One Piece Outer Floor Sections - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jb4short · 09-12-2007, 08:12 AM

No more piece-mealing outer floors together. We now offer this one piece outer floor section to make your repairs cleaner and easier

$59.95ea. in our store at http://www.tri-proautomotive.com

Musclerodz · 09-12-2007, 12:17 PM

Installing a set of those in the Blazer as we speak.

Mike

jb4short · 09-12-2007, 12:28 PM

Quote:

Originally Posted by Musclerodz

Installing a set of those in the Blazer as we speak.

Mike

I gotta be honest Mike...I wish I'd remembered they were out here before sending Nathan the individual pieces....it occured to me while looking through his Blazer build pics (DOH!...don't tell him)

Musclerodz · 09-12-2007, 03:17 PM

Gonna require some modification at the rear door for the Blazer, but the only way to correctly fix the rust. The bad part is how many pieces are spot welded to this part. Thank god they need fixed as well.

Mike

RicksTrucks · 09-12-2007, 03:18 PM

where exactly does this go?

meathead95 · 09-12-2007, 03:59 PM

its the inner rocker and floor edge by the door weatherstriping. this will be much nicer then having to piece the front and rear together.

Musclerodz · 09-12-2007, 04:50 PM

This is the COMPLETE outer floor and inner rocker. Way better than POS flat panel that has been sold for the inner rocker repair panel for years. I will have pics of the installation of this part in my sheetmetal repair thread in the blazer forum

Mike

jb4short · 09-12-2007, 06:03 PM

Thanks for jumping in with the explanation...we're out here cleaning for the open house Saturday. You wouldn't believe how much fine black dirt can build up where it looks clean

xshadow · 09-12-2007, 06:34 PM

any lwb bedsides yet?

jb4short · 09-12-2007, 08:15 PM

Quote:

Originally Posted by xshadow

any lwb bedsides yet?

LOL...three times in three days-

The sample is supposed to ship the 20th. After test fit the first production run should be done and then they'll ship.

panhandler62 · 09-12-2007, 09:30 PM

Sweet.. not quite ready for cab parts yet.. but I'll be there with bells on (right after I buy a welder)

**special-K** · 09-13-2007, 05:53 AM

This is how Mr. Factory made his floor pans.So a pat on the back for Mr. Partsmaker.

72GMCburban · 09-13-2007, 07:24 AM

I gotta tell ya I was pretty excited to see this part come out. After piecing a repair together, this is going to be really nice to use.

**lks dcvn** · 09-13-2007, 08:06 AM

Can we see a few shots of one other than the one posted?

I would like to see the piece from a few angles if that is possible.

Thanks.

Lks Dcvn

Thealien · 09-13-2007, 08:12 AM

I also have a set of those for my Jimmy. Looks like a good quality part.

Mark

Musclerodz · 09-13-2007, 11:16 AM

Quote:

Originally Posted by lks dcvn

Can we see a few shots of one other than the one posted?

I would like to see the piece from a few angles if that is possible.

Thanks.

Lks Dcvn

here are the only pics I have on them I took to put in my online store. I will be posting picks of them being installed hopefully in a couple of days

Mike

krue · 09-13-2007, 01:31 PM

Gotta remember this!

nplocoman · 09-13-2007, 03:35 PM

Some rough in pic's. One shows inner piece one shows with outer rocker on And one shows the supervisor of the job. I have not been able to work on this for a while due to shoulder surgery.

nplocoman · 09-13-2007, 03:37 PM

I might add that the fit and quality is top notch

67ChevyRedneck · 09-13-2007, 03:46 PM

Is the metal as thick as stock?

jb4short · 09-13-2007, 03:47 PM

great pictures....

can you come do this one...LOL

nplocoman · 09-13-2007, 03:53 PM

Yes. It is as thick as stock and maybe a little thicker but I did not gage it. As fare as fixing the other one I will ask the supervisor!! I can take a few more pic's when the sun is at a different angle if any one wants to see more.

RicksTrucks · 09-13-2007, 03:59 PM

I will have to go measure the holes in my floor to see if this will cover the optional pavement viewing area.

About how many inches does it cover from the edge of the rocker to the end of the new patch panel?

nplocoman · 09-13-2007, 04:05 PM

From the outter lip of the outside rocker is 3 3/4" In toward the center of the cab

jb4short · 09-13-2007, 04:32 PM

I mic'd the metal on my cab at .077" and the panel is .071"...there may be another layer of paint vapor on the cab

09-12-2007, 08:12 AM	#1
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	One Piece Outer Floor Sections No more piece-mealing outer floors together. We now offer this one piece outer floor section to make your repairs cleaner and easier $59.95ea. in our store at http://www.tri-proautomotive.com

09-12-2007, 12:17 PM	#2
Musclerodz Senior Member Join Date: Aug 2005 Location: OKC, OK Posts: 2,365	Re: One Piece Outer Floor Sections Installing a set of those in the Blazer as we speak. Mike __________________ Mike Redpath

09-12-2007, 03:17 PM	#4
Musclerodz Senior Member Join Date: Aug 2005 Location: OKC, OK Posts: 2,365	Re: One Piece Outer Floor Sections Gonna require some modification at the rear door for the Blazer, but the only way to correctly fix the rust. The bad part is how many pieces are spot welded to this part. Thank god they need fixed as well. Mike __________________ Mike Redpath Last edited by Musclerodz; 09-12-2007 at 03:18 PM.

09-12-2007, 03:18 PM	#5
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,640	Re: One Piece Outer Floor Sections where exactly does this go? __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

09-12-2007, 03:59 PM	#6
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	Re: One Piece Outer Floor Sections its the inner rocker and floor edge by the door weatherstriping. this will be much nicer then having to piece the front and rear together. __________________ 72 2wd blazer 72 swb 4x4

09-12-2007, 04:50 PM	#7
Musclerodz Senior Member Join Date: Aug 2005 Location: OKC, OK Posts: 2,365	Re: One Piece Outer Floor Sections This is the COMPLETE outer floor and inner rocker. Way better than POS flat panel that has been sold for the inner rocker repair panel for years. I will have pics of the installation of this part in my sheetmetal repair thread in the blazer forum Mike __________________ Mike Redpath

09-12-2007, 06:03 PM	#8
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: One Piece Outer Floor Sections Thanks for jumping in with the explanation...we're out here cleaning for the open house Saturday. You wouldn't believe how much fine black dirt can build up where it looks clean

09-12-2007, 06:34 PM	#9
xshadow Registered User Join Date: Apr 2006 Location: va Posts: 553	Re: One Piece Outer Floor Sections any lwb bedsides yet?

09-12-2007, 09:30 PM	#11
panhandler62 Java Mechanic Join Date: Jun 2005 Location: Martinsburg, WV Posts: 6,764	Re: One Piece Outer Floor Sections Sweet.. not quite ready for cab parts yet.. but I'll be there with bells on (right after I buy a welder) __________________ Keith 11 Lincoln MKT -- Momma's wagon 13 G37xS -- middle age crazy car 68 C20 Fleetside -- RIP Decorating the whole town up at a cost of $27 ....

09-13-2007, 05:53 AM	#12
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: One Piece Outer Floor Sections This is how Mr. Factory made his floor pans.So a pat on the back for Mr. Partsmaker. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-13-2007, 07:24 AM	#13
72GMCburban Registered User Join Date: Oct 2006 Location: Fort Worth Posts: 306	Re: One Piece Outer Floor Sections I gotta tell ya I was pretty excited to see this part come out. After piecing a repair together, this is going to be really nice to use. __________________ --Mike http://rides.webshots.com/album/551997543JkYiXF

09-13-2007, 08:06 AM	#14
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,339	Re: One Piece Outer Floor Sections Can we see a few shots of one other than the one posted? I would like to see the piece from a few angles if that is possible. Thanks. Lks Dcvn

09-13-2007, 08:12 AM	#15
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,123	Re: One Piece Outer Floor Sections I also have a set of those for my Jimmy. Looks like a good quality part. Mark

09-13-2007, 01:31 PM	#17
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: One Piece Outer Floor Sections Gotta remember this! __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

09-13-2007, 03:35 PM	#18
nplocoman never finish start another Join Date: Mar 2007 Location: North Platte Nebraska Posts: 432	Re: One Piece Outer Floor Sections Some rough in pic's. One shows inner piece one shows with outer rocker on And one shows the supervisor of the job. I have not been able to work on this for a while due to shoulder surgery. Attached Images



Register or Log In To remove these advertisements.

09-13-2007, 03:37 PM	#19
nplocoman never finish start another Join Date: Mar 2007 Location: North Platte Nebraska Posts: 432	Re: One Piece Outer Floor Sections I might add that the fit and quality is top notch

09-13-2007, 03:46 PM	#20
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: One Piece Outer Floor Sections Is the metal as thick as stock? __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

09-13-2007, 03:47 PM	#21
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: One Piece Outer Floor Sections great pictures.... can you come do this one...LOL

09-13-2007, 03:53 PM	#22
nplocoman never finish start another Join Date: Mar 2007 Location: North Platte Nebraska Posts: 432	Re: One Piece Outer Floor Sections Yes. It is as thick as stock and maybe a little thicker but I did not gage it. As fare as fixing the other one I will ask the supervisor!! I can take a few more pic's when the sun is at a different angle if any one wants to see more. Last edited by nplocoman; 09-13-2007 at 03:59 PM.

09-13-2007, 03:59 PM	#23
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,640	Re: One Piece Outer Floor Sections I will have to go measure the holes in my floor to see if this will cover the optional pavement viewing area. About how many inches does it cover from the edge of the rocker to the end of the new patch panel? __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

09-13-2007, 04:05 PM	#24
nplocoman never finish start another Join Date: Mar 2007 Location: North Platte Nebraska Posts: 432	Re: One Piece Outer Floor Sections From the outter lip of the outside rocker is 3 3/4" In toward the center of the cab

09-13-2007, 04:32 PM	#25
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: One Piece Outer Floor Sections I mic'd the metal on my cab at .077" and the panel is .071"...there may be another layer of paint vapor on the cab

Register or Log In To remove these advertisements.