Seat cover came today!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lowriden58 · 07-18-2008, 09:34 PM

Well i bought the "cheapy" one from LMC for 149 and i gotta say its a good fit and feels comfy

also got their black seat belts too

I also was working on my daily driver today replacing the A/C evaporator ALL DAY

i never wanna replace another one in a chrysler again

here is some before and after pics

BTW this was my first time ever doing this...

lowriden58 · 07-18-2008, 09:34 PM

Longhorn Man · 07-18-2008, 09:36 PM

not too shabby!
I always wanted to try my hand at that... but too scared.
How long did it take you? First try at this?

lowriden58 · 07-18-2008, 09:42 PM

well to be honest im not sure on exact time it took as i was taking breaks from the chrysler

but i would say prolly 2hrs total. the screws holding the back to the bottom are a PITA to remove

other than that it went very smooth. i let the covers sit outside for a few hrs while i worked on the car, that way the covers were very soft

Tip on removing the screws from the sides.. ( take 2 large craftsman philips head screwdrivers and weld the in a cross pattern) gives you great leverage

also spray some PB blaster on them and let it sit for about 30mins ahead of time

Husker · 07-18-2008, 09:52 PM

Looks NICE, I will send my seats to you when I am ready.
LOL
Ron

lowriden58 · 07-18-2008, 09:58 PM

if it didnt cost an arm and a leg to ship it to me i would say lets do it!

now i just need to fix the rust around the windshield (inside) then paint the inside of the cab. get some carpet, door seals, yadda yadda

72BlckButy · 07-19-2008, 12:04 AM

Nice work! Were you happy with the quality of the seat cover?

**FRENCHBLUE72** · 07-19-2008, 09:44 AM

Nice work that new cover looks great..

Premium72 · 07-19-2008, 10:12 AM

cool

lowriden58 · 07-19-2008, 11:56 AM

Quote:

Originally Posted by 72BlckButy

Nice work! Were you happy with the quality of the seat cover?

yeah it kinda took me by suprize

i would recommend LMC

airdale94 · 07-19-2008, 01:19 PM

Quote:

Originally Posted by lowriden58

Tip on removing the screws from the sides.. ( take 2 large craftsman philips head screwdrivers and weld the in a cross pattern) gives you great leverage

also spray some PB blaster on them and let it sit for about 30mins ahead of time

Another idea for removing screws is a impact driver. It has different screw head bits and what you do is hit it with a hammer and it applies twisting force impact. Or some of the screw drivers have a hex lug on them up by the handle so you can get a wrench on them.

straitnate14 · 07-19-2008, 03:06 PM

do they have one that doesnt have any patterns in it, just like your blue one but black?

lowriden58 · 07-20-2008, 11:09 AM

Quote:

Originally Posted by straitnate14

do they have one that doesnt have any patterns in it, just like your blue one but black?

they do have one without any scrolling, it has larger spacing between the pleats tho.

07-18-2008, 09:34 PM	#1
lowriden58 Registered User Join Date: Jan 2008 Location: Chesapeake Beach, MD Posts: 812	Seat cover came today!! Well i bought the "cheapy" one from LMC for 149 and i gotta say its a good fit and feels comfy also got their black seat belts too I also was working on my daily driver today replacing the A/C evaporator ALL DAY i never wanna replace another one in a chrysler again here is some before and after pics BTW this was my first time ever doing this... __________________ 71 cheyenne lwb 300rwhp best 1/4 time so far 12.8 @103 http://i195.photobucket.com/albums/z...en58/001-2.jpg

07-18-2008, 09:34 PM	#2
lowriden58 Registered User Join Date: Jan 2008 Location: Chesapeake Beach, MD Posts: 812	Re: Seat cover came today!! __________________ 71 cheyenne lwb 300rwhp best 1/4 time so far 12.8 @103 http://i195.photobucket.com/albums/z...en58/001-2.jpg

07-18-2008, 09:36 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Seat cover came today!! not too shabby! I always wanted to try my hand at that... but too scared. How long did it take you? First try at this?

07-18-2008, 09:42 PM	#4
lowriden58 Registered User Join Date: Jan 2008 Location: Chesapeake Beach, MD Posts: 812	Re: Seat cover came today!! well to be honest im not sure on exact time it took as i was taking breaks from the chrysler but i would say prolly 2hrs total. the screws holding the back to the bottom are a PITA to remove other than that it went very smooth. i let the covers sit outside for a few hrs while i worked on the car, that way the covers were very soft Tip on removing the screws from the sides.. ( take 2 large craftsman philips head screwdrivers and weld the in a cross pattern) gives you great leverage also spray some PB blaster on them and let it sit for about 30mins ahead of time __________________ 71 cheyenne lwb 300rwhp best 1/4 time so far 12.8 @103 http://i195.photobucket.com/albums/z...en58/001-2.jpg

07-18-2008, 09:52 PM	#5
Husker Registered User Join Date: Dec 1999 Location: Mid NE USA Posts: 2,212	Re: Seat cover came today!! Looks NICE, I will send my seats to you when I am ready. LOL Ron __________________ Member #111 68 C-10 Daily Driver 70 4x4 Project 76 Jeep CJ-5 Help Support the Board: http://67-72chevytrucks.com/vboard/payments.php He who knows nothing is closer to the truth than he whose mind is filled with falsehoods and errors. Thomas Jefferson

07-18-2008, 09:58 PM	#6
lowriden58 Registered User Join Date: Jan 2008 Location: Chesapeake Beach, MD Posts: 812	Re: Seat cover came today!! if it didnt cost an arm and a leg to ship it to me i would say lets do it! now i just need to fix the rust around the windshield (inside) then paint the inside of the cab. get some carpet, door seals, yadda yadda __________________ 71 cheyenne lwb 300rwhp best 1/4 time so far 12.8 @103 http://i195.photobucket.com/albums/z...en58/001-2.jpg

07-19-2008, 12:04 AM	#7
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Seat cover came today!! Nice work! Were you happy with the quality of the seat cover? __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

07-19-2008, 09:44 AM	#8
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,604	Re: Seat cover came today!! Nice work that new cover looks great.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-19-2008, 10:12 AM	#9
Premium72 Registered User Join Date: Sep 2005 Location: Villa Rica Ga Posts: 889	Re: Seat cover came today!! cool __________________ WombatFire, Art-Design-MADNESS Follow My Build and Adventures on Instagram

07-19-2008, 03:06 PM	#12
straitnate14 Registered User Join Date: Feb 2008 Location: Bartonville IL Posts: 415	Re: Seat cover came today!! do they have one that doesnt have any patterns in it, just like your blue one but black? __________________ ΜΟΛΩΝ ΛΑΒΕ Last edited by straitnate14; 07-19-2008 at 03:08 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.