![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: May 2015
Location: Richland, WA
Posts: 128
|
66 C10 Power Brake Question
Hello,
I know there are some great threads on swaps but I want tomake sure before I go buy something, again, I can't use. ugg! My fault...no one elses. http://67-72chevytrucks.com/vboard/s...d.php?t=367260 Anyway, there's an 86 C10 5 lug donor that has power brakes and disks. What can I take from this for my stock truck? Power brake booster/master? Disks and spindles? Control arms? What else should I take? Thank you. Dan |
![]() |
![]() |
![]() |
#2 |
Senior Member
![]() Join Date: Aug 2012
Location: Somewhere In So. IL.
Posts: 409
|
Re: 66 C10 Power Brake Question
Depends on the route you want to go. If you want disc brakes & stock ride height, grab the spindles, calipers, rotors. The calipers can be used as cores if not usable. Be aware that the rotors & calipers can be either 1" or 1 1/4". The spindle is different between the two, so you can't put thicker rotors on the thin style spindle.
Unless you want to upgrade to the newer style bushings, your control arms will work. Just use the same year ball joints as the spindle. Simple remove the old, replace with new. To use the 86 outer tie rod, an adapter sleeve will be needed to go with the older inner tie rod. I'm not sure how to mount the booster to your firewall. I'll be using a Captfab bracket to mount a booster along with his plate to mount the same year steering box. If you grab all the steering linkage from tie rod to tie rod with the steering box, pitman and idler arm, that will all fit with just the idler arm holes needing to be redrilled. Keep in mind, being an 86 & being 29 years old, parts will need replaced. The center link, unless bent, will be usable. It's a non wear item. While doing this, please upgrade the u bolts holding the lower arms on. Use the replacements for the 86. They will be larger diameter, needing the holes drilled out. The smaller stock ones are notorious for breaking. I lived in your neck of the woods for about 3 years, well, in W. Richland ... beautiful country.
__________________
Doug Old Build Thread - 383/T56 http://www.67-72chevytrucks.com/vboa...d.php?t=540838 Updated Build Thread - Modern Relic - 66 C10 536 Dark Aqua 5.3/4L60E - BTR Stage IV Truck Cam - Vintage Air - Dakota Digital http://67-72chevytrucks.com/vboard/s...d.php?t=778784 |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: May 2015
Location: Richland, WA
Posts: 128
|
Re: 66 C10 Power Brake Question
Thank you Doug. That's exactly what I was needing.
|
![]() |
![]() |
![]() |
#4 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,247
|
Re: 66 C10 Power Brake Question
X2 on what Doug had to say.
If you must use the '86 booster, you will have to drill holes to mount it to your firewall. I'm not sure where those holes will come out on the inside as I have never used one of those on a '60-'66 truck. Using that booster will also not give you the solid connection between the booster/master and the pedal bracket as it will when using the factory mounting holes as my booster bracket does.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
![]() |
![]() |
![]() |
Bookmarks |
Tags |
disk brake conversions, front end swap |
|
|