Clutch Pedal & Fork - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Knothead · 01-07-2009, 07:41 PM

Does anybody know where I can locate the correct pedal for a '56? The splines on the one I have doesn't mesh with the cross shaft at the correct angle. Also which release fork will work with the original setup? I found one on evil bay for $70.00!!! , lists a bunch of different applications for it, Want to make sure it will work.

Caveman49 · 01-08-2009, 12:08 AM

Are you just needing the pedal arm, or what? I have a 56 parts truck.

Knothead · 01-08-2009, 02:10 PM

I just need the actual pedal your foot comes in contact with.Also the release fork that clips in bellhousing.

Caveman49 · 01-09-2009, 08:23 PM

I'll check the 56 I have in the back, see what's there. I'll get back with you tomorrow.

OrrieG · 01-10-2009, 04:45 PM

I still have the stock clutch linkage setup for my 59 and will not be using it. Didn't know it was worth $70, LOL. If Caveman can't help you pm me.

Knothead · 01-10-2009, 06:07 PM

Thanks Guys ,I'll check back later.

Knothead · 01-28-2009, 04:02 PM

I did find a clutch fork that looks like the correct part, GM # 839240. Description says for earlier model car?

renegade6 · 01-29-2009, 12:55 PM

I may have an extra brake pedal I could make you a really good deal on. If I don't have one now, I will shortly when I convert to a firewall M/C.

OrrieG · 01-29-2009, 01:09 PM

Quote:

Originally Posted by Knothead

I did find a clutch fork that looks like the correct part, GM # 839240. Description says for earlier model car?

I did a search online and at stovebolt and found the same thing. Difference is probably the bellhousing. There was some discussion about pivot points being different but I could not find a specific place that told which would interchange. You might go to www.stovebolt.com and ask the question over there.

01-07-2009, 07:41 PM	#1
Knothead Registered User Join Date: Mar 2007 Location: south carolina Posts: 247	Clutch Pedal & Fork Does anybody know where I can locate the correct pedal for a '56? The splines on the one I have doesn't mesh with the cross shaft at the correct angle. Also which release fork will work with the original setup? I found one on evil bay for $70.00!!! , lists a bunch of different applications for it, Want to make sure it will work. Last edited by Knothead; 01-07-2009 at 07:52 PM. Reason: grammer

01-08-2009, 12:08 AM	#2
Caveman49 Registered User Join Date: Jun 2007 Location: Alabama Posts: 78	Re: Clutch Pedal & Fork Are you just needing the pedal arm, or what? I have a 56 parts truck.

01-08-2009, 02:10 PM	#3
Knothead Registered User Join Date: Mar 2007 Location: south carolina Posts: 247	Re: Clutch Pedal & Fork I just need the actual pedal your foot comes in contact with.Also the release fork that clips in bellhousing.

01-09-2009, 08:23 PM	#4
Caveman49 Registered User Join Date: Jun 2007 Location: Alabama Posts: 78	Re: Clutch Pedal & Fork I'll check the 56 I have in the back, see what's there. I'll get back with you tomorrow.

01-10-2009, 04:45 PM	#5
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: Clutch Pedal & Fork I still have the stock clutch linkage setup for my 59 and will not be using it. Didn't know it was worth $70, LOL. If Caveman can't help you pm me. __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project

01-10-2009, 06:07 PM	#6
Knothead Registered User Join Date: Mar 2007 Location: south carolina Posts: 247	Re: Clutch Pedal & Fork Thanks Guys ,I'll check back later.

01-28-2009, 04:02 PM	#7
Knothead Registered User Join Date: Mar 2007 Location: south carolina Posts: 247	Re: Clutch Pedal & Fork I did find a clutch fork that looks like the correct part, GM # 839240. Description says for earlier model car?

01-29-2009, 12:55 PM	#8
renegade6 Registered User Join Date: Nov 2008 Location: Texarkana, TX Posts: 443	Re: Clutch Pedal & Fork I may have an extra brake pedal I could make you a really good deal on. If I don't have one now, I will shortly when I convert to a firewall M/C. __________________ Brandon 63 Biscayne https://www.pro-touring.com/threads/90718-63-Biscayne 57 Chevy Truck (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=321380 72 K20 Long bed stepside (wife's) 72 K20 Long bed 396 (flip or keep...?) The latest build: http://67-72chevytrucks.com/vboard/s...76#post8438476



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.