CA Cleaning out the garage and parting a 1985 and 1975 chevy truck out!!!!

[renorev4fizzle]

Pricing updated again! life issue force liquidation of all items! every offer will be considered as long as we are all fair to each other!!!


PRICING HAS BEEN UPDATED TO MOVE THIS STUFF QUICKLY!!!!!!! 5-2-14

Hey guys and gals, I have a ton of stuff for sale and would like to move it quickly as I am trying to build my dream crawler. I am open to trades but only for items to get me rolling on my project.

I am located in the south Bay Area of California, San Jose (Campbell).

I am open to trades for the following:

I am looking for a 6bt Cummins 12 or 24 valve with 5-6speed manual complete with pedal hanger and all hydraulics, bell housing, clutch and shifter, lockers and gears for Dana 60 and 14 bolt Chevy, preferably around 5.38 or so. Need one Detroit for the 14 bolt and one ARB or (any selectable locker) for the 60. Allison 1000 trans, 4 coil overs 14-16” travel, triple stick cable shifter, suspension seats, tubing bender and notcher, Plasma cutter……Worst I can say is no thanks!

Big ticket items below with pricing: Pricing is OBO,

1. 4-20x10 KMC XD “Diesel” wheels with 40 inch Nitto mud grapplers 2% tread. Tires are smoked. $300
2. 8 lug chevy Dana 44 1981 vintage $75-SOLD
3. Chevy 14 Bolt with 3:21 gear ratio $200SOLD
4. TH400 2WD, complete with torque converter $100
5. 6 inch lift for ½ton Chevy trucks (52 inch rear springs with add a leafs and 2.5 inch blocks and steering correction for push pull steering.) $100
6. DIY4X B-52 front spring mounts $150SOLD!
7. DIY4X movable spring plates and Dana 60 U-bolts $35 SOLD!
8. DIY4X 6 inch swing shackle and upgraded swing shackle mount $50 SOLD!
9. 8 “ front lift leaf springs-brand new, brand new bushings $100
10. 2-1975 Chevy C-20 factory rear springs-56'S $25.00
11. 2-1985 Chevy C-30 factory rear springs-56'S $25.00
12. Good factory 2WD steering gear $20.00
13. Good Factory 4WD steering gear $20.00
14. Factory 4x4 cross member 1975 Chevy $20
15. Factory motor mount braces for 1975 Chevy $10
16. 1973-87 Chevy truck saddle tanks 3 pairs of them. Including senders and frame brackets-$25.00 pair of tanks
17. Straight 1975 Chevy C-20 Fleet side Long bed complete with tailgate $300
18. Straight 1985 Chevy C-30 Camper Special Dually bed with tailgate with small amount of rust, easily fixable. $400.SOLD
19. 1981 Straight Chevy C-10 Fleet side Short bed- no tailgate or front panel $300-SOLD
20. Perfect 1975 Chevy front clip 90% complete $200SOLD
21. Perfect 1985 front Clip 100% complete $400-SOLD
22. Complete Rust free Single cab no title $300-SOLD
23. 90% Complete factory trim for a 1975 C-20 long bed crew cab $150SOLD
24. 90% complete factory interior panels for a 1975 crewcab $150
25. Complete uncut factory wiring harness for entire 1975 crew cab $200
26. (2) Complete (no compressor) factory A/C and heater components $50 ea
27. 1975 tilt steering column with keys $100.00
28. 2 piece crew cab long bed 2wd drive shaft $50.00
29. Heavy duty 1975-87 sway bar $50.00
30. Front bumper, 1981 good condition $50
31. Rear bumper, towing, 1985 good condition $25
32. Rear bumper, 1975, perfect condition $75
33. 1975 right and left cab floor patch panels $150.00 for both
34. Good used RH wing window $50.00
35. Brand new NOS GM wing window still in original packaging $150.00SOLD!
36. Perfect 1975 Chevy hub caps $50.00
37. 1981 Power window glass and regulators (4) $25.00 EA
38. Interior parts-Quoted as needed SEE THE PHOTOS FOR EVERYTHING I HAVE.


Send me a PM for anything you need that may not be listed above. I probably have it still!

All pricing does not include shipping. I have access to freight shipping and can crate and ship just about everything on this list. The Beds will need o be disassembled and shipped or picked up. All freight is the responsibility of the buyer.



PHOTOS CAN BE FOUND HERE:http://s1313.photobucket.com/user/re...zle/slideshow/

[f.monroe]

I will take #35 the NOS wing window. Shipping to a business addy in Bryan,Tx 77808 or residential in Caldwell ,Tx 77836.
Thanks ,
Frank

[renorev4fizzle]

PM sent for shipping cost. Item #35. sold!

Originally Posted by f.monroe

I will take #35 the NOS wing window. Shipping to a business addy in Bryan,Tx 77808 or residential in Caldwell ,Tx 77836.
Thanks ,
Frank

[76on44s]

what model are the b52s for?

[beerbeer95648]

Im in Placerville. I am in need of a bench seat for my 78 K20. Are you selling the one pictured? PM sent.

[renorev4fizzle]

Originally Posted by 76on44s

what model are the b52s for?

the b-52 brackets are for the 1975.

[renorev4fizzle]

Originally Posted by beerbeer95648

Im in Placerville. I am in need of a bench seat for my 78 K20. Are you selling the one pictured? PM sent.

PM replied.

[too much stuff]

Interested in number 36 if they are 12" stainless caps.

[renorev4fizzle]

i will check to see if they are stainless or aluminum.

Originally Posted by too much stuff

Interested in number 36 if they are 12" stainless caps.

[renorev4fizzle]

All pricing is negotiable Ladies and Gentlemen! i need everything gone!

[l1l]

how about the rear sliding window shipped to business address in FL 34238? how could it is btw?

[l1l]

also the upper right front fender trim ?

it's the one in top





here is a pic of the rear sliding window

[renorev4fizzle]

PM Sent.

Originally Posted by l1l

also the upper right front fender trim ?

it's the one in top





here is a pic of the rear sliding window

[tinydb84]

Hey from West San Jose! I have been thinking of converting to a short bed....how nice is the bed?

[renorev4fizzle]

PM sent!

Originally Posted by tinydb84

Hey from West San Jose! I have been thinking of converting to a short bed....how nice is the bed?

[f.monroe]

I made payment using paypal. Let me know when it ships. I added the business address in the PayPal payment . Thanks.

[renorev4fizzle]

Thank you Sir! i will ship on Monday and send you the details then.

Originally Posted by f.monroe

I made payment using paypal. Let me know when it ships. I added the business address in the PayPal payment . Thanks.

[renorev4fizzle]

Monday Bump! help me out guys!!!

[76on44s]

Originally Posted by renorev4fizzle

the b-52 brackets are for the 1975.

Do they fit in the factory holes? Bottom dollar with shipping?

[79Betty]

Number 9 the lift springs shipped to 47586? If not too bad i'll take em

[renorev4fizzle]

PM sent.

Originally Posted by 76on44s

Do they fit in the factory holes? Bottom dollar with shipping?

[renorev4fizzle]

PM sent!

Originally Posted by 79Betty

Number 9 the lift springs shipped to 47586? If not too bad i'll take em

[f.monroe]

Do you have the tracking number for the wing window?
Thanks
Frank

[bob_o]

I'm interested in item #27 ('75 Tilt Column) if it's still available? Please and thanks!

[renorev4fizzle]

Bob_o,

yes it is available still.

Originally Posted by bob_o

I'm interested in item #27 ('75 Tilt Column) if it's still available? Please and thanks!