|
06-25-2024, 07:05 PM
|
#1 |
|
New Member
 Join Date: Sep 2023
Location: Sunol, CA
Posts: 8
|
Burning up plug wires
I have a set of Hedman headers on LT1 Heads. Existing plugs are ATL26.
One lead is shorting to the header. Bought a ceramic replacement but cannot get it on the plug. There is about .25 inch clearance between the plug end and the header....its too tight to get the ceramic on there. Is there a shorter plug I can use? Or other suggestions? Thanks Tim |
|
|
| Bookmarks |
|
|
Threaded Mode