Steering stops for porterbuilt arms and CPP spindles

[kitsbeach]

Hey I have installed porterbuilt tubular arms on my '67 truck and the tires rub on the shocks when I turn the wheel lock to lock.

I'm running 15" steel wheels and 235 tires and CPP modular 2" drop spindles.

Has anyone added a steering stop to their arms.?

Or is there supposed to be a steering stop on the CPP spindles.?

[1moretoy]

Originally Posted by kitsbeach

Hey I have installed porterbuilt tubular arms on my '67 truck and the tires rub on the shocks when I turn the wheel lock to lock.

I'm running 15" steel wheels and 235 tires and CPP modular 2" drop spindles.

Has anyone added a steering stop to their arms.?

Or is there supposed to be a steering stop on the CPP spindles.?

I'm currently trying to come up with something myself. Let me know if you figure anything out.

[twcoley]

The spindles should have stop arms cast into the rear side of the spindles, my guess is that the Porterbuilt arms my not have the stop plate on them.

[kitsbeach]

Originally Posted by twcoley

The spindles should have stop arms cast into the rear side of the spindles, my guess is that the Porterbuilt arms my not have the stop plate on them.

Thank you. You are right. I may try to build my own stops after I get their sway bar (which is custom to their arms, you can't use stock sway bar).

[MMiller1050]

I also am looking for a solution as I am having the same exact issue. No steering stops. If anyone has details on where to put some good aftermarket steering stops into Porterbuilt lower tubular arms it would be great.

Thank you,
M Miller