back seat __________________ 72 2wd blazer 72 swb 4x4

04-07-2005, 10:13 PM	#8
thekidd Registered User Join Date: Oct 2004 Location: Piedmont of North Carolina Posts: 196	Hey Luv put me in line for the swingaway tire carrier. Remember now I am just a poor farm boy! __________________ thekidd 95 Silverado 2000 Suburban 4x4 91 Nissan 4x4 65 Impala SS (Mom and Dads now mine) 1971 K5 Blazer(Father and son project) 1972 2WD Blazer

04-07-2005, 10:48 PM	#9
T HAUS Registered User Join Date: Nov 2003 Location: SW Missouri Posts: 111	I can use the front REAR seat hold down brackets if he's got em. __________________ 1966 Chevy C-10 1970 Chevy K-5 Blazer 4x4 1972 Chevy K-5 Blazer 4x4 2003 2500HD GMC Duramax/Allison 4x4 Full 4 Door Last edited by T HAUS; 04-07-2005 at 10:49 PM.

04-07-2005, 11:31 PM	#10
3 on the tree Registered User Join Date: Oct 2004 Posts: 393	I'm looking for a decent steering wheel- 70 K5, brown or tan color. I know its a long shot but WTF. Thanks

04-08-2005, 12:28 AM	#11
daves71k5 Registered User Join Date: Jan 2002 Location: American Falls, Idaho-USA Posts: 318	swing away carrier I would like to get in line also for the swing away tire carrier, I really only need the brackets to mount it to the body and gate but would take it all too. Let me know a price and shipping to 83211. thanks Dave

04-08-2005, 03:09 AM	#12
71jimmy Registered User Join Date: Mar 2004 Location: Sacramento, CA Posts: 1,084	Pardon my intrusion, don't mean to steal the thread, just want to help if I can. daves71k5 - if the swing away doesn't make it to you and you still need just the brackets, I have a set I took off my Jimmy. Let me know, I can take pictures and you can see if they are what you need. __________________ '71 Jimmy, 350, SM465, NP205, 2in Tuff Country lift, 33s on rallies, TBI, softtop and hardtop "If life was fair you'd be able to afford one of each and a garage large enough to house them all."

04-08-2005, 07:51 AM	#13
badpeanut Not a bad nut after all.. Join Date: Dec 2000 Location: ND Posts: 1,756	I'm looking for the metal strips that hold the weatherstrip on to the body on the vertical edges where the tailgate closes against it. They are attached with about four phillips head screws, and I think they are the same from side to side. I need two.

04-08-2005, 01:42 PM	#14
fern Registered User Join Date: Mar 2005 Location: Kansas City, MO Posts: 33	I ned the same thing Badpeanut does(i.e. the vertcal strips for weather stripping by tailgate). Also, in addition the rear carpet trim if in good condition. Thanks Fern....

04-08-2005, 09:40 PM	#16
chucks70 Registered User Join Date: Feb 2002 Location: Cadiz, OH Posts: 628	Put me in line for the swing away tire carrier and roll bar please. __________________ 68 1 ton dually 292, 2001 Sebring, 2004 Trailblazer, 11 Camaro Convertible.



Register or Log In To remove these advertisements.

04-08-2005, 11:59 PM	#17
teamharvey Registered User Join Date: Jul 2004 Location: Turlock, Ca Posts: 579	Roll bar is sold __________________ 71 Custom 20 Deluxe..soon to be SWB 1/2 ton 1 incredible wife 2 great kids

04-10-2005, 08:15 PM	#19
thekidd Registered User Join Date: Oct 2004 Location: Piedmont of North Carolina Posts: 196	No problem for me Luv just holler at me when you find out something. I'm right beside you so maybe we can work something out on delivery of tire carrier. PM me with price whenever you figure out what you want for it thanks. __________________ thekidd 95 Silverado 2000 Suburban 4x4 91 Nissan 4x4 65 Impala SS (Mom and Dads now mine) 1971 K5 Blazer(Father and son project) 1972 2WD Blazer

04-10-2005, 10:14 PM	#20
teamharvey Registered User Join Date: Jul 2004 Location: Turlock, Ca Posts: 579	Yes, I want it and am in no hurry. Did you get my PM on shipping locations ? Bret __________________ 71 Custom 20 Deluxe..soon to be SWB 1/2 ton 1 incredible wife 2 great kids

04-10-2005, 10:40 PM	#22
teamharvey Registered User Join Date: Jul 2004 Location: Turlock, Ca Posts: 579	L.A. is 5+ hours from me ! __________________ 71 Custom 20 Deluxe..soon to be SWB 1/2 ton 1 incredible wife 2 great kids

04-10-2005, 11:23 PM	#23
69TowRig Senior Member Join Date: Jan 2005 Location: Raleigh, NC Posts: 894	If one really is a '69 and has a good inner grille (not broken at all, longshot I know) then I would like to get that. Also looking for a front driveshaft from a 3-speed/spicer 20 combo.

04-11-2005, 02:36 AM	#24
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	top of the windshield frame. Need to convert a p/u __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

04-11-2005, 08:28 AM	#25
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	does he have a v8 4x4 motor crossmember ? if so how much ? and if he does is it possible you can have it by the truck thing in pigon forge ?

Register or Log In To remove these advertisements.