|
12-17-2009, 03:26 PM
|
#1 |
|
Registered User
Join Date: Sep 2009
Location: Marianna, Florida
Posts: 339
|
Update with Pics
Well, if the pics work, you will see my 63 in close to finished for now form. I bought it months ago with no real plan other than to enjoy it. I put in a hot 350, 350 trans, and aluminum radiator. I rebuilt all the drum brakes and put on a dual res. master cylinder. Did some quickie bodywork and flat blacked it with Sherwin Williams flat black industrial paint (32 buck a gallon ready to spray
 ) The wheels are early 15 x 8 gm with 215 up front and 295-50 on back. Still have to upgrade to disc and do the interior, and put on the aluminim heads, but it's been a ball so far. 
Last edited by onequickchevy; 12-17-2009 at 03:28 PM. |
|
|
|
12-17-2009, 03:29 PM
|
#2 |
|
Registered User
Join Date: Dec 2009
Location: daytona beach fl
Posts: 187
|
Re: Update with Pics
looks good
were did you git the paint what are you using to spray it thanks
__________________
61 step/long bed SBW(SOLD) NEED A NEW PROJECT |
|
|
|
|
12-17-2009, 03:34 PM
|
#3 |
|
Registered User
Join Date: Sep 2009
Location: Marianna, Florida
Posts: 339
|
Re: Update with Pics
The paint came from our local Sherwin Williams ( same place I buy my interior and exterior house panit from). They sell industrial paint as well. I sprayed it with a Devilbliss HVLP gun at about 28 psi. Sprayed good, but do not thin it. It says it can be thinned, but I found out it works better not thinned at all. Covers good and dries quick. You can also touch it up easliy and it blends in well. Doubles as a mobile chalkboard too
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
