|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
09-25-2013, 11:54 PM
|
#1 |
|
Registered User
Join Date: Jul 2013
Location: Hayden, ID
Posts: 12
|
Noob question about model year differences
A local guy has a great deal on CL for new carpet that fits a '76. I have a '82. Suppliers indicate there is a difference after '81. Is it a major difference or just factory color changes? Would carpet for a '76 fit in my '82?
|
|
|
|
09-26-2013, 06:07 PM
|
#2 | |
|
just can't cover up my redneck
Join Date: May 2004
Location: Columbus OH
Posts: 11,414
|
Re: Noob question about model year differences
2 wheel drive? or 4? Stick or automatic?
Those answers are going to matter,especially the 4 wheel drive part. The carpet shape itself should be the same, but the shifter locations may not be, plus there is the "high hump" versus "low hump" factor. Four speed trucks and all 4x4s have high hump floors, 2 wheel drive automatics should be low hump.
__________________
You can review the site's rules here. Quote:
Bad planning on your part does not necessarily constitute an instant emergency on my part.... The great thing about being a pessimist is that you are either pleasantly surprised or right. 
|
|
|
|
|
|
09-26-2013, 08:44 PM
|
#3 |
|
Registered User
Join Date: Jul 2007
Location: Ontario Canada
Posts: 1,006
|
Re: Noob question about model year differences
76 carpet would have the hole for the dimmer switch in it, 82 is on the column.
__________________
 1985 C10 2004 Avalanche |
|
|
|
|
09-26-2013, 09:18 PM
|
#4 |
|
Registered User
Join Date: Jan 2013
Location: Jasper, IN
Posts: 948
|
Re: Noob question about model year differences
That's nothing a razor blade won't take care of. On a side note my 77 c30 with a 4spd was a low hump?
Posted via Mobile Device
__________________
When in doubt, throttle it out! 1974 Chevrolet Custom K20 2005 Ford Ranger Edge 1985 Chevrolet Custom Deluxe C10 |
|
|
|
|
09-26-2013, 10:22 PM
|
#5 | |
|
Registered User
Join Date: Sep 2009
Location: Beaverton, OR from WA State
Posts: 1,515
|
Re: Noob question about model year differences
Quote:
__________________
Devin 1983 GMC High Sierra 2500, 4x4, RC/LB, 400 S.B., SM-465, NP-208, Corporate 10 bolt & 9.5" 14 bolt 1996 GMC Sierra SLE 3500 DRW, 4x4, EC/LB, Vortec 454, NV-4500, BW-4401, AAM 925 & AAM 1050 1997 GMC Sierra SLT 1500 4x4, Z71/F44, EC/SB, Vortec 350 My Introduction with my '83s History New Daily, the '96 |
|
|
|
|
09-27-2013, 04:27 AM
|
#6 | |
|
Registered User
Join Date: Jul 2007
Location: Ontario Canada
Posts: 1,006
|
Re: Noob question about model year differences
Quote:
__________________
1985 C10 2004 Avalanche |
|
|
|
|
|
09-27-2013, 10:20 AM
|
#7 |
|
Registered User
Join Date: May 2012
Location: Colo Springs, CO
Posts: 870
|
Re: Noob question about model year differences
There is a break in the blazers for sure (back flooring area behind driver's seat), but the pickup may be the same. I'd also just verify 2wd/4wd and then go and compare.
How good a deal is it? Stockinteriors.com is $119 http://www.stockinteriors.com/AutoCa...=31&ModelId=88 I used them for my entire blazer and it turned out great! Supplier is actually ACC. Very happy with purchase! FYI, I'm from the Spokane/CDA area and have a place on Hayden.....family has been there since the 40's. 
__________________
- Jeff 89' K5 Blazer, 2.5" lift, 35" tires 04' GMC Yukon XL, 3/4 ton, 8.1L Last edited by Ski-me; 09-27-2013 at 10:25 AM. |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
