Quick hub cap question

[LIVE RUST]

Could anyone tell me if this older style cap(beautiful green truck) will fit or can be made to fit the later model steel wheel (crappy primered truck)

[jocko]

it will fit without modification. both are of the 10+1/8" variety. I have both caps above - and they both fit on my stock 66 chev steelies. It will not fit over the 4wd hubs though. You'd need a 64-66 truck 4wd front hub cap (has a hole just like the later models in your pic above does)

JUST to clarify, since I can't really tell in the 4wd yellow pic - I'm ASSUMING those are 6 lug steelies of the 6 or 8" wide variety. If, by chance, those a re 3/4 ton (8 lug) on the yellow truck - then those caps are around 12" and the ones on the green truck will not fit those. If both have an approximate 10+1/8" measurement outer nub to outer nub, then you are good to go.

[LIVE RUST]

They are 6 lug wheels. If they fit, I was planning on hole sawing out the fronts if I cant find the correct ones. Thanks Jocko

[jocko]

yep, that should work, however, might check the for sale ads for some 4wd front caps to avoid a jagged edge. I'd bet dollars to donuts that if there aren't any for sale on the board here that tony at 4-5-6 has a pair laying around (don't quote me on that, but he might be able to help). http://www.4-5-6chevytrucks.com/